F1-03 |
Standard Specification for Nickel-Clad and Nickel-Plated Steel
Strip for Electron Tubes |
电子管用镀镍和敷镍钢带 |
F3-02a |
Standard Specification for Nickel Strip for Electron Tubes |
电子管镍带 |
F4-66(2005) |
Standard Specification for Carbonized Nickel Strip and
Carbonized Nickel-Plated and Nickel-Clad Steel Strip for Electron Tubes |
电子管用碳化镍条及碳化镀镍和包镍钢条 |
F7-95(2006) |
Standard Specification for Aluminum Oxide Powder |
氧化铝粉末 |
F14-80(2005) |
Standard Practice for Making and Testing Reference Glass-Metal
Bead-Seal |
标准玻璃金属压条密封胶的生产和试验 |
F15-04 |
Standard Specification for Iron-Nickel-Cobalt Sealing Alloy |
铁-镍-钴密封合金 |
F16-67(2006) |
Standard Test Methods for Measuring Diameter or Thickness of
Wire and Ribbon for Electronic Devices and Lamps |
电子器件和电灯用电线及带条的直径或厚度测量方法 |
F17-02 |
Standard Terminology Relating to Flexible Barrier Materials |
与柔性阻挡层材料相关的术语定义 |
F18-64(2006) |
Standard Specification and Test Method for Evaluation of
Glass-to-Metal Headers Used in Electron Devices |
电子设备用玻璃金属底板评定规范和试验方法 |
F19-64(2005)e1 |
Standard Test Method for Tension and Vacuum Testing Metallized
Ceramic Seals |
镀金属陶瓷密封件抗拉及真空试验方法 |
F21-65(2002) |
Standard Test Method for Hydrophobic Surface Films by the
Atomizer Test |
用雾化试验器作疏水表面薄膜的试验方法 |
F22-02 |
Standard Test Method for Hydrophobic Surface Films by the
Water-Break Test |
用水膜破裂试验作疏水表面薄膜的试验方法 |
F24-04 |
Standard Method for Measuring and Counting Particulate
Contamination on Surfaces |
表面颗粒状污染物的计数和测量方法 |
F25-04 |
Standard Test Method for Sizing and Counting Airborne
Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas |
电子及类似用途用的清洁室及其它防尘区域空气中粒状杂质的测量和计算方法 |
F29-97(2002) |
Standard Specification for Dumet Wire for Glass-to-Metal Seal
Applications |
玻璃与金属密封装置用杜美丝 |
F30-96(2002) |
Standard Specification for Iron-Nickel Sealing Alloys |
铁镍密封合金 |
F31-05 |
Standard Specification for 42% Nickel-6% Chromium-Iron Sealing
Alloy |
42%镍,6%铬铁密封合金 |
F34-02 |
Standard Practice for Construction of Test Cell for Liquid
Extraction of Flexible Barrier Materials |
挠性阻挡层材料液体提取实验台的结构 |
F36-99(2003) |
Standard Test Method for Compressibility and Recovery of Gasket
Materials |
垫片材料的压缩性及回弹性的试验方法 |
F37-00 |
Standard Test Methods for Sealability of Gasket Materials |
垫片材料的密封性的试验方法 |
F38-00 |
Standard Test Methods for Creep Relaxation of a Gasket
Material |
垫片材料的蠕变松驰作用的试验方法 |
F44-95(2006) |
Standard Specification for Metallized Surfaces on Ceramic |
陶瓷的金属化表面 |
F50-92(2001)e1 |
Standard Practice for Continuous Sizing and Counting of Airborne
Particles in Dust-Controlled Areas and Clean Rooms Using Instruments
Capable of Detecting Single Sub-Micrometre and Larger Particles |
使用能检测单个亚测微计及较大粒子的仪器在控制尘埃区域及无菌区中连续测定空气中悬浮粒子的大小及计数 |
F51-00(2002)e1 |
Standard Test Method for Sizing and Counting Particulate
Contaminant In and On Clean Room Garments |
在无菌室内衣服上颗粒污物的粒度测量与计数方法 |
F67-06 |
Standard Specification for Unalloyed Titanium, for Surgical
Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
外科植入用非合金钛 |
F68-05 |
Standard Specification for Oxygen-Free Copper in Wrought Forms
for Electron Devices |
电子装置用可锻无氧铜 |
F72-06 |
Standard Specification for Gold Wire for Semiconductor Lead
Bonding |
半导体引线连接用金丝线 |
F73-96(2002) |
Standard Specification for Tungsten-Rhenium Alloy Wire for
Electron Devices and Lamps |
电子器件及灯泡用钨铼合金丝 |
F75-01 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy
Castings and Casting Alloy for Surgical Implants (UNS R30075) |
外科植入设备用铸造钴铬钼合金(UNS R30075) |
F76-86(2002) |
Standard Test Methods for Measuring Resistivity and Hall
Coefficient and Determining Hall Mobility in Single-Crystal
Semiconductors |
测量单晶半导体的电阻率、霍尔系数及霍尔迁移率的试验方法 |
F78-97(2002) |
Standard Test Method for Calibration of Helium Leak Detectors by
Use of Secondary Standards |
使用二次标准件校正氦检漏仪的试验方法 |
F79-69(2005) |
Standard Specification for Type 101 Sealing Glass |
101型密封玻璃规范 |
F83-71(2002) |
Standard Practice for Definition and Determination of Thermionic
Constants of Electron Emitters |
电子发射器的热离子常数的规定和测定 |
F85-76(2002) |
Standard Practice for Nomenclature for Wire Leads Used as
Conductors in Electron Tubes |
电子管用导体引线的命名 |
F86-04 |
Standard Practice for Surface Preparation and Marking of
Metallic Surgical Implants |
金属外科植入物表面制备和标志 |
F88-06 |
Standard Test Method for Seal Strength of Flexible Barrier
Materials |
挠性隔栅材料的密封强度的测试方法 |
F90-01 |
Standard Specification for Wrought Cobalt-20 Chromium-15
Tungsten-10 Nickel Alloy for Surgical Implant Applications (UNS R30605) |
外科植入设备用锻制钴铬钨镍合金(UNS R30605) |
F91-70(2001)e1 |
Standard Practice for Testing for Leaks in the Filters
Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of
a Condensation Nuclei Detector |
用冷凝核探测器对层流无菌室及无菌工作站配备的过滤器进行检漏试验 |
F92-93(2003) |
Standard Practice for Determination of Character Yield of Inked
Fabric Typewriter and Printer Ribbons |
打字色带耐磨性的测定 |
F96-77(2005) |
Standard Specification for Electronic Grade Alloys of Copper and
Nickel in Wrought Forms |
锻制的铜和镍电子级合金 |
F97-72(2002)e1 |
Standard Practices for Determining Hermeticity of Electron
Devices by Dye Penetration |
用染料渗透法测定电子器件的密封性 |
F99-76(2001) |
Standard Practice for Preparation of Flexible Barrier Material
Specifications |
挠性阻挡层材料规范的制定 |
F104-03 |
Standard Classification System for Nonmetallic Gasket
Materials |
非金属衬垫材料分类系统 |
F105-72(2005) |
Standard Specification for Type 58 Borosilicate Sealing Glass |
58型硼硅酸盐密封玻璃 |
F106-06 |
Standard Specification for Brazing Filler Metals for Electron
Devices |
电子器件用铜焊填充金属 |
F109-04 |
Standard Terminology Relating to Surface Imperfections on
Ceramics |
与陶瓷表面缺陷相关的术语 |
F111-96(2002) |
Standard Practice for Determining Barium Yield, Getter Gas
Content, and Getter Sorption Capacity for Barium Flash Getters |
钡闪光消气剂的钡收获率、消气剂吸气量和消气剂吸着(能)力的测定 |
F112-00e1 |
Standard Test Method for Sealability of Enveloped Gaskets |
包封衬垫密封性的试验方法 |
F116-00(2004) |
Standard Specification for Medical Screwdriver Bits |
医疗用螺丝刀 |
F118-04 |
Standard Definitions of Terms Relating to Gaskets |
与衬垫相关的术语定义 |
F119-82(2002) |
Standard Test Method for Rate of Grease Penetration of Flexible
Barrier Materials (Rapid Method) |
挠性阻挡层材料润滑脂渗透率的试验方法 |
F129-97(2002) |
Standard Practice for Amount of Ink Deposit on Carbon Paper and
Inked Ribbons, Other Than Fabric Type |
复写纸和色带及其它织物上油墨沉积总值的试验方法 |
F136-02a |
Standard Specification for Wrought Titanium-6 Aluminum-4
Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant
Applications (UNS R56401) |
外科植入设备用锻制钛6铝4钒特低杂质合金(UNS R56401) |
F137-03 |
Standard Test Method for Flexibility of Resilient Flooring
Materials with Cylindrical Mandrel Apparatus |
用圆柱形芯轴装置对弹性地板材料韧性的试验方法 |
F138-03 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5
Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS
S31673) |
外科移植用不锈钢棒及丝(特级)(UNS S31673) |
F139-03 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5
Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS
S31673) |
外科移植用不锈钢薄板及带(特级)(UNS S31673) |
F140-98(2003) |
Standard Practice for Making Reference Glass-Metal Butt Seals
and Testing for Expansion Characteristics by Polarimetric Methods |
偏振法测定膨胀特性用的参考玻璃与金属对接密封材料的制作与试验 |
F141-04 |
Standard Terminology Relating to Resilient Floor Coverings |
弹性地板覆盖物术语 |
F142-93(2000)e1 |
Standard Test Method for Indentation of Resilient Floor Tiles
(McBurney Test) |
弹性地板覆盖物刻压测试方法(麦克伯尼试验) |
F144-80(2005) |
Standard Practice for Making Reference Glass-Metal Sandwich Seal
and Testing for Expansion Characteristics by Polarimetric Methods |
偏振法测定膨胀特性用的参考玻璃金属夹层密封材料的制作与试验 |
F145-72(2003) |
Standard Practice for Evaluating Flat-Faced Gasketed Joint
Assemblies |
平面衬垫连接件的评定 |
F146-04 |
Standard Test Methods for Fluid Resistance of Gasket
Materials |
垫片材料抗流体性能的测试方法 |
F147-87(2003) |
Standard Test Method for Flexibility of Non-Metallic Gasket
Materials |
非金属衬垫材料挠性试验方法 |
F148-02 |
Standard Test Method for Binder Durability of Cork Composition
Gasket Materials |
软木合成垫料粘合耐久性的测试方法 |
F149-92b(2003) |
Standard Terminology Relating to Optical Character
Recognition |
与光学字符识别相关的术语 |
F150-98 |
Standard Test Method for Electrical Resistance of Conductive and
Static Dissipative Resilient Flooring |
导电弹性地板材料电阻试验方法 |
F152-95(2002) |
Standard Test Methods for Tension Testing of Nonmetallic Gasket
Materials |
非金属垫料抗拉试验的测试方法 |
F153-95(2002) |
Standard Test Method for Determining the Yield of Wide Inked
Computer Ribbons |
计算机宽油墨色带耐磨性的试验方法 |
F180-94(2005) |
Standard Test Method for Density of Fine Wire and Ribbon Wire
for Electronic Devices |
电子装置用细金属线和带状金属线密度的测试方法 |
F204-76(2002) |
Standard Test Method for Surface Flaws in Tungsten Seal Rod and
Wire |
密封钨丝和钨条表面裂纹的试验方法 |
F205-94(2005) |
Standard Test Method for Measuring Diameter of Fine Wire by
Weighing |
用称量法测定细金属丝直径的测试方法 |
F218-05 |
Standard Test Method for Analyzing Stress in Glass |
玻璃应力分析的试验方法 |
F219-96(2002) |
Standard Test Methods of Testing Fine Round and Flat Wire for
Electron Devices and Lamps |
电子器件和电灯用细圆丝和扁线的试验方法 |
F221-98(2003) |
Standard Terminology Relating to Carbon Paper and Inked Ribbon
Products and Images Made Therefrom |
与复写纸,色带制品以及所产生的图案相关的术语定义 |
F256-05e1 |
Standard Specification for Chromium-Iron Sealing Alloys with 18
or 28 Percent Chromium |
含有18%或26%铬的铬铁密封合金 |
F269-60(2002) |
Standard Test Method for Sag of Tungsten Wire |
钨丝弯曲度的试验方法 |
F288-96(2002) |
Standard Specification for Tungsten Wire for Electron Devices
and Lamps |
电子器件和电灯用钨丝 |
F289-96(2002) |
Standard Specification for Molybdenum Wire and Rod for
Electronic Applications |
电子设备用钼丝及钼条 |
F290-94(2005) |
Standard Specification for Round Wire for Winding Electron Tube
Grid Laterals |
绕制电子管栅极支线用圆线 |
F302-04 |
Standard Practice for Field Sampling of Aerospace Fluids in
Containers |
容器中航空航天流体的现场取样 |
F303-02 |
Standard Practices for Sampling for Particles in Aerospace
Fluids and Components |
元部件中航空航天流体的取样 |
F307-02 |
Standard Practice for Sampling Pressurized Gas for Gas
Analysis |
气体分析用压力气体的取样 |
F309-04 |
Standard Practice for Liquid Sampling of Noncryogenic Aerospace
Propellants |
非冷冻航空航天推进剂的液体取样 |
F310-04 |
Standard Practice for Sampling Cryogenic Aerospace Fluids |
冷冻的航空航天流体的取样 |
F311-97(2002) |
Standard Practice for Processing Aerospace Liquid Samples for
Particulate Contamination Analysis Using Membrane Filters |
用膜滤器进行粒状污染物分析用航空航天流体样品的处理 |
F312-97(2003) |
Standard Test Methods for Microscopical Sizing and Counting
Particles from Aerospace Fluids on Membrane Filters |
膜滤器上航空流体中颗粒微观大小的测定及计数 |
F316-03 |
Standard Test Methods for Pore Size Characteristics of Membrane
Filters by Bubble Point and Mean Flow Pore Test |
通过起泡点和平均流动孔试验描述膜过滤器的孔大小特征的试验方法 |
F318-06 |
Standard Practice for Sampling Airborne Particulate
Contamination in Cleanrooms for Handling Aerospace Fluids |
处理航空航天流体用无菌室中空气粒子污染物取样 |
F319-91a(2003) |
Standard Practice for Polarized Light Detection of Flaws in
Aerospace Transparency Heating Elements |
航空航天用透明加热元件中裂纹的偏振光检测 |
F320-05 |
Standard Test Method for Hail Impact Resistance of Aerospace
Transparent Enclosures |
航空和航天透明外壳抗冰雹撞击性的测试方法 |
F326-96(2001)e2 |
Standard Test Method for Electronic Measurement for Hydrogen
Embrittlement from Cadmium-Electroplating Processes |
镀镉工艺用电子氢脆试验方法 |
F327-78(2000) |
Standard Practice for Sampling Gas Blow Down Systems and
Components for Particulate Contamination by Automatic Particle Monitor
Method |
用自动粒子监控器对气体排污系统和部件的粒子污染物取样的规程 |
F328-98(2003) |
Standard Practice for Calibration of an Airborne Particle
Counter Using Monodisperse Spherical Particles |
用接近单分散球形粒子材料测定空气中粒子计数器的计数和尺寸的准确性 |
F330-89(2004) |
Standard Test Method for Bird Impact Testing of Aerospace
Transparent Enclosures |
航空航天透明外壳撞鸟试验的试验方法 |
F331-05 |
Standard Test Method for Nonvolatile Residue of Solvent Extract
from Aerospace Components (Using Flash Evaporator) |
从航空航天部件中提取的卤化溶剂的不挥发残渣的试验方法(使用旋转瞬间蒸发器) |
F335-03 |
Standard Terminology Relating to Electrostatic Copying |
与静电复印相关的术语 |
F336-02 |
Standard Practice for Design and Construction of Nonmetallic
Enveloped Gaskets for Corrosive Service |
腐蚀作业用非金属包封衬垫的设计和结构 |
F355-01 |
Standard Test Method for Shock-Absorbing Properties of Playing
Surface Systems and Materials |
游动表面系统和材料吸收冲击性能的测试方法 |
F357-78(2002) |
Standard Practice for Determining Solderability of Thick Film
Conductors |
厚膜导体的软钎焊性测定 |
F358-83(2002) |
Standard Test Method for Wavelength of Peak Photoluminescence
and the Corresponding Composition of Gallium Arsenide Phosphide Wafers |
磷化砷化镓片的最大光致发光波长及其相应成分的试验方法 |
F360-82(2006) |
Standard Practice for Image Evaluation of Electrostatic Business
Copies |
静电办公复制品图象评定 |
F362-91(2005) |
Standard Test Method for Determining the Erasability of Inked
Ribbons |
测定油墨色带消磁性试验方法 |
F363-99(2004) |
Standard Test Method for Corrosion Testing of Gaskets |
衬垫的腐蚀试验方法 |
F364-96(2002) |
Standard Specification for Molybdenum Flattened Wire for
Electron Tubes |
电子管用扁平钼丝 |
F366-04 |
Standard Specification for Fixation Pins and Wires |
固定销钉及金属丝 |
F372-99(2003) |
Standard Test Method for Water Vapor Transmission Rate of
Flexible Barrier Materials Using an Infrared Detection Technique |
用红外线检查技术检查挠性隔栅材料水蒸气散发率的测试方法 |
F373-01 |
Standard Test Method for Embossed Depth of Resilient Floor
Coverings |
弹性地板覆盖物压纹深度的试验方法 |
F375-89(2005) |
Standard Specification for Integrated Circuit Lead Frame
Material |
集成电路引线框材料 |
F377-03 |
Standard Practice for Calibration of Braking/Tractive Measuring
Devices for Testing Tires |
校准充气轮胎试验用刹车力的测试方法 |
F381-05 |
Standard Safety Specification for Components, Assembly, Use, and
Labeling of Consumer Trampolines |
蹦床的元件,安装和使用.用户安全 |
F382-99(2003)e1 |
Standard Specification and Test Method for Metallic Bone
Plates |
金属骨板的静态弯曲特性的测试方法 |
F384-06 |
Standard Specifications and Test Methods for Metallic Angled
Orthopedic Fracture Fixation Devices |
钉板的静态弯曲试验 |
F386-02 |
Standard Test Method for Thickness of Resilient Flooring
Materials Having Flat Surfaces |
表面平坦的弹性地板铺面材料厚度的测试方法 |
F387-02 |
Standard Test Method for Measuring Thickness of Resilient Floor
Covering With Foam Layer |
带有泡沫层的弹性地板覆盖物厚度测量的方法 |
F390-98(2003) |
Standard Test Method for Sheet Resistance of Thin Metallic Films
With a Collinear Four-Probe Array |
用共线四探针法对金属薄膜的薄膜电阻的试验方法 |
F392-93(2004) |
Standard Test Method for Flex Durability of Flexible Barrier
Materials |
挠性阻挡层材料耐挠曲度的试验方法 |
F395-03 |
Standard Terminology Relating to Vacuum Cleaners |
与真空吸尘器相关的术语 |
F396-00(2004) |
Standard Practice for Comparing One-Time Noncorrectable
Typewriter Ribbons |
一次性不能校准的打字机色带比较 |
F400-04 |
Standard Consumer Safety Specification for Lighters |
打火机的安全使用规范 |
F402-05 |
Standard Practice for Safe Handling of Solvent Cements, Primers,
and Cleaners Used for Joining Thermoplastic Pipe and Fittings |
热塑性塑料管及配件接合用溶剂粘结剂、油漆腻子及清洁剂的安全操作规范 |
F403-98 |
Standard Test Method for Tires for Wet Traction in
Straight-Ahead Braking, Using Highway Vehicles |
测定公路车辆直线前进中刹车时轮胎湿磨擦力的试验方法 |
F404-04e1 |
Standard Consumer Safety Specification for High Chairs |
高脚椅的安全使用规范 |
F405-05 |
Standard Specification for Corrugated Polyethylene (PE) Pipe and
Fittings |
聚乙烯(PE)波纹软管及管配件 |
F406-06 |
Standard Consumer Safety Specification for Non-Full-Size Baby
Cribs/Play Yards |
娱乐场地的安全使用规范 |
F408-99 |
Standard Test Method for Tires for Wet Traction in
Straight-Ahead Braking, Using a Towed Trailer |
用拖挂车朝正前方制动时潮湿牵引用轮胎的测试方法 |
F409-02 |
Standard Specification for Thermoplastic Accessible and
Replaceable Plastic Tube and Tubular Fittings |
可卸可更换的热塑性塑料管和管配件 |
F410-02 |
Standard Test Method for Wear Layer Thickness of Resilient Floor
Coverings by Optical Measurement |
光学测量法对弹性地板覆盖物磨损层厚度的试验方法 |
F412-06 |
Standard Terminology Relating to Plastic Piping Systems |
与塑料管系统相关的术语 |
F414-06 |
Standard Test Method for Energy Absorbed by a Tire When Deformed
by Slow-Moving Plunger |
当轮胎因缓慢移动的插棒而变形时轮胎吸收能量的试验方法 |
F415-87(2005) |
Standard Test Method for Curl in Carbon Paper |
复写纸卷曲度的试验方法 |
F418-77(2002) |
Standard Practice for Preparation of Samples of the Constant
Composition Region of Epitaxial Gallium Arsenide Phosphide for Hall Effect
Measurements |
测量霍尔效应用恒定成分范围的外延磷化砷化镓试样的制备 |
F420-04 |
Standard Test Method for Access Depth Under Furniture of Vacuum
Cleaners |
真空吸尘器可伸入家具底部深度的测试方法 |
F421-00 |
Standard Test Method for Measuring Groove and Void Depth in
Passenger Car Tires |
轿车轮胎中的凹槽及孔隙深度的试验方法 |
F428-03a |
Standard Test Method for Intensity of Scratches on Aerospace
Glass Enclosures |
公路车辆在向前直线行驶中轮胎湿传动磨擦力的试验方法 |
F429-01 |
Standard Test Method for Shock-Attenuation Characteristics of
Protective Headgear for Football |
航空和航天用玻璃外壳抗划痕强度的试验方法 |
F430-05 |
Standard Test Methods for Paper Used for Vacuum Cleaner Filter
Bags |
橄榄球运动用防护头盔的减冲击性能的试验方法 |
F431-04 |
Standard Specification for Air Performance Measurement Plenum
Chamber for Vacuum Cleaners |
真空吸尘器过滤包用纸的试验方法 |
F432-04 |
Standard Specification for Roof and Rock Bolts and
Accessories |
真空吸尘器空气性能测定用强制通风室 |
F433-02 |
Standard Practice for Evaluating Thermal Conductivity of Gasket
Materials |
螺栓、岩石锚栓和附件 |
F434-93(2003)e1 |
Standard Test Method for Blow-Out Testing of Preformed
Gaskets |
衬垫材料的导热性评定 |
F436M-04 |
Standard Specification for Hardened Steel Washers [Metric] |
预制衬垫的漏气试验 |
F436-04 |
Standard Specification for Hardened Steel Washers |
淬火的钢垫圈 |
F437-06 |
Standard Specification for Threaded Chlorinated Poly(Vinyl
Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
有螺纹的氯化聚氯乙烯塑料管配件(80号表) |
F438-04 |
Standard Specification for Socket-Type Chlorinated Poly(Vinyl
Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 |
套节型氯化聚氯乙烯(CPVC)塑料管配件(40号表) |
F439-06 |
Standard Specification for Chlorinated Poly (Vinyl Chloride)
(CPVC) Plastic Pipe Fittings, Schedule 80 |
套节型氯化聚氯乙烯(CPVC)塑料管配件(80号表) |
F441/F441M-02 |
Standard Specification for Chlorinated Poly(Vinyl Chloride)
(CPVC) Plastic Pipe, Schedules 40 and 80 |
氯化聚氯乙烯(CPVC)塑料管配件(40和80号表) |
F442/F442M-99(2005) |
Standard Specification for Chlorinated Poly(Vinyl Chloride)
(CPVC) Plastic Pipe (SDR-PR) |
氯化聚氯乙烯(CPVC)塑料管(SDRPR) |
F444-88(2004)e1 |
Standard Consumer Safety Specification for Scald-Preventing
Devices and Systems in Bathing Areas |
浴池区域内防烫伤装置及系统的安全使用规范 |
F445-88(2004)e1 |
Consumer Safety Specification for Thermal-Shock-Preventing
Devices and Systems in Showering Areas |
淋浴区域内防急冷急热装置和系统的安全使用规范 |
F446-85(2004)e1 |
Standard Consumer Safety Specification for Grab Bars and
Accessories Installed in the Bathing Area |
浴池区域内手动杆和辅助装置的安全使用规范 |
F448-99(2005) |
Test Method for Measuring Steady-State Primary Photocurrent |
测量稳态初级光电流的试验方法 |
F449-02e1 |
Standard Practice for Subsurface Installation of Corrugated
Polyethylene Pipe for Agricultural Drainage or Water Table Control |
农业排水或地下水位控制用热塑塑料波纹管地下安装 |
F450-01(2005) |
Standard Test Methods for Vacuum Cleaner Hose—Durability and
Reliability (Plastic Wire Reinforced) |
真空吸尘器软管的耐热性及可靠性的试验方法(塑料纤维增强) |
F451-99ae1 |
Standard Specification for Acrylic Bone Cement |
丙烯酸骨胶结剂 |
F452-76(2002) |
Standard Specification for Preformed Cranioplasty Plates |
预制头骨形成板 |
F457-04 |
Standard Test Method for Speed and Distance Calibration of Fifth
Wheel Equipped With Either Analog or Digital Instrumentation |
装有模拟或数字仪器的测速轮上速率及距离校准的方法 |
F458-06 |
Standard Practice for Nondestructive Pull Testing of Wire
Bonds |
金属丝连接的非破坏性拉力试验 |
F459-06 |
Standard Test Methods for Measuring Pull Strength of
Microelectronic Wire Bonds |
微电子器件金属丝连接抗拉强度的测量方法 |
F462-79(1999) |
Consumer Safety Specification for Slip-Resistant Bathing
Facilities |
浴池的防滑设备安全使用规范 |
F467-06a |
Standard Specification for Nonferrous Nuts for General Use |
一般用途有色金属螺母 |
F467M-06a |
Standard Specification for Nonferrous Nuts for General Use
[Metric] |
一般用途有色金属螺母(米制的) |
F468M-06 |
Standard Specification for Nonferrous Bolts, Hex Cap Screws, and
Studs for General Use [Metric] |
一般用途有色金属螺栓、六角头螺钉及螺柱 |
F468-06 |
Standard Specification for Nonferrous Bolts, Hex Cap Screws, and
Studs for General Use |
一般用途有色金属螺栓、六角头螺钉及螺柱(米制的) |
F470-89(2003) |
Standard Practice for Caking Temperature of Dry Electrostatic
Toner |
干静电调色剂的结块温度 |
F471-76(2002) |
Standard Terminology Relating to Combination Locks |
与组合锁相关的术语 |
F472-92(1998) |
Standard Terminology for Geometry of Alpine Skis |
高山滑雪板的几何术语 |
F473-96(2003) |
Standard Specification for Binding Mounting Area Dimensions on
Alpine Skis and Bindings |
高山滑雪板的捆绑安装部位的尺寸 |
F476-84(2002) |
Standard Test Methods for Security of Swinging Door
Assemblies |
转动门组合体的安全性试验方法 |
F477-02e1 |
Standard Specification for Elastomeric Seals (Gaskets) for
Joining Plastic Pipe |
连接塑料管用弹性密封件(衬垫) |
F478-92(1999) |
Standard Specification for In-Service Care of Insulating Line
Hose and Covers |
绝缘线路软管及覆盖物的使用保养 |
F479-95(2001) |
Standard Specification for In-Service Care of Insulating
Blankets |
绝缘涂层的使用中维护 |
F480-06b |
Standard Specification for Thermoplastic Well Casing Pipe and
Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 |
按尺寸比例制造的热塑塑料套管管道及连接器(SDR).SCH40和SCH80 |
F481-97(2002) |
Standard Practice for Installation of Thermoplastic Pipe and
Corrugated Pipe in Septic Tank Leach Fields |
化肥池沥滤场用热塑塑料管和波纹软管的安装 |
F482-03 |
Standard Test Method for Corrosion of Aircraft Metals by Total
Immersion in Maintenance Chemicals |
用保养法对飞行器化学药品的完全浸没金属腐蚀试验的方法 |
F483-98(2002)e1 |
Standard Test Method for Total Immersion Corrosion Test for
Aircraft Maintenance Chemicals |
飞行器保养用化学药品的完全浸没腐蚀试验方法 |
F484-02 |
Standard Test Method for Stress Crazing of Acrylic Plastics in
Contact with Liquid or Semi-Liquid Compounds |
丙烯塑料在与液态或半液态化合物接触中产生的应力裂纹的试验方法 |
F485-02 |
Standard Test Method for Effects of Cleaners on Unpainted
Aircraft Surfaces |
去污剂对未涂漆飞机表面影响的试验方法 |
F486-01(2006) |
Standard Practice for Preparation of Use and Care Booklets for
Vacuum Cleaners |
真空吸尘器的使用和保养手册的编制 |
F487-88(2006) |
Standard Specification for Fine Aluminum-1% Silicon Wire for
Semiconductor Lead-Bonding |
纯铝-半导体引线连接用1%硅细丝 |
F493-04 |
Standard Specification for Solvent Cements for Chlorinated
Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
氯化的聚氯乙烯(CPVC)塑料管及配件用可溶解粘结剂 |
F494-05 |
Standard Test Methods for Evaluating Primary Disposable Bag
Integrity for Vacuum Cleaners |
评定真空吸尘器中初级滤清器完善性的测试方法 |
F495-99a(2004) |
Standard Test Method for Weight Loss of Gasket Materials Upon
Exposure to Elevated Temperatures |
暴露在高温下的衬垫材料重量损失试验方法 |
F496-06 |
Standard Specification for In-Service Care of Insulating Gloves
and Sleeves |
绝缘手套和套袖的使用保养 |
F497-00(2004) |
Standard Practice for Use of the Electric and Electronic
Typewriter as a Test Instrument |
作为试验工具用的电动打字机的使用 |
F498-77(1998) |
Standard Test Method for Center Spring Constant and Spring
Constant Balance of Alpine Skis |
高山滑雪板的中心弹性常数及弹性常数平衡的试验方法 |
F502-02 |
Standard Test Method for Effects of Cleaning and Chemical
Maintenance Materials on Painted Aircraft Surfaces |
清洗材料及化学保养材料对涂漆飞行器表面影响的试验方法 |
F504-05 |
Standard Test Method for Measuring the Quasi-Static Release
Moments of Alpine Ski Bindings |
成人高山滑雪板绑带的解开力矩的测量方法 |
F505-87(2006) |
Standard Practice for Comparative Evaluation of Imaging
Properties of Liquid Electrostatic Toners |
液体静电调色剂成像特性的比较评定 |
F508-77(2002) |
Standard Practice for Specifying Thick-Film Pastes |
厚膜膏规格说明 |
F509-86(2004) |
Standard Practice for Testing One-Time Carbonizing Tissue for
Pinholes |
销孔用一次性碳化纸的试验 |
F510-93(2004) |
Standard Test Method for Resistance to Abrasion of Resilient
Floor Coverings Using an Abrader with a Grit Feed Method |
用带喂磨料的磨蚀测试机测定弹性地板覆盖物的耐磨性的试验方法 |
F511-04 |
Standard Test Method for Quality of Cut (Joint Tightness) of
Resilient Floor Tile |
弹性铺地砖切口(接缝密封性)质量的测试方法 |
F512-06 |
Standard Specification for Smooth-Wall Poly(Vinyl Chloride)
(PVC) Conduit and Fittings for Underground Installation |
地下装置用平坦壁聚氯乙烯(PVC)导管及配件 |
F513-00 |
Standard Safety Specification for Eye and Face Protective
Equipment for Hockey Players |
曲棍球运动员眼睛和面部防护设施的安全规范 |
F519-05 |
Standard Test Method for Mechanical Hydrogen Embrittlement
Evaluation of Plating Processes and Service Environments |
电镀处理和飞机保养用化学药品的机械氢脆化试验方法 |
F520-97(2004) |
Standard Test Method for Environmental Resistance of Aerospace
Transparencies |
航空航天用透明物体的环境适应性试验方法 |
F521-83(2004) |
Standard Test Methods for Bond Integrity of Transparent
Laminates |
透明层压材料粘结完整性的试验方法 |
F526-97(2003) |
Standard Test Method for Measuring Dose for Use in Linear
Accelerator Pulsed Radiation Effects Tests |
测定线性加速器脉冲发射效应试验用剂量的方法 |
F528-99(2005) |
Standard Test Method of Measurement of Common-Emitter D-C
Current Gain of Junction Transistors |
结式晶体管共射极直流增益的测量方法 |
F537-01 |
Standard Specification for Design, Fabrication, and Installation
of Fences Constructed of Wood and Related Materials |
木材及有关材料制栅栏结构的设计、制造及安装 |
F538-03 |
Standard Terminology Relating to the Characteristics and
Performance of Tires |
与轮胎的特点及性能相关的术语 |
F539-01 |
Standard Practice for Fitting Athletic Footwear |
使运动鞋合适的调整 |
F541-04 |
Standard Specification for Alloy Steel Eyebolts |
合金钢有眼螺栓试验方法 |
F542-02 |
Standard Test Method for Exothermic Temperature of Encapsulating
Compounds for Electronic and Microelectronic Encapsulation |
电子元件及微电子元件封装用密封化合物发热温度的试验方法 |
F543-02 |
Standard Specification and Test Methods for Metallic Medical
Bone Screws |
皮质骨螺钉 |
F547-06 |
Standard Terminology of Nails for Use with Wood and Wood-Base
Materials |
木材和木基材料用钉的术语 |
F548-03ae1 |
Standard Test Method for Intensity of Scratches on Aerospace
Transparent Plastics |
航空航天透明塑料抗划痕强度试验方法 |
F549-85(2004) |
Standard Terminology Relating to Carbonless Copy Products |
有关无碳复制用产品名词的定义 |
F551-89(2000) |
Standard Practice for Using a 67.23-in. (1.707-m) Diameter
Laboratory Test Roadwheel in Testing Tires |
测试轮胎用标准直径[67.23英寸(1.707m)]的实验室试验车轮 |
F552-02 |
Standard Terminology Relating to Chain Link Fencing |
与链环栅栏相关的术语的定义 |
F555-01(2006) |
Standard Test Method for Motor Life Evaluation of an Upright
Vacuum Cleaner |
立式真空吸尘器的电动机寿命评定试验方法 |
F556-88(2006) |
Standard Test Method for Curl of Carbonless Copy Papers |
无碳复写纸的卷曲试验方法 |
F558-06 |
Standard Test Method for Measuring Air Performance
Characteristics of Vacuum Cleaners |
真空吸尘器的空气性能特征的测试方法 |
F559-05 |
Standard Test Method for Measuring Length of Road Test Courses
Using a Fifth Wheel |
用试验专用轮测量道路试验路线长度的方法 |
F560-05 |
Standard Specification for Unalloyed Tantalum for Surgical
Implant Applications(UNS R05200, UNS R05400) |
外科植入设备用非合金钽(UNS R05200, UNS R05400) |
F561-05a |
Standard Practice for Retrieval and Analysis of Medical Devices,
and Associated Tissues and Fluids |
金属矫形移植物的修复分析方法 |
F562-02 |
Standard Specification for Wrought
35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant
Applications (UNS R30035) |
外科植入用锻造钴镍铬钼合金(UNS R30035) |
F564-02(2006) |
Standard Specification and Test Methods for Metallic Bone
Staples |
骨科用U形钉 |
F565-04 |
Standard Practice for Care and Handling of Orthopedic Implants
and Instruments |
矫形移植物与器具的维护与管理 |
F567-00 |
Standard Practice for Installation of Chain-Link Fence |
链环栅栏的安装 |
F568M-04 |
Standard Specification for Carbon and Alloy Steel Externally
Threaded Metric Fasteners |
碳及合金钢米制外螺纹紧固件的技术规范 |
F571-87(2001) |
Standard Practice for Installation of Exit Devices in Security
Areas |
安全区出口装置的安装 |
F577-03e1 |
Standard Test Method for Particle Size Measurement of Dry
Toners |
干调色剂粒度测量的试验方法 |
F584-06e1 |
Standard Practice for Visual Inspection of Semiconductor
Lead-Bonding Wire |
半导体引线连接线的外观检查 |
F585-94(2000) |
Standard Practice for Insertion of Flexible Polyethylene Pipe
Into Existing Sewers |
聚乙烯软管同现有污水管插接 |
F588-04 |
Standard Test Methods for Measuring the Forced Entry Resistance
of Window Assemblies, Excluding Glazing Impact |
窗组件(不包括窗玻璃)对强力进入耐力的试验方法 |
F589-00 |
Standard Consumer Safety Specification for Non-Powder Guns |
非粉末喷枪的安全使用规范 |
F590-05 |
Consumer Safety Specification for Non-Powder Gun Projectiles and
Propellants |
非粉末喷枪的射弹及推进剂的安全使用规范 |
F592-84(2006) |
Standard Termninology of Collated and Cohered Fasteners and
Their Application Tools |
有关检验和连接紧固件及其操作工具的术语 |
F593-02e2 |
Standard Specification for Stainless Steel Bolts, Hex Cap
Screws, and Studs |
不锈钢螺栓,六角头螺钉及螺柱 |
F594-02 |
Standard Specification for Stainless Steel Nuts |
不锈钢螺母 |
F595-01(2005) |
Standard Test Methods for Vacuum Cleaner Hose—Durability and
Reliability (All-Plastic Hose) |
真空吸尘器软管的耐用性及可靠性试验(全塑软管) |
F596-82(2003) |
Standard Practice for Comparative Evaluation of the Imaging
Properties of Dry Electrostatic Toners |
干静电调色剂的图象特性的比较评定 |
F597-83(2003) |
Standard Practice for Evaluation of One-Time Carbon Paper in
Carbon-Interleaved Business Forms by Use of an Electric Typewriter |
用电动打字机对插入业务表格纸中的一次性复写纸的评定 |
F598-00(2004) |
Standard Practice for Determining the Resistance of Carbonless
Papers to Capsular Damage |
无碳纸耐卷筒损伤力的测定 |
F601-03 |
Standard Practice for Fluorescent Penetrant Inspection of
Metallic Surgical Implants |
金属外科植入物的荧光渗透剂检测 |
F602-98a(2003) |
Standard Criteria for Implantable Thermoset Epoxy Plastics |
可热固环氧树脂塑料的植入标准 |
F603-00 |
Standard Specification for High-Purity Dense Aluminum Oxide for
Surgical Implant Application |
外科植入用高纯度密实氧化铝 |
F605-88(2006) |
Standard Practice for Determining Compatibility of One-Time
Carbon Paper with Carbonless Copy Papers When Interleaved into the Same
Manifold Set |
当夹在同一多份打印材料中时测定一次性复写纸与无碳复印纸的兼容性 |
F606M-05 |
Standard Test Methods for Determining the Mechanical Properties
of Externally and Internally Threaded Fasteners, Washers, and Rivets
[Metric] |
测定外螺纹及内螺纹紧固件、垫圈及铆钉的机械特性的试验方法 |
F606-06 |
Standard Test Methods for Determining the Mechanical Properties
of Externally and Internally Threaded Fasteners, Washers, Direct Tension
Indicators, and Rivets |
测定外螺纹及内螺纹紧固件、垫圈及铆钉的机械特性的试验方法(米制) |
F607-03 |
Standard Test Method for Adhesion of Gasket Materials to Metal
Surfaces |
对衬垫材料金属表面粘附性试验方法 |
F608-03 |
Standard Test Method for Evaluation of Carpet Embedded Dirt
Removal Effectiveness of Household/Commercial Vacuum Cleaners |
家用真空吸尘器对地毯内藏污物去除效果的实验室试验方法 |
F609-05 |
Standard Test Method for Using a Horizontal Pull Slipmeter
(HPS) |
用平拉滑动器对鞋底、鞋后跟或有关材料的静态抗滑性的测试方法 |
F610/F610M-00a(2005) |
Standard Test Method for Evaluating the Quality of Molded
Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion
Technique |
热转换技术评定模压聚氯乙烯塑料管配件质量的测试方法 |
F615M-95(2002) |
Standard Practice for Determining Safe Current Pulse-Operating
Regions for Metallization on Semiconductor Components [Metric] |
在半导体元件上喷镀金属的安全电流脉冲操作区域的测定(米制) |
F616M-96(2003) |
Standard Test Method for Measuring MOSFET Drain Leakage Current
(Metric) |
测量MOSFET(金属氧化物半导体场效应晶体管)排漏电流的标准测试方法(米制单位) |
F619-03 |
Standard Practice for Extraction of Medical Plastics |
医学塑料制品的萃取 |
F620-06 |
Standard Specification for Alpha Plus Beta Titanium Alloy
Forgings for Surgical Implants |
外科植入用钛6铝4钒特低杂质合金锻件 |
F621-02 |
Standard Specification for Stainless Steel Forgings for Surgical
Implants |
外科植入用不锈钢锻件 |
F622-79(2002) |
Standard Specification for Preformed Cranioplasty Plates That
Can Be Altered |
预制可替换的颅成形板 |
F623-99e1 |
Standard Performance Specification for Foley Catheter |
弗利医用导管的性能规范 |
F624-98a(2003) |
Standard Guide for Evaluation of Thermoplastic Polyurethane
Solids and Solutions for Biomedical Applications |
生物学及医学用热塑性聚氨基甲酸乙酯固体及溶液的评定 |
F625-94(2006) |
Standard Practice for Classifying Water Bodies for Spill Control
Systems |
与描述水质用溢流控制系统相关的环境条件 |
F626-96a(2003) |
Standard Specification for Fence Fittings |
栅栏连接件技术规范 |
F627-99(2003) |
Standard Practice for Testing Flake of Single-Strike Film
Typewriter Ribbons |
一次性薄膜打字带的片状试验 |
F628-06 |
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS)
Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core |
有泡沫填充料的丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料雨水管、污水管和通风管道规范.表40 |
F629-02 |
Standard Practice for Radiography of Cast Metallic Surgical
Implants |
铸制金属外科植入物的照相惯例 |
F631-99 |
Standard Guide for Collecting Skimmer Performance Data in
Controlled Environments |
受控环境中分离器性能数据的收集 |
F639-98a(2003) |
Standard Specification for Polyethylene Plastics for Medical
Applications |
医疗设备用聚乙烯塑料 |
F640-79(2000) |
Standard Test Methods for Radiopacity of Plastics for Medical
Use |
医用塑料辐射不透明度的试验方法 |
F641-98a(2003) |
Standard Specification for Implantable Epoxy Electronic
Encapsulants |
可植入的环氧树脂电子胶囊密封材料 |
F645-04 |
Standard Guide for Selection, Design, and Installation of
Thermoplastic Water-Pressure Piping Systems |
热塑塑料水压管系的选择、设计及安装 |
F647-94(2000) |
Standard Practice for Evaluating and Specifying Implantable
Shunt Assemblies for Neurosurgical Application |
神经外科用可植入分路组件的评定和确定 |
F648-04 |
Standard Specification for Ultra-High-Molecular-Weight
Polyethylene Powder and Fabricated Form for Surgical Implants |
外科植入用超高分子量聚乙烯粉末及成形件技术规范 |
F649-01 |
Standard Practice for Secondary Calibration of Airborne Particle
Counter Using Comparison Procedures |
用比较程序进行空中游离微粒计数器的二次校正 |
F654-03 |
Standard Specification for Residential Chain Link Fence Gates |
住宅用链环栏栅门 |
F655-06 |
Standard Specification for Test Carpets and Pads for Vacuum
Cleaner Testing |
真空吸尘器试验用试验地毯和缓冲垫 |
F656-02 |
Standard Specification for Primers for Use in Solvent Cement
Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings |
聚氯乙烯塑料管和配件的溶剂胶结接口用打底剂 |
F658-00a(2006) |
Standard Practice for Calibration of a Liquid-Borne Particle
Counter Using an Optical System Based Upon Light Extinction |
用近似单分散球形颗粒材料进行液体游离粒子计数器的限定尺寸校准、分辨率和计算准确度 |
F659-06 |
Standard Specification for Skier Goggles and Faceshields |
抗高冲击眼睛防护装置 |
F660-83(2002)e1 |
Standard Practice for Comparing Particle Size in the Use of
Alternative Types of Particle Counters |
替换型粒子计数器使用过程中粒度比较 |
F665-98(2003) |
Standard Classification for Vinyl Chloride Plastics Used in
Biomedical Application |
生物医学用氯乙烯塑料分类 |
F667-06 |
Standard Specification for Large Diameter Corrugated
Polyethylene Pipe and Fittings |
大直径波纹聚乙烯管及配件 |
F668-06 |
Standard Specification for Polyvinyl Chloride (PVC) and Other
Organic Polymer-Coated Steel Chain-Link Fence Fabric |
聚氯乙烯涂层钢链环栏栅织物 |
F670-02 |
Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L)
Lube Oil Dispensing |
5和10加仑(20和40升)的润滑油配料容器 |
F676-97(2003) |
Standard Test Method for Measuring Unsaturated TTL Sink
Current |
测量不饱和的晶体管逻辑电路吸收电流的方法 |
F677-04 |
Standard Test Method for Fluid and Grease Resistance of
Thermoset Encapsulating Compounds Used in Electronic and Microelectronic
Applications |
电子和微电子学应用的热固密封胶的耐流体和滑脂性能标准试验方法 |
F679-06 |
Standard Specification for Poly(Vinyl Chloride) (PVC)
Large-Diameter Plastic Gravity Sewer Pipe and Fittings |
大口径聚氯乙烯塑料污水管及配件 |
F680-80(2002) |
Standard Test Methods for Nails |
钉子的试验方法 |
F681-82(2004) |
Standard Practice for Use of Branch Connections |
支路连接的应用 |
F682-82a(2004) |
Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe
Couplings |
锻制碳素钢套管接头 |
F683-03a |
Standard Practice for Selection and Application of Thermal
Insulation for Piping and Machinery |
管道系统和机械设备绝热的选择和应用 |
F685-96(2006) |
Standard Practice for Determining Toner Usage, Efficiency, and
Dusting Nonheat Fixing Copiers Using Single-Component Toner Systems |
测定在使用单一成分调色剂系统的非加热固定复印机中调色剂的使用率、效率及撒粉度 |
F686-94(2006) |
Standard Practice for Evaluation of Image Quality Produced by
Carbonless Copy Paper with an Electric or Electronic Typewriter |
用电动打字机打字时无碳复写纸产生的印迹质量的评定 |
F688-05 |
Standard Specification for Wrought
Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for
Surgical Implants (UNS R30035) |
外科移植用锻制钴镍铬钼合金中厚板,薄板及箔 |
F689-97(2004) |
Standard Practice for Determination of the Temperature of
Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings |
有金属套管的地上塑料气体压力管的温度测定 |
F690-86(2003)e2 |
Standard Practice for Underground Installation of Thermoplastic
Pressure Piping Irrigation Systems |
热塑压力管道灌溉系统的地下装置 |
F692-97(2002) |
Standard Test Method for Measuring Adhesion Strength of
Solderable Films to Substrates |
测量可焊膜与基片的粘结强度的方法 |
F693-01 |
Standard Practice for Sealing Seams of Resilient Sheet Flooring
Products by Use of Liquid Seam Sealers |
使用液体封缝剂时弹性铺地薄板的密封接缝 |
F694-02e1 |
Standard Test Method for Heel-Attaching Strength of Women's
Shoes |
女鞋后跟附着强度的试验方法 |
F695-01 |
Standard Practice for Ranking of Test Data Obtained for
Measurement of Slip Resistance of Footwear Sole, Heel, and Related
Materials |
使用平拉滑动器或詹姆斯机测量鞋底、鞋后跟或有关材料的静态抗滑性所得试验数据的评定 |
F696-02 |
Standard Specification for Leather Protectors for Rubber
Insulating Gloves and Mittens |
橡胶绝缘手套的皮革保护层 |
F697-00 |
Standard Practice for Care and Use of Athletic Mouth
Protectors |
口腔保护器的使用和维护 |
F698-94(2000) |
Standard Specification for Physical Information to be Provided
for Amusement Rides and Devices |
为娱乐乘骑设施和装置提供的物理信息 |
F700-93(2002) |
Standard Practice for Care and Handling of Intracranial Aneurysm
Clips and Instruments |
颅内动脉卡箍及仪器的保养及管理 |
F701-81(2002) |
Standard Practice for Care and Handling of Neurosurgical
Implants and Instruments |
神经外科用植入物及仪器的保养及管理 |
F702-98a(2003) |
Standard Specification for Polysulfone Resin for Medical
Applications |
医用聚砜树脂 |
F703-96(2002)e1 |
Standard Specification for Implantable Breast Prostheses |
可植入假乳房 |
F704-81(2001) |
Standard Practice for Selecting Bolting Lengths for Piping
System Flanged Joints |
管道系统法兰接头用螺栓长度的选择 |
F706-96(2006) |
Standard Practice for Determination of Fusion Temperature of Dry
Electrostatic Heat-Fixing Toners |
干静电热定影的调色剂熔化温度的测定 |
F707/F707M-94(2006) |
Standard Specification for Modular Gage Boards |
组合式量规板 |
F708-92(2004) |
Standard Practice for Design and Installation of Rigid Pipe
Hangers |
硬质管道支架的设计与安装 |
F710-05 |
Standard Practice for Preparing Concrete Floors to Receive
Resilient Flooring |
混凝土楼板和其他整块楼板在铺设弹性铺面前的准备 |
F711-02 |
Standard Specification for Fiberglass-Reinforced Plastic (FRP)
Rod and Tube Used in Live Line Tools |
火线工具用玻璃纤维增强塑料棒和管 |
F712-88(2000) |
Standard Test Methods for Electrically Insulating Plastic Guard
Equipment for Protection of Workers |
工人防护用电绝缘塑料防护设备的试验方法 |
F714-05 |
Standard Specification for Polyethylene (PE) Plastic Pipe
(SDR-PR) Based on Outside Diameter |
依据外径的聚乙烯(PE)塑料管(SDR-PR) |
F715-95(2002) |
Standard Test Methods for Coated Fabrics Used for Oil Spill
Control and Storage |
漏洒油控制用隔膜料试验 |
F716-82(2001) |
Standard Methods of Testing Sorbent Performance of Absorbents |
吸收剂的吸收性能试验 |
F717-89(2000) |
Standard Specification for Football Helmets |
橄榄球运动员的头盔 |
F718-99(2005)e1 |
Standard for Shipbuilders and Marine Paints and Coatings
Product/Procedure Data Sheet |
造船厂和船用油漆及涂料制品/工艺数据图表 |
F719-81(2002)e1 |
Standard Practice for Testing Biomaterials in Rabbits for
Primary Skin Irritation |
用兔作生物材料试验对皮肤的刺激 |
F720-81(2002)e1 |
Standard Practice for Testing Guinea Pigs for Contact Allergens
Guinea Pig Maximization Test |
接触变态反应用荷兰猪试验:荷兰猪的育肥 |
F721-81(2004) |
Standard Specification for Gage Piping Assemblies |
标准管道组装件 |
F722-82(2004) |
Standard Specification for Welded Joints for Shipboard Piping
Systems |
船上管道系统用焊接接头 |
F724-94a(2004) |
Standard Test Method for Outdoor Evaluation of Tire Sidewall
Component Cracking Resistance |
疲劳轮胎侧壁组件抗断裂性能的室外评定 |
F725-03e1 |
Standard Practice for Drafting Impact Test Requirements In
Thermoplastic Pipe And Fittings Standards |
在热塑塑料管及配件标准中冲击试验要求的制定 |
F726-06 |
Standard Test Method for Sorbent Performance of Adsorbents |
吸附剂的吸附性能试验 |
F732-00(2006) |
Standard Test Method for Wear Testing of Polymeric Materials
Used in Total Joint Prostheses |
针在全连接假肢使用的聚合材料用平面上往复刻划以评定其抗磨和磨耗特性 |
F733-90(2003) |
Standard Practice for Optical Distortion and Deviation of
Transparent Parts Using the Double-Exposure Method |
用双曝光法测定透明部件的光学畸变和偏差 |
F734-95(2001) |
Standard Test Method for Shear Strength of Fusion Bonded
Polycarbonate Aerospace Glazing Material |
航空航天用熔化胶结聚碳酸酯透明材料的剪切强度 |
F735-94(2001) |
Standard Test Method for Abrasion Resistance of Transparent
Plastics and Coatings Using the Oscillating Sand Method |
用摆动沙袋法测定透明塑料及涂层抗磨损性的测试方法 |
F736-95(2001) |
Standard Test Method for Impact Resistance of Monolithic
Polycarbonate Sheet by Means of a Falling Weight |
用落锤冲击法测定整块聚碳酸酯薄板抗冲击性的试验方法 |
F738M-02 |
Standard Specification for Stainless Steel Metric Bolts, Screws,
and Studs |
不锈钢米制螺栓、螺钉及螺柱(米制) |
F739-99a |
Standard Test Method for Resistance of Protective Clothing
Materials to Permeation by Liquids or Gases Under Conditions of Continuous
Contact |
连续接触条件下防护服装材料防有害液体或气体渗透性的试验方法 |
F744M-97(2003) |
Standard Test Method for Measuring Dose Rate Threshold for Upset
of Digital Integrated Circuits [Metric] |
数字集成电路剂量测定阈值的标准试验方法 |
F745-00 |
Standard Specification for 18 Chromium-12.5 Nickel-2.5
Molybdenum Stainless Steel for Cast and Solution-Annealed Surgical Implant
Applications |
铸造和固溶退火外科植入物用不锈钢 |
F746-04 |
Standard Test Method for Pitting or Crevice Corrosion of
Metallic Surgical Implant Materials |
金属外科植入材料的凹痕或裂隙腐蚀的试验方法 |
F747-06 |
Standard Terminology Relating to Amusement Rides and Devices |
有关娱乐设备和装置的术语定义 |
F748-04 |
Standard Practice for Selecting Generic Biological Test Methods
for Materials and Devices |
材料和装置用一般生物试验方法的选择 |
F749-98(2002)e2 |
Standard Practice for Evaluating Material Extracts by
Intracutaneous Injection in the Rabbit |
用给兔子皮内注射评定药物材料浸渍物 |
F750-87(2002)e1 |
Standard Practice for Evaluating Material Extracts by Systemic
Injection in the Mouse |
用给老鼠有系统注射评定药物材料浸渍物 |
F754-00 |
Standard Specification for Implantable Polytetrafluoroethylene
(PTFE) Polymer Fabricated in Sheet, Tube, and Rod Shapes |
用可植入的聚四氟乙烯聚合物制造的薄板、管及棒材 |
F755-99(2005) |
Standard Specification for Selection of Porous Polyethylene for
Use in Surgical Implants |
外科植入物用多孔聚乙烯的选择 |
F756-00 |
Standard Practice for Assessment of Hemolytic Properties of
Materials |
材料的溶血特性的评定 |
F758-95(2000) |
Standard Specification for Smooth-Wall Poly(Vinyl Chloride)
(PVC) Plastic Underdrain Systems for Highway, Airport, and Similar
Drainage |
高速路,飞机场及类似区域排水用光壁聚氯乙烯(PVC)塑料地下排水系统 |
F760-93(2006) |
Standard Specification for Food Service Equipment Manuals |
食品服务设备手册 |
F762-94(2000)e1 |
Standard Test Method for Determining Change in Groove (or Void)
Depth With Distance Traveled for Passenger Car Tires |
测量客车随行驶距离引起的轮胎槽(沟纹)深度变化的测试方法 |
F763-04 |
Standard Practice for Short-Term Screening of Implant
Materials |
植入材料的短期屏蔽 |
F765-93(2006) |
Standard Specification for Wildcats, Ship Anchor Chain |
船用锚链及锚链轮 |
F766-82(2005) |
Standard Test Method for Melting Point of Waxes |
蜡的熔点试验方法 |
F767-98(2002) |
Standard Test Method for Image Stability of Chemical Carbonless
Paper to Light |
化学无碳纸曝光后图象稳定性的试验方法 |
F770-06 |
Standard Practice for Ownership and Operation of Amusement Rides
and Devices |
娱乐骑乘设施和装置操作程序 |
F771-99(2005) |
Standard Specification for Polyethylene (PE) Thermoplastic
High-Pressure Irrigation Pipeline Systems |
聚乙烯热塑塑料高压灌溉管道系统 |
F773M-96(2003) |
Practice for Measuring Dose Rate Response of Linear Integrated
Circuits [Metric] |
测量线性集成电路的反应率剂量的标准惯例 |
F778-88(2001) |
Standard Methods for Gas Flow Resistance Testing of Filtration
Media |
过滤介质耐气体流动试验 |
F779-93(1998) |
Standard Test Method for Torsion Characteristic of Alpine
Skis |
高山滑雪板的扭转特性的测试方法 |
F780-93a(1998) |
Standard Test Method for Linear Deformation and Breaking
Strength of Alpine Skis |
高山滑雪板的直线变形和抗断裂强度的测试方法 |
F782-01 |
Standard Specification for Doors, Furniture, Marine |
船用家具的门 |
F783-88(2003) |
Standard Specification for Staple, Handgrab, Handle, and Stirrup
Rung |
U型环、扶手杆、手柄及蹬形梯级 |
F788/F788M-06 |
Standard Specification for Surface Discontinuities of Bolts,
Screws, and Studs, Inch and Metric Series |
英制及米制系列的螺栓、螺钉及螺柱的表面不均匀性 |
F790-02 |
Standard Guide for Testing Materials for Aerospace Plastic
Transparent Enclosures |
航空航天塑料透明外壳用试验材料 |
F791-96(2002) |
Standard Test Method for Stress Crazing of Transparent
Plastics |
透明塑料的应力裂纹 |
F792-01e2 |
Standard Practice for Evaluating the Imaging Performance of
Security X-Ray Systems |
控制接近区禁止项目探测用的电离辐射设备的设计和使用 |
F793-06 |
Standard Classification of Wall Covering by Use
Characteristics |
墙面饰层按耐久性的分类 |
F794-03 |
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile
Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter |
依据控制内径的聚氯乙烯(PVC)异型重力下水道管及配件 |
F798-97(2002) |
Standard Practice for Determining Gettering Rate, Sorption
Capacity, and Gas Content of Nonevaporable Getters in the Molecular Flow
Region |
测量分子流动区域内不挥发吸收剂的吸收速率、吸收能量及气体含量 |
F799-02 |
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy
Forgings for Surgical Implants (UNS R31537, R31538, R31539) |
外科移植用热机加工钴铬钼合金(UNS R31537, R31538, R31539) |
F801-96(2002) |
Standard Test Method for Measuring Optical Angular Deviation of
Transparent Parts |
透明部件光学角度偏差的测量方法 |
F802-83(2003) |
Standard Guide for Selection of Certain Walkway Surfaces When
Considering Footwear Traction |
根据鞋靴磨擦力选定某种人行道的表面 |
F803-03 |
Standard Specification for Eye Protectors For Selected Sports |
网球运动员用护目器 |
F806-99a(2003)e1 |
Standard Test Method for Compressibility and Recovery of
Laminated Composite Gasket Materials |
叠层复合衬垫材料的可压缩性和复原性测试方法 |
F807-83(2003) |
Standard Practice for Determining Resolution Capability of
Office Copiers |
办公用复印机的复印分辨率的测定 |
F810-01 |
Standard Specification for Smoothwall Polyethylene (PE) Pipe for
Use in Drainage and Waste Disposal Absorption Fields |
排水和污水处理吸收场用光壁聚乙烯(PE)管 |
F811-02 |
Standard Practice for Accelerometer Use in Vehicles for Tire
Testing |
运载工具的轮胎试验用加速度计 |
F812/F812M-03 |
Standard Specification for Surface Discontinuities of Nuts, Inch
and Metric Series |
英制和米制系列螺母的表面不均匀性 |
F813-01 |
Standard Practice for Direct Contact Cell Culture Evaluation of
Materials for Medical Devices |
医疗器械用材料直接接触细胞培养评定 |
F816-83(2003) |
Standard Test Method for Combined Fine and Gross Leaks for Large
Hybrid Microcircuit Packages |
大型混合微电路插件的综合微泄漏和总泄漏的试验方法 |
F818-93(2003) |
Standard Terminology Relating to Spill Response Barriers |
与漏洒油治理用阻挡层相关的术语 |
F819-05 |
Standard Terminology Relating to Electrical Protective Equipment
for Workers |
工人用电气防护设备术语的定义 |
F820-06 |
Test Method for Measuring Air Performance Characteristics of
Central Vacuum Cleaning Systems |
住宅中央真空吸尘系统的空气性能特征的测试方法 |
F821/F821M-01 |
Standard Specification for Domestic Use Doors and Frames, Steel,
Interior, Marine |
船舶内部钢门及门框 |
F822-93(2004) |
Standard Specification for Chest of Drawers (Chiffonier), Steel,
Marine |
船用钢橱柜(碗碟柜) |
F823-93(2004) |
Standard Specification for Desk, Log, Marine, Steel, with
Cabinet |
船用木制有钢柜的办公桌 |
F824-93(2004) |
Standard Specification for Tables, Mess, Marine, Steel |
船用钢制餐桌 |
F825-93(2004) |
Standard Specification for Drawers, Furniture, Marine, Steel |
测定直接示热纸的静态热敏度的方法 |
F826-94(2004) |
Standard Specification for Tops, Furniture, Marine, Steel |
钢制船用家具顶盖 |
F832-90(2001) |
Standard Classification for Security Seals |
安全密封件的分类 |
F833-05a |
Standard Consumer Safety Performance Specification for Carriages
and Strollers |
客车及婴儿四轮车的使用者安全性能规范 |
F834-84(1999) |
Consumer Safety Specification for Toy Chests |
玩具储蓄盒的安全使用规范 |
F835-04 |
Standard Specification for Alloy Steel Socket Button and Flat
Countersunk Head Cap Screws |
合金钢管座凸头及扁平沉头六角螺钉 |
F835M-04 |
Standard Specification for Alloy Steel Socket Button and Flat
Countersunk Head Cap Screws [Metric] |
合金钢管座凹头及扁平沉头六角螺钉(米制) |
F836M-02 |
Standard Specification for Style 1 Stainless Steel Metric
Nuts |
1型不锈钢(米制)螺母技术规范 |
F837M-02a |
Standard Specification for Stainless Steel Socket Head Cap
Screws [Metric] |
不锈钢凹头螺钉 |
F837-02ae1 |
Standard Specification for Stainless Steel Socket Head Cap
Screws |
不锈钢凹头螺钉(米制) |
F838-05 |
Standard Test Method for Determining Bacterial Retention of
Membrane Filters Utilized for Liquid Filtration |
用液体过滤法测定薄膜过滤器的细菌保持力标准试验方法 |
F839-83(2006) |
Standard Specification for Cautionary Labeling of Portable
Gasoline Containers for Consumer Use |
用户使用的便携式汽油容器的警告标莶 |
F840-83(2003) |
Standard Specification for Ladders, Fixed, Vertical, Steel,
Ship's |
船用垂直固定式钢舷梯 |
F841-84(2006) |
Standard Specification for Thrusters, Tunnel, Permanently
Installed in Marine Vessels |
永久性安装在船舱中的隧道顶推装置 |
F842-04 |
Standard Test Methods for Measuring the Forced Entry Resistance
of Sliding Door Assemblies, Excluding Glazing Impact |
测量水平滑动门组件的抗强制进入能力的试验方法 |
F843-98(2003) |
Standard Test Method for Assessing the Color Strength and
Dispersibility of Alkali Blue Pigment in Hot Melt Carbon Copy Paper Ink |
评定热熔复写纸油墨中碱性蓝颜料的颜色牢度和分散度的试验方法 |
F844-04 |
Standard Specification for Washers, Steel, Plain (Flat),
Unhardened for General Use |
一般用途未淬火的扁平钢垫圈 |
F846-92(2003) |
Standard Guide for Testing Performance of Amusement Rides and
Devices |
娱乐乘骑和装置的性能试验 |
F851-87(2005) |
Standard Test Method for Self-Rising Seat Mechanisms |
自动升高座椅装置的试验方法 |
F852-99(2006) |
Standard Specification for Portable Gasoline Containers for
Consumer Use |
用户使用的便携式汽油容器 |
F853-05 |
Standard Practice for Maintenance Procedures for Amusement Rides
and Devices |
娱乐乘骑及装置的维修程序 |
F854-83(2003) |
Standard Test Method for Cleanliness of Carbon Paper |
复写纸的清洁度试验方法 |
F855-04 |
Standard Specifications for Temporary Protective Grounds to Be
Used on De-energized Electric Power Lines and Equipment |
切断电力线及设备用的临时接地装置 |
F856-97(2004) |
Standard Practice for Mechanical Symbols, Shipboard—Heating,
Ventilation, and Air Conditioning (HVAC) |
加热、通风及空调符号 |
F857-02 |
Standard Specification for Hot Water Sanitizing Commercial
Dishwashing Machines, Stationary Rack Type |
固定轨道型热消毒商用洗碗机 |
F858-02 |
Standard Specification for Hot Water Sanitizing Commercial
Dishwashing Machines, Single Tank, Conveyor Rack Type |
传递轨道型单槽热消毒商用洗碗机 |
F859-04 |
Standard Specification for Heat-Sanitizing Commercial
Dishwashing Machines, Multiple Tank, Conveyor Rack Type |
传递轨道型多槽热消毒商用洗碟机 |
F860-02 |
Standard Specification for Hot Water Sanitizing Commercial
Dishwashing Machines, Multiple Tank, Rackless Conveyor Type |
无轨道传送型多槽热消毒商用洗碗机 |
F861-94(2003) |
Standard Specification for Commercial Dishwashing Racks |
商用洗碟机轨道 |
F862-93(2002) |
Standard Test Method for pH and Chloride-ion Concentration of
Aerospace Hydraulic Fluids |
航空航天液压流体的氯离子浓度及pH值的试验方法 |
F868-02 |
Standard Classification for Laminated Composite Gasket
Materials |
层压复合衬垫材料的分类 |
F869-01 |
Standard Terminology Relating to Athletic Shoes and
Biomechanics |
与运动员鞋及生物力学相关的术语定义 |
F870-94(2005) |
Standard Practice for Tread Footprints of Passenger Car Tires
Groove Area Fraction and Dimensional Measurements |
客车轮胎沟槽部分的胎面印迹和尺寸测量 |
F873-84(2003) |
Standard Guide for Incinerating Oil Spill Wastes at Temporary
Field Locations |
在临时油田现场焚烧漏洒废油的规则 |
F874-98(2003) |
Standard Test Method for Temperature Measurement and Profiling
for Microwave Susceptors |
微波感受器温度测量及外形图绘制的方法 |
F875-94(2003)e1 |
Standard Test Method for Evaluation of Large Area Density and
Background on Office Copiers |
办公室复印机大范围浓度和底色评定用测试方法 |
F876-05 |
Standard Specification for Crosslinked Polyethylene (PEX)
Tubing |
交联聚乙烯(PEX)管 |
F877-05 |
Standard Specification for Crosslinked Polyethylene (PEX)
Plastic Hot- and Cold-Water Distribution Systems |
交联聚乙烯(PEX)塑料热水和冷水配给系统技术规范 |
F879-02a |
Standard Specification for Stainless Steel Socket Button and
Flat Countersunk Head Cap Screws |
不锈钢管座凸头及扁平沉头六角螺钉 |
F879M-02a |
Standard Specification for Stainless Steel Socket Button and
Flat Countersunk Head Cap Screws [Metric] |
不锈钢管座凸头及扁平沉头六角螺钉(米制) |
F880-02 |
Standard Specification for Stainless Steel Socket-Set Screws |
不锈钢凹头定位螺钉 |
F880M-02 |
Standard Specification for Stainless Steel Socket Set Screws
[Metric] |
不锈钢凹头定位螺钉(米制) |
F881-94(2000) |
Standard Specification for Silicone Elastomer Facial Implants |
硅树脂胶和硅树脂固体(非多孔)面部植入物 |
F882-84(2002) |
Standard Performance and Safety Specification for Cryosurgical
Medical Instruments |
低温外科医疗器械的性能和安全 |
F883-04 |
Standard Performance Specification for Padlocks |
挂锁的性能规范 |
F884-01(2006) |
Standard Test Method for Motor Life Evaluation of a Built-In
(Central Vacuum) Vacuum Cleaner |
安装在内部的(集中式)真空吸尘器的电动机寿命的评定方法 |
F885-84(2006) |
Standard Specification for Envelope Dimensions for Bronze Globe
Valves NPS ? to 2 |
美国标准直管螺纹1/4至2英寸青铜球型阀的阀壳尺寸 |
F887-05e1 |
Standard Specifications for Personal Climbing Equipment |
个人用攀登设备 |
F888-06 |
Standard Test Method for Measuring Maximum Function Volume of
the Primary Dirt Receptacle in a Vacuum Cleaner |
测量真空吸尘器的原灰尘收集器的最大功能容积的测试方法 |
F891-04 |
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC)
Plastic Pipe With a Cellular Core |
有多孔芯的共挤聚氯乙烯塑料管技术规范 |
F893-05a |
Standard Guide for Inspection of Amusement Rides and Devices |
娱乐乘骑及装置的检验 |
F894-06 |
Standard Specification for Polyethylene (PE) Large Diameter
Profile Wall Sewer and Drain Pipe |
聚乙烯(PE)大口径异形内壁污水和排水管道 |
F895-84(2006) |
Standard Test Method for Agar Diffusion Cell Culture Screening
for Cytotoxicity |
琼脂扩散细胞培养屏蔽细胞毒素的试验方法 |
F897-02 |
Standard Test Method for Measuring Fretting Corrosion of
Osteosynthesis Plates and Screws |
测量接骨用板和钉磨蚀的试验方法 |
F899-02 |
Standard Specification for Stainless Steel for Surgical
Instruments |
外科器械用的不锈钢锭,棒材和丝材 |
F900-05 |
Standard Specification for Industrial and Commercial Swing
Gates |
工业和商业用旋转门 |
F901-01 |
Standard Specification for Aluminum Transmission Tower Bolts and
Nuts |
铝制传输塔用螺栓及螺母 |
F903-03(2004) |
Standard Test Method for Resistance of Materials Used in
Protective Clothing to Penetration by Liquids |
防护服材料耐液体渗透性的试验方法 |
F904-98(2003) |
Standard Test Method for Comparison of Bond Strength or Ply
Adhesion of Similar Laminates Made from Flexible Materials |
挠性材料制类似层压制品的粘结强度或层间粘结度比较的试验方法 |
F905-04 |
Standard Practice for Qualification of Polyethylene Saddle-Fused
Joints |
聚乙烯鞍形溶解连接的合格证明 |
F906-85(2003) |
Standard Specification for Letters and Numerals for Ships |
船用字母及数码 |
F909-94a(2006) |
Standard Terminology Relating to Printers |
与打印机相关的术语 |
F910-04 |
Standard Specification for Face Guards for Youth Baseball |
少年棒球运动员用面部保护罩 |
F912-04 |
Standard Specification for Alloy Steel Socket Set Screws |
合金钢凹头定位螺钉 |
F912M-04 |
Standard Specification for Alloy Steel Socket Set Screws
[Metric] |
合金钢凹头定位螺钉(米制) |
F913-02 |
Standard Specification for Thermoplastic Elastomeric Seals
(Gaskets) for Joining Plastic Pipe |
连接塑料管用热塑弹性密封件(垫圈) |
F914-03 |
Standard Test Method for Acoustic Emission for Insulated and
Non-Insulated Aerial Personnel Devices Without Supplemental Load Handling
Attachments |
航空人员隔音装置用声发射的试验方法 |
F917-91(2003) |
Standard Specification for Commercial Food Waste Disposers |
商业食品废弃物处置器 |
F918-02 |
Standard Specification for Noncarbonated Mechanically
Refrigerated, Beverage Dispenser (Visible Product) |
不掺碳酸气的机械冷藏饮料自动售货机(可见产品) |
F919-05 |
Standard Specification for Slicing Machines, Food, Electric |
电动食品切片机标准规范 |
F920-93(1999) |
Standard Specification for Minimum Performance and Safety
Requirements for Resuscitators Intended for Use With Humans |
人用复苏器的最低性能和安全要求 |
F921-85(2002) |
Standard Terminology Relating to Hemostatic Forceps |
有关止血钳的名词术语 |
F922-01(2006) |
Standard Test Method for Motor Life Evaluation of an Electric
Motorized Nozzle |
家用电动喷头的电动机寿命评估的测试方法 |
F924-90(2004) |
Standard Test Method for Resistance to Puncture of Cushioned
Resilient Floor Coverings |
减震弹性地板覆盖物的耐刺穿试验方法 |
F925-02 |
Standard Test Method for Resistance to Chemicals of Resilient
Flooring |
弹性地板材料耐化学药品的试验方法 |
F926-02 |
Standard Specification for Cautionary Labeling of Portable
Kerosine and Diesel Containers for Consumer Use |
用户用便携式煤油容器的警告标莶 |
F934-96(2003) |
Standard Specification for Standard Colors for Polymer-Coated
Chain Link Fence Materials |
聚合物包覆的链环连接栅栏材料的颜色 |
F935-00(2004) |
Standard Test Method for Comparing Cover-Up Correction Media |
比较掩盖型修改剂的试验方法 |
F939-06 |
Standard Practice for Selection of Release Torque Values for
Alpine Ski Bindings |
高山滑雪绑带的松开扭矩值的选择 |
F940-99(2005) |
Standard Practice for Quality Control Receipt Inspection
Procedures for Protective Coatings (Paint), Used in Marine Construction
and Shipbuilding |
海上建筑物及造船用保护性涂料的质量控制验收检验程序 |
F941-99(2005) |
Standard Practice for Inspection of Marine Surface Preparation
and Coating Application |
船体表面准备和涂料涂敷的检验 |
F942-02 |
Standard Guide for Selection of Test Methods for Interlayer
Materials for Aerospace Transparent Enclosures |
航空航天透明外壳用的夹层材料试验方法的选择 |
F945-06 |
Standard Test Method for Stress-Corrosion of Titanium Alloys by
Aircraft Engine Cleaning Materials |
航空发动机清洗材料对钛合金的应力腐蚀试验方法 |
F946-85(2004) |
Standard Guide for Establishing Security Seal Control and
Accountability Procedures |
制定安全封口控制和责任程序 |
F948-94(2006) |
Standard Test Method for Time-to-Failure of Plastic Piping
Systems and Components Under Constant Internal Pressure With Flow |
在恒定内流动压力下塑料管道系统和组件损坏时间的测试方法 |
F949-06a |
Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated
Sewer Pipe With a Smooth Interior and Fittings |
光滑内壁聚氯乙烯(PVC)波纹污水管和配件 |
F952-03 |
Standard Specification for Mixing Machines, Food, Electric |
电动食品搅拌机 |
F953-94(2003) |
Standard Specification for Commercial Dishwashing Machines
(Stationary Rack, Dump Type) Chemical Sanitizing |
商业洗碗机(带有固定架倾斜型)的化学消毒处理 |
F955-03 |
Standard Test Method for Evaluating Heat Transfer through
Materials for Protective Clothing Upon Contact with Molten Substances |
评定通过接触熔融物质的防护服装材料的传热性的试验方法 |
F956-91(2001) |
Standard Specification for Bell, Cast, Sound Signalling |
铸制声音信号铃 |
F957-91(2001) |
Standard Specification for Gong, Sound Signaling |
声音信号钟 |
F959M-04 |
Standard Specification for Compressible-Washer-Type Direct
Tension Indicators for Use With Structural Fasteners [Metric] |
结构紧固件用可压缩垫圈型直接张力指示器 |
F959-06 |
Standard Specification for Compressible-Washer-Type Direct
Tension Indicators for Use with Structural Fasteners |
用于结构紧固件的可压缩垫圈型张力直接指示器标准规范(米制) |
F961-03 |
Standard Specification for Cobalt-35 Nickel-20 Chromium-10
Molybdenum Alloy Forgings for Surgical Implants [UNS R30035] |
外科植入用钴镍铬钼合金锻件 |
F962-04 |
Standard Specification for Oil Spill Response Boom Connection:
Z-Connector |
油溢流反应浮杆连接 |
F963-03 |
Standard Consumer Safety Specification for Toy Safety |
玩具安全的用户安全规范 |
F964-02 |
Standard Specification for Rigid Poly (Vinyl Chloride) (PVC)
Exterior Profiles Used for Fencing |
护栏用硬质聚氯乙烯外型的标准规范 |
F965-99 |
Standard Specification for Rigid Laryngoscopes for Tracheal
Intubation-Hook-On Fittings for Laryngoscope Handles and Blades with
Lamps |
气管插管的刚性喉镜的规格-喉镜手柄的钩形配件和带灯的刀片 |
F966-00 |
Consumer Safety Specification for Full-Size and Non-Full-Size
Baby Crib Corner Post Extensions |
全尺寸和非全尺寸的婴儿床角柱延伸件的用户安全使用规范 |
F967-03 |
Standard Practice for Security Engineering Symbols |
工程安全符号 |
F968-93(2002)e1 |
Standard Specification for Electrically Insulating Plastic Guard
Equipment for Protection of Workers |
工人保护用电绝缘塑料保护设备 |
F969-01 |
Standard Practice for Construction of Chain-Link Tennis Court
Fence |
网球场用链环栏栅的制造 |
F970-00 |
Standard Test Method for Static Load Limit |
静荷载极限试验方法 |
F974-06 |
Standard Practice for Determination of Color Response of
Electrostatic Copying System, Black and White Output |
黑白静电复印机的上色度的测试方法 |
F976-02 |
Specification for Portable Kerosine and Diesel Containers for
Consumer Use |
用户使用的便携式煤油容器 |
F977-03 |
Standard Consumer Safety Specification for Infant Walkers |
婴儿学步车的安全使用性能规范 |
F979-86(2003) |
Standard Test Method for Hermeticity of Hybrid Microcircuit
Packages Prior to Lidding |
混合微电路组件在封装前的密封性的试验方法 |
F980M-96(2003) |
Standard Guide for Measurement of Rapid Annealing of
Neutron-Induced Displacement Damage in Silicon Semiconductor Devices
[Metric] |
测量硅半导体器件中中子感应位移故障的快速退火用标准指南(米制单位) |
F981-04 |
Standard Practice for Assessment of Compatibility of
Biomaterials for Surgical Implants with Respect to Effect of Materials on
Muscle and Bone |
外科植入用生物材料与肌肉及骨骼材料效应相容性的评定 |
F982-86(2002) |
Standard Specification for Disclosure of Characteristics of
Surgically Implanted Clamps for Carotid Occlusion |
静动脉连接用外科植入夹的特性表示 |
F983-86(2005) |
Standard Practice for Permanent Marking of Orthopaedic Implant
Components |
整形植入件耐用标志 |
F985-00(2006) |
Standard Specification for Panama Canal Pilot Platform |
巴拿马运河领航台 |
F986-86(2004) |
Standard Specification for Suction Strainer Boxes |
吸滤器外壳 |
F987-04 |
Standard Specification for Portable Intermediate Flush Deck
Stanchion |
轻便平甲板立杆 |
F991M-04 |
Standard Specification for Docking/Drain Plug and Boss
Assemblies [Metric] |
船坞/泄水孔塞和轴节配件的标准规范(米制) |
F992-86(2006) |
Standard Specification for Valve Label Plates |
阀门标识牌 |
F993-86(2006) |
Standard Specification for Valve Locking Devices |
阀门锁紧装置 |
F994-86(2006) |
Standard Specification for Design and Installation of Overboard
Discharge Hull Penetration Connections |
向船外排水船身渗透连接件的设计与安装 |
F995-97(2006) |
Standard Practice for Estimating Toner Usage in Copiers
Utilizing Dry Two-Component Developer |
应用两种成分干影剂评价复印机调色剂的试验方法 |
F996-98(2003) |
Standard Test Method for Separating an Ionizing
Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to
Oxide Trapped Holes and Interface States Using the Subthreshold
Current-Voltage Characteristics |
利用次临界伏安特性测定由于氧化空穴和界面性能产生的电离辐射感生金属氧化物半导体场应晶体管临界电压偏移分量的试验方法 |
F997-98a(2003) |
Standard Specification for Polycarbonate Resin for Medical
Applications |
医疗设备用聚碳酸酯树脂 |
F998-04 |
Standard Specification for Centrifugal Pump, Shipboard Use |
船用离心泵 |
F1001-99a(2006) |
Standard Guide for Selection of Chemicals to Evaluate Protective
Clothing Materials |
评定防护服装材料对化学要品的选择 |
F1002-06 |
Standard Performance Specification for Protective Clothing for
Use by Workers Exposed to Specific Molten Substances and Related Thermal
Hazards |
防止工人遭受特种熔化物质和有关高温侵害用防护服装的性能规范 |
F1003-02 |
Standard Specification for Searchlights on Motor Lifeboats |
摩托救生艇探照灯规范 |
F1004-04 |
Standard Consumer Safety Specification for Expansion Gates and
Expandable Enclosures |
金属网门和可扩展网罩用消费者安全规范 |
F1005-91(2002) |
Standard Practice for HVAC Duct Shapes; Identification and
Description of Design Configuration |
采暖、通风与空调导管形状.设计配置的描述和识别 |
F1006-86(2004) |
Standard Specification for Entrainment Separators for Use in
Marine Piping Applications |
船用管道装置用液滴分离器 |
F1007-86(2002) |
Standard Specification for Pipeline Expansion Joints of the
Packed Slip Type for Marine Application |
套装滑动成型或船用管道膨胀节 |
F1011-86(2001) |
Standard Guide for Developing a Hazardous Materials Training
Curriculum for Initial Response Personnel |
对最初治理人员开设危险品处理训练课程 |
F1014-02 |
Standard Specification for Flashlights on Vessels |
船用闪光灯规范 |
F1015-03 |
Standard Test Method for Relative Abrasiveness of Synthetic Turf
Playing Surfaces |
人造草皮运动场表面耐磨性的试验方法 |
F1016-93(2001) |
Standard Practice for Linear Tire Treadwear Data Analysis |
线性轮胎面磨损数据分析 |
F1018-87a(2004) |
Standard Specification for Steel Emergency Gear Stowage
Locker |
钢制应急齿轮货舱上锁箱 |
F1019M-00(2006) |
Standard Specification for Steel Deck Gear Stowage Box
[Metric] |
甲板机械装载葙标准规范(米制) |
F1020-86(2006) |
Standard Specification for Line-Blind Valves for Marine
Applications |
船用暗线阀 |
F1021-95(2001) |
Standard Specification for Feeders, Detergent, Rinse Agent, and
Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines |
商用洗碗碟机和洗玻璃器皿机用加料器,洗涤剂,漂清剂和消毒剂 |
F1022-06 |
Standard Specification for Chemical Sanitizing Commercial
Dishwashing Machines, Recirculated Wash, Fresh Water Rinse Type |
化学消毒商用洗碗碟机,循环洗涤以及清水漂洗等型号机器 |
F1023-99(2004) |
Standard Specification for Dispensers, Powdered Iced Tea |
粉化冰冻茶调合器 |
F1025-94(2006) |
Standard Guide for Selection and Use of Full-Encirclement-Type
Band Clamps for Reinforcement or Repair of Punctures or Holes in
Polyethylene Gas Pressure Pipe |
用于增强或修复聚乙烯煤气压力管上爆裂或破洞的全环绕型带夹紧装置的选择和使用 |
F1026-86(2002) |
Standard Specification for General Workmanship and Performance
Measurements of Hemostatic Forceps |
止血钳的一般工艺和性能测量 |
F1027-86(2002) |
Standard Practice for Assessment of Tissue and Cell
Compatibility of Orofacial Prosthetic Materials and Devices |
口腔颜面修补材料和器械同细胞组织和细胞相容性的评定 |
F1030-86(2004) |
Standard Practice for Selection of Valve Operators |
阀门操作器的选择 |
F1031-00(2006) |
Standard Practice for Training the Emergency Medical Technician
(Basic) |
急救医疗技师培训(基础) |
F1033-00(2004) |
Standard Test Method for Comparing Lift-Off Correction Media |
比较去除型修改液消字灵的试验方法 |
F1035-03 |
Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate
the Discernment Capability of a Tire X-ray Imaging System |
为论证轮胎X射线成象系统的辩别能力橡胶帘布圆盘的使用 |
F1037-05 |
Standard Test Method for Visual Rating of Appearance of
Resilient Floors After In-Service Exposure to Foot Traffic |
多人踩过后弹性地板外观评定的试验方法 |
F1038-02(2006) |
Standard Test Method for Motor Life Evaluation of a Canister,
Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven
Agitator |
家用罐式真空吸尘器发动机寿命评定的试验方法 |
F1040-87(2001) |
Standard Specification for Filter Units, Air Conditioning
Viscous-Impingement and Dry Types, Replaceable |
粘液滞附着和干燥型可互换空调过滤器部件 |
F1041-02 |
Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe
and Tubing |
聚烯烃燃气压力管挤出 |
F1042-87(2004) |
Standard Practice for Estimating Toner and Dispersant Usage in
Copiers Utilizing Liquid Developers |
评定复印机超荷液体显影剂中的调色剂和分散剂 |
F1043-04 |
Standard Specification for Strength and Protective Coatings on
Metal Industrial Chain Link Fence Framework |
金属工业链护栏框架强度和保护镀层标准规范 |
F1044-05 |
Standard Test Method for Shear Testing of Calcium Phosphate
Coatings and Metallic Coatings |
多孔的金属涂层剪切试验方法 |
F1045-06 |
Standard Performance Specification for Ice Hockey Helmets |
冰球运动员用面罩防护性能规范 |
F1046-01 |
Standard Guide for Preparing Artificially Worn Passenger and
Light Truck Tires for Testing |
检验用人工磨损客车和轻型货车轮胎 |
F1047-04 |
Standard Specification for Frying and Braising Pans, Tilting
Type |
倾斜翻转型煎蒸平锅 |
F1050-87(2005) |
Standard Test Method for Determining Winding Torque and Tension
of Typewriter Ribbons |
测定打字机色带绕矩和伸张力的测试方法 |
F1051-00(2004) |
Standard Test Method for Comparing Multistrike Film Ribbons |
比较多次打击薄膜打字色带的试验方法 |
F1052-97(2002) |
Standard Test Method for Pressure Testing Vapor Protective
Ensembles |
气密的全密封化工防护套服的加压试验 |
F1055-98e1 |
Standard Specification for Electrofusion Type Polyethylene
Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing |
外径控制的聚乙烯管和管路用电熔型聚乙烯配件 |
F1056-04 |
Standard Specification for Socket Fusion Tools for Use in Socket
Fusion Joining Polyethylene Pipe or Tubing and Fittings |
套管熔融连接聚乙烯管和配件用套管熔融工具 |
F1057-87(2005) |
Standard Practice for Estimating the Quality of Extruded Poly
(Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique |
用热回复技术评定挤压聚乙烯管的质量 |
F1058-02 |
Standard Specification for Wrought
40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire and Strip for
Surgical Implant Applications (UNS R30003 and UNS R30008) |
外科植入物用煅制钴-铬-镍-钼-铁合金 |
F1060-05 |
Standard Test Method for Thermal Protective Performance of
Materials for Protective Clothing for Hot Surface Contact |
表面接触热的防护服装材料的热防护性能的试验方法 |
F1061-97(2003) |
Specification for Ski Binding Test Devices |
滑雪板装配测试装置 |
F1062-97(2003) |
Standard Test Method for Verification of Ski Binding Test
Devices |
滑雪板装配测试装置校验的试验方法 |
F1063-05 |
Standard Practice for Functional Inspections and Adjustments of
Alpine Ski/Binding/Boot Systems |
高山滑雪板/靴/绑带件的功能检验和调试 |
F1064-06 |
Standard Practice for Sampling and Inspection of Complete and
Incomplete Alpine Ski/Binding/Boot Systems in Rental Applications |
租用的整套高山滑雪板/靴/绑带系统的抽样和检验 |
F1066-04 |
Standard Specification for Vinyl Composition Floor Tile |
乙烯基合成地板砖 |
F1068-90(2003) |
Standard Specification for Doors, Double, Gastight/Airtight,
Individually Dogged, for Marine Use |
船用气体/空气密封(不透气)双层单独安夹扣的门 |
F1069-87(2004) |
Standard Specification for Doors, Watertight, Gastight/Airtight
and Weathertight, Individually Dogged, for Marine Use |
船用水密,气密/不透气和不透风各扇单独安夹扣的门 |
F1070-87(2004) |
Standard Specification for Doors, Non-Tight, for Marine Use |
船用非密闭门 |
F1071-94(2006) |
Standard Specification for Expanded-Metal Bulkhead Panels |
金属网舱壁隔板 |
F1072-94(2006) |
Standard Specification for Expanded-Metal Doors |
金属网门 |
F1073-87(1999) |
Standard Specification for Door Fittings, for
Watertight/Gastight/Airtight, Weathertight, and Non-Tight Doors, for
Marine Use |
船用水密,气密/不透气和防风雨及无夹扣门的门配件 |
F1074-87(2002) |
Standard Specification for Cleats, Welded Horn Type |
焊接喇叭型绳栓 |
F1075-97(2004) |
Standard Specification for Dehumidifier, Shipboard, Mechanically
Refrigerated, Self-Contained |
自带机械制冷的减湿器 |
F1076-87(2004) |
Standard Practice for Expanded Welded and Silver Brazed Socket
Joints for Pipe and Tube |
管用扩张焊接及银黄铜套管连接件 |
F1077-05 |
Standard Guide for Selection of Committee F16 Fastener
Specifications |
F-16 委员会紧固件规范的选择 |
F1078-87(2002) |
Standard Terminology for Surgical Scissors—Inserted and
Non-Inserted Blades |
外科镶刃与不镶刃剪术语 |
F1079-87(2002) |
Standard Specification for Inserted and Noninserted Surgical
Scissors |
外科镶刃与不镶刃剪 |
F1080-93(2002) |
Standard Test Method for Determining the Consistency of Viscous
Liquids Using a Consistometer |
用稠度计测定粘液稠度的试验方法 |
F1081-97(2003)e1 |
Standard Specification for Competition Wrestling Mats |
比赛摔交垫子 |
F1083-04 |
Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated
(Galvanized) Welded, for Fence Structures |
栅栏结构用热浸镀锌焊接钢管 |
F1084-90(2002) |
Standard Guide for Sampling Oil/Water Mixtures for Oil Spill
Recovery Equipment |
漏油回收设备用油水混合物样品的采集 |
F1085-03a |
Standard Specification for Mattress and Box Springs for Use in
Berths in Marine Vessels |
船舱中床铺床垫及箱式弹簧 |
F1086-94(2002) |
Standard Guide for Structures and Responsibilities of Emergency
Medical Services Systems Organizations |
急救医疗服务系统组织的结构和可靠性 |
F1087-02 |
Standard Test Method for Linear Dimensional Stability of a
Gasket Material to Moisture |
衬垫受潮后的线性尺寸稳定性的试验方法 |
F1088-04ae1 |
Standard Specification for Beta-Tricalcium Phosphate for
Surgical Implantation |
外科植入物用β-磷酸三钙 |
F1089-02 |
Standard Test Method for Corrosion of Surgical Instruments |
外科仪器腐蚀的试验方法 |
F1090-06 |
Standard Classification for Bank and Mercantile Vault
Construction |
银行和商业用保险库建筑的分类 |
F1091-02 |
Standard Specification for Wrought Cobalt-20 Chromium-15
Tungsten-10 Nickel Alloy Surgical Fixation Wire (UNS R30605) |
轧制钴-铬合金外科固定金属线 |
F1092-04 |
Standard Specification for Fiberglass (GRP) Pultruded
Open-Weather Storm and Guard, Square Railing Systems |
挤拔玻璃纤维增强塑料制露天防风暴和方型防护扶手 |
F1093-99 |
Standard Test Methods for Tensile Strength Characteristics of
Oil Spill Response Boom |
滑油溢流拦油栅抗拉强度特性的标准试验方法 |
F1094-87(2005) |
Standard Test Methods for Microbiological Monitoring of Water
Used for Processing Electron and Microelectronic Devices by Direct
Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method |
用直接加压分接抽样阀和用预先消毒塑料包法对电子和微电子器件加工用水微生物监测的测试方法 |
F1097-91(2001) |
Standard Specification for Mortar, Refractory (High-Temperature,
Air-Setting) |
耐火灰浆(高温,空气凝固) |
F1098-87(2004) |
Standard Specification for Envelope Dimensions for Butterfly
Valves-NPS 2 to 24 |
管子公称尺寸2-24号用蝶阀外壳尺寸 |
F1099M-98(2005) |
Standard Specification for Rat Guards, Ship's (Metric) |
船用防鼠装置规范 |
F1101-90(2003)e1 |
Standard Specification for Ventilators Intended for Use During
Anesthesia |
麻醉时用通风机 |
F1104-02 |
Standard Test Method for Preparing Aircraft Cleaning Compounds,
Liquid Type, Water Base, for Storage Stability Testing |
贮藏稳定性检验用液态及水基的飞行器清洗化合物制备的试验方法 |
F1105-03 |
Standard Test Method for Preparing Aircraft Cleaning Compounds,
Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage
Stability Testing |
贮藏稳定性检验用溶剂基液态飞行器清洗化合物制备的试验方法 |
F1106-87(2006) |
Standard Specification for Warping Heads, Rope Handling (Gypsy
Head, Capstan Head) |
绞缆筒装置(绞绳筒,绞盘架) |
F1107-04 |
Standard Terminology Relating to Snowboarding |
有关雪橇的名词术语 |
F1108-04 |
Standard Specification for Titanium-6Aluminum-4Vanadium Alloy
Castings for Surgical Implants (UNS R56406) |
外科移植用Ti6Al4V合金铸件 |
F1110-02 |
Standard Test Method for Sandwich Corrosion Test |
夹层腐蚀试验方法 |
F1111-02 |
Standard Test Method for Corrosion of Low-Embrittling Cadmium
Plate by Aircraft Maintenance Chemicals |
用飞行器维护化学膜法测定低脆化镉板防腐蚀性的试验方法 |
F1112-06a |
Standard Test Method for Static Testing of Tubeless Pneumatic
Tires for Rate of Loss of Inflation Pressure |
静态测试无管空心充气轮胎的充气压力损耗率的试验方法 |
F1113-87(2005)e1 |
Standard Test Method for Electrochemical Measurement of
Diffusible Hydrogen in Steels (Barnacle Electrode) |
电机测量钢中可扩散氢的试验方法 |
F1114-06 |
Standard Specification for Heat Sanitizing Commercial Pot, Pan,
and Utensil Station Rack Type Water-Driven Rotary Spray |
商业用的热消毒筒,槽和架式水驱动旋转喷射器皿站 |
F1115-95(2001) |
Standard Test Method for Determining the Carbon Dioxide Loss of
Beverage Containers |
测定饮料容器二氧化碳损失的试验方法 |
F1116-03 |
Standard Test Method for Determining Dielectric Strength of
Dielectric Footwear |
测量套鞋靴介电强度的试验方法 |
F1117-03 |
Standard Specification for Dielectric Footwear |
介电防护鞋 |
F1118-91(2003) |
Standard Specification for National Air Medical Transport Units
Resources Catalog |
国家空中医疗运输设备资源目录 |
F1120-87(2004) |
Standard Specification for Circular Metallic Bellows Type
Expansion Joints for Piping Applications |
管道用循环金属风箱型膨胀节 |
F1121-87(2004) |
Standard Specification for International Shore Connections for
Marine Fire Applications |
船舶灭火用国际海岸通讯线 |
F1122-04 |
Standard Specification for Quick Disconnect Couplings (6 in. NPS
and Smaller) |
快速拆卸联轴节 |
F1123-87(2004) |
Standard Specification for Non-Metallic Expansion Joints |
非金属的膨胀节 |
F1125-87(2006) |
Standard Termninology of Image Quality in Impact Printing
Systems |
打印系统中成象质量术语 |
F1126-03 |
Standard Specification for Food Cutters (Electric) |
食品电切刀标准规范 |
F1127-01 |
Standard Guide for Containment by Emergency Response Personnel
of Hazardous Material Spills |
危险品泄漏紧急治理人员设置封锁线 |
F1129-01 |
Standard Guide for Using Aquious Foams to Control the Vapor
Hazard from Immiscible Volatile Liquids |
使用含水泡沫控制不溶混的挥发性液体中产生的蒸发危害的指南 |
F1130-99(2005) |
Standard Practice for Inspecting the Coating System of a Ship |
船干舷及上部结构涂料系统的检验 |
F1134-94(2002) |
Standard Specification for Insulation Resistance Monitor for
Shipboard Electrical Motors and Generators |
船用电动机和发电机绝缘电阻监测器 |
F1135-99(2004) |
Standard Specification for Cadmium or Zinc Chromate Organic
Corrosion Protective Coating for Fasteners |
紧固件用铬酸镉或锌有机防蚀镀层 |
F1136-04 |
Standard Specification for Zinc/Aluminum Corrosion Protective
Coatings for Fasteners |
紧固件用铬或锌防蚀镀层 |
F1136M-04 |
Standard Specification for Zinc/Aluminum Corrosion Protective
Coatings for Fasteners [Metric] |
紧固件用铬或锌防蚀镀层(米制) |
F1137-00(2006) |
Standard Specification for Phosphate/Oil and Phosphate/Organic
Corrosion Protective Coatings for Fasteners |
紧固件用磷酸盐/油和磷酸盐/有机防蚀镀层 |
F1138-98(2003) |
Standard Specification for Spray Shields for Mechanical
Joints |
机械连接件挡溅射板 |
F1139-88(2004) |
Standard Specification for Steam Traps and Drains |
蒸汽疏水阀和排水管 |
F1140-00(2005) |
Standard Test Methods for Internal Pressurization Failure
Resistance of Unrestrained Packages for Medical Applications |
医疗设备用可伸缩的和软包装箱抗损坏性的试验方法 |
F1141-93(2004) |
Standard Specification for Wallcovering |
墙面饰层 |
F1142-98(2003) |
Standard Specification for Manhole Cover Assembly Bolted,
Semi-Flush, Oiltight and Watertight |
防油防水半嵌入螺栓连接检查孔盖组件 |
F1143-98(2003) |
Standard Specification for Manhole Cover Assembly, Bolted,
Raised, Oiltight and Watertight |
防油防水隆起检查孔盖组件 |
F1144-98(2003) |
Standard Specification for Manhole Cover Assembly, Bolted,
Semi-Flush, Oiltight and Watertight, Hinged |
防油防水半嵌入螺栓铰接检查孔盖组件 |
F1145-05 |
Standard Specification for Turnbuckles, Swaged, Welded,
Forged |
冷锻,焊接,锻制松紧螺纹扣 |
F1147-05 |
Standard Test Method for Tension Testing of Calcium Phosphate
and Metal Coatings |
多孔金属覆层张力检验的试验方法 |
F1148-05 |
Standard Consumer Safety Performance Specification for Home
Playground Equipment |
家用游乐场器材的消费者安全性能规范 |
F1149-93(2003) |
Standard Practice for Qualifications, Responsibilities, and
Authority of Individuals and Institutions Providing Medical Direction of
Emergency Medical Services |
急救服务上能提供直接治疗的个人和机构的资格鉴定,可靠性和权限 |
F1150-06 |
Standard Specification for Commercial Food Waste Pulper and
Waterpress Assembly |
商业食品废弃物搅碎机和水压装置 |
F1151-88(2003) |
Standard Test Method for Determining Variations in Hardness of
Film Ribbon Pancakes |
薄膜打字色带硬度变化的试验方法 |
F1154-99a(2004) |
Standard Practices for Qualitatively Evaluating the Comfort,
Fit, Function, and Integrity of Chemical-Protective Suit Ensembles |
化学防护服装舒适、配套、功能和完善的质量评定 |
F1155-98(2004) |
Standard Practice for Selection and Application of Piping System
Materials |
管道系统材料的选择与应用 |
F1157-04 |
Standard Practice for Classifying the Relative Performance of
the Physical Properties of Security Seals |
有关安全密封件物理性能的分类 |
F1158-94(2001) |
Standard Guide for Inspection and Evaluation of Tampering of
Security Seals |
安全密封压实检验和评定 |
F1159-03a |
Standard Practice for Design and Manufacture of Patron Directed,
Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water
Immersion Amusement Rides and Devices and Air-Supported Structures |
娱乐运动器材和设备的设计及施工 |
F1160-05 |
Standard Test Method for Shear and Bending Fatigue Testing of
Calcium Phosphate and Metallic Medical and Composite Calcium
Phosphate/Metallic Coatings |
多孔金属镀覆金属材料恒定应力作用疲劳试验的检验方法 |
F1162-02 |
Standard Specification for Pole Vault Landing Systems |
撑杆跳高降落坑 |
F1163-04a |
Standard Specification for Protective Headgear Used in Horse
Sports and Horseback Riding |
骑马运动和骑马行驶用防护帽 |
F1164-97(2003) |
Standard Test Method for Evaluation of Transparent Plastics
Exposed to Accelerated Weathering Combined with Biaxial Stress |
透明塑料受到双轴应力与加速老化影响的评定试验方法 |
F1165-98(2004) |
Standard Test Method for Measuring Angular Displacement of
Multiple Images in Transparent Parts |
透明部件中测量多重图像角度移动的试验方法 |
F1166-95a(2006) |
Standard Practice for Human Engineering Design for Marine
Systems, Equipment and Facilities |
航海系统、设备和器材的人类工效设计 |
F1169-03 |
Standard Specification for Full Size Baby Crib |
足尺寸的婴儿带栏杆小床 |
F1172-88(2004) |
Standard Specification for Fuel Oil Meters of the Volumetric
Positive Displacement Type |
容积式燃料油流量计 |
F1173-01(2006) |
Standard Specification for Thermosetting Resin Fiberglass Pipe
Systems to Be Used for Marine Applications |
航海用还氧树脂玻璃纤维管和配件 |
F1174-01(2006) |
Standard Practice for Using a Personal Computer Printer as a
Test Instrument |
个人计算机打印机的检测仪的使用 |
F1175-88(2006) |
Standard Practice for Using the Computer Impact Print-Out Unit
as a Test Instrument for Manifold Comparison |
多种比较用个人计算机打印机的检测仪的使用 |
F1176-01e1 |
Standard Practice for Design and Installation of Underground
Thermoplastic Irrigation Systems With Maximum Working Pressure of 125
psi |
最大工作压力为63psi(磅/平方英寸)热塑灌溉系统的设计和安装 |
F1177-02 |
Standard Terminology Relating to Emergency Medical Services |
急诊服务的相关术语 |
F1178-01 |
Standard Specification for Enameling System, Baking, Metal
Joiner Work and Furniture |
上光系统,烘烤,金属连接装置和家具 |
F1179-88(2002) |
Standard Practice for Inspection Procedure for Use of Anaerobic
Thread Locking Compounds with Studs |
螺栓螺纹锁定厌氧复合物使用的检验程序 |
F1181-96(2003) |
Standard Test Method for Measuring Binocular Disparity in
Transparent Parts |
测量透明部件中双筒镜差异的试验方法 |
F1182-90(2001) |
Standard Specification for Anodes, Sacrificial Zinc Alloy |
阳极,镀锌合金 |
F1183-96(2006) |
Standard Specification for Aluminum Alloy Chain Link Fence
Fabric |
铝合金链环栅栏结构 |
F1184-05 |
Standard Specification for Industrial and Commercial Horizontal
Slide Gates |
工业和商业用水平滑动门 |
F1185-03 |
Standard Specification for Composition of Hydroxylapatite for
Surgical Implants |
外科植入用羟磷灰石的成分标准规范 |
F1186-03 |
Standard Classification System for Chemicals According to
Functional Groups |
按功能组划分的化学药品分类系统 |
F1190-99(2005) |
Standard Guide for Neutron Irradiation of Unbiased Electronic
Components |
未加偏压的电子元件的中子照射 |
F1192-00(2006) |
Standard Guide for the Measurement of Single Event Phenomena
(SEP) Induced by Heavy Ion Irradiation of Semiconductor Devices |
半导体器件的重离子照射引起的单事件现象测量的标准指南(米制) |
F1193-06 |
Practice for Quality, Manufacture, and Construction of Amusement
Rides and Devices |
娱乐运动器械及设备制造商的质量保证计划 |
F1194-99(2005) |
Standard Guide for Documenting the Results of Chemical
Permeation Testing of Materials Used in Protective Clothing |
防护服装材料化学品渗透性检验结果的报告 |
F1195-99 |
Standard Specification for Rigid Laryngoscopes for Tracheal
Intubation-Hook on Fittings for Fiberilluminated Blades and Handles |
气管插管术用硬质喉镜.纤维发光手术刀及柄用钩接式配件 |
F1196-00 |
Standard Specification for Sliding Watertight Door Assemblies |
防水拉门装配 |
F1197-00 |
Standard Specification for Sliding Watertight Door Control
Systems |
推拉防水门控制系统 |
F1198-92(2002) |
Standard Guide for Shipboard Fire Detection Systems |
舰艇防火监视系统 |
F1199-88(2004) |
Standard Specification for Cast (All Temperatures and Pressures)
and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
铸造(各种温度及各种压力)和焊接管道过滤器(最大表压为150磅/英寸及最大温度150华氏度) |
F1200-88(2004) |
Standard Specification for Fabricated (Welded) Pipe Line
Strainers (Above 150 psig and 150°F) |
制造好的(焊接)管道过滤器(表压大于150磅/英寸及温度为150华氏度) |
F1201-88(2004) |
Standard Specification for Fluid Conditioner Fittings in Piping
Applications Above 0°F |
温度大于零华氏度的管道用流体调节器配件 |
F1202-06 |
Standard Specification for Washing Machines, Heat Sanitizing,
Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type |
洗涤机.商用立式摆臂型盘、碟和器皿加热消毒设施 |
F1203-06 |
Standard Specification for Washing Machines-Pot, Pan, and
Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type |
洗涤机.商用旋转传送带式盘、碟和器皿加热消毒设施 |
F1205-88(1999) |
Standard Specification for Anesthesia Breathing Tubes |
麻醉用呼吸管 |
F1206-94(2005) |
Standard Test Method for Evaluating Color Image Output from
Color Printers and Copiers |
评定彩色打印机和复印机产生的彩色图象的测试方法 |
F1207M-96(2002) |
Standard Specification for Electrical Insulation Monitors for
Monitoring Ground Resistance in Active Electrical Systems [Metric] |
监视激活电子系统中接地电阻用电绝缘监视器标准规范(米制单位) |
F1208-89(2005) |
Standard Specification for Minimum Performance and Safety
Requirements for Anesthesia Breathing Systems |
麻醉呼吸系统的最低性能和安全要求 |
F1209-89(1999) |
Standard Guide for Ecological Considerations for the Use of
Oilspill Dispersants in Freshwater and Other Inland Environments, Ponds
and Sloughs |
在淡水和其它内陆环境、池塘及沼泽中使用浮油分散剂的生态条件 |
F1210-89(1999) |
Standard Guide for Ecological Considerations for the Use of
Oilspill Dispersants in Freshwater and Other Inland Environments, Lakes
and Large Water Bodies |
在淡水和其它内陆环境、湖泊及大型水体中使用浮油分散剂的生态条件 |
F1211-89(2001) |
Standard Specification for Semiconductor Device Passivation
Opening Layouts |
半导体器件无源断开电路设计 |
F1212-89(2002) |
Standard Test Method for Thermal Stability Testing of Gallium
Arsenide Wafers |
砷化镓晶片热稳定性的试验方法 |
F1216-06 |
Standard Practice for Rehabilitation of Existing Pipelines and
Conduits by the Inversion and Curing of a Resin-Impregnated Tube |
树脂浸渍管倒置和硫化条件下现有管线和管道的修复 |
F1217-03 |
Standard Specification for Cooker, Steam |
蒸汽炊具 |
F1218-89(1999) |
Standard Specification for Bronchoscopes (Rigid) |
支气管镜(硬质的) |
F1220-95(2006) |
Standard Guide for Emergency Medical Services System (EMSS)
Telecommunications |
应急医疗服务系统(EMSS)远程通信 |
F1221-89(2006) |
Standard Guide for Interagency Information Exchange |
机构间的信息交换 |
F1223-05 |
Standard Test Method for Determination of Total Knee Replacement
Constraint |
整个膝部复位固定情况的测定试验方法 |
F1224-89(2004)e1 |
Standard Guide for Providing System Evaluation for Emergency
Medical Services |
急救医疗服务供应系统评定 |
F1225-99(2003) |
Standard Test Method for Measuring the Ribbon Exit Force for
Film and Fabric Cartridges |
测量胶片和纤维盒的打印带出口力的测试方法 |
F1229-01(2006) |
Standard Guide for the Qualification and Training of EMS
Air-Medical Patient Care Providers |
急救医疗服务机上患者医疗护理人员的资格鉴定、教育和训练计划的制定 |
F1231-89(1999) |
Standard Guide for Ecological Considerations for the Use of
Oilspill Dispersants in Freshwater and Other Inland Environments, Rivers
and Creeks |
在淡水及其它内陆环境、河流和小溪中使用浮油分散剂的生态条件 |
F1232-98(2003) |
Standard Practice for Generating a Test Pattern for Single-Pass
Film Ribbons |
一次性薄膜色带测试码模式的形成 |
F1233-98(2004) |
Standard Test Method for Security Glazing Materials And
Systems |
保险玻璃材料和系统的试验方法 |
F1235-03 |
Consumer Safety Specification for Portable Hook-on Chairs |
便携式钩接式座椅的安全使用要求 |
F1236-96(2001) |
Standard Guide for Visual Inspection of Electrical Protective
Rubber Products |
电气保护用橡胶制品的外观检查 |
F1237-04 |
Standard Specification for Commercial Dishwashing Machines,
Multiple-Tank, Continuous Oval-Conveyor Type, Heat Sanitizing |
商用多罐椭圆形连续输送型加热消毒洗碗机 |
F1238-95(2003) |
Standard Specification for Refractory Silicide Sputtering
Targets for Microelectronic Applications |
微电子设备用耐熔硅化物溅射电极 |
F1240-01 |
Standard Guide for Ranking Footwear Bottom Materials on
Contaminated Walkway Surfaces According to Slip Resistance Test Results |
鞋靴在有不同外来杂质界面的通道表面上的防滑性测量分类结果 |
F1244-89(2004) |
Standard Specification for Berths, Marine |
船舶起居室 |
F1245-89(2006) |
Standard Specification for Faucets, Single and Double,
Compression and Self-Closing Type, Shipboard |
船舶用压缩和自闭型,单式与双式水龙头 |
F1246-91(2005) |
Standard Specification for Electrically Powered Home Care
Ventilators, Part 1-Positive-Pressure Ventilators and Ventilator
Circuits |
家庭护理用电动排风扇.第1部分:负压电动排风扇和排风扇电路 |
F1247-89(2005) |
Standard Specification for Intrusion Resistant Generic Vault
Structures |
一般拱形结构的抗侵入性 |
F1248-96(2002)e1 |
Standard Test Method for Determination of Environmental Stress
Crack Resistance (ESCR) of Polyethylene Pipe |
测定聚氯乙烯管抗环境应力破裂性的试验方法 |
F1249-06 |
Standard Test Method for Water Vapor Transmission Rate Through
Plastic Film and Sheeting Using a Modulated Infrared Sensor |
利用调幅红外线传感器对水蒸气透过塑料薄膜和薄板穿透率的测试方法 |
F1250-00(2006) |
Standard Safety Specification for Stationary Exercise
Bicycles |
固定式训练用自行车的安全使用规范 |
F1251-89(2003) |
Standard Terminology Relating to Polymeric Biomaterials in
Medical and Surgical Devices |
医疗和外科器械用聚合生物材料的相关术语 |
F1252-89(2002) |
Standard Test Method for Measuring Optical Reflectivity of
Transparent Materials |
测量透明材料光反射率的试验方法 |
F1254-90(2001) |
Standard Practice for Performance of Prehospital Manual
Defibrillation |
送进医院之前的人工去纤颤操作 |
F1255-90(2002) |
Standard Practice for Performance of Prehospital Automated
Defibrillation |
送进医院之前的自动去纤颤操作 |
F1256-90(2002) |
Standard Guide for Selection and Practice of Emergency Medical
Services Instructor for Basic Life Support/Emergency Medical Technician
(BLS/EMT) Training Programs |
基本救生/急救技术人员(BLS/EMT)培训计划所需急救医疗服务讲师的选择和实习 |
F1257-90(2002) |
Standard Guide for Selection and Practice of Emergency Medical
Services Instructor for Advanced Life Support/Emergency Medical Technician
(ALS/EMT) Training Programs |
救生/急救技术人员(ALS/EMT)培训计划所需急救医疗服务讲师的选择和实习 |
F1258-95(2006) |
Standard Practice for Emergency Medical Dispatch |
应急医疗调度 |
F1259M-96(2003) |
Standard Guide for Design of Flat, Straight-Line Test Structures
for Detecting Metallization Open-Circuit or Resistance-Increase Failure
Due to Electromigration [Metric] |
金属电迁移造成的喷镀开路或阻力增加失效率检测用平板,直线试验结构的设计标准指南(米制单位) |
F1260M-96(2003) |
Standard Test Method for Estimating Electromigration Median
Time-to-Failure and Sigma of Integrated Circuit Metallizations [Metric] |
集成电路金属喷镀总量和电迁移中值失效时间的评定标准试验方法(米制单位) |
F1261M-96(2003) |
Standard Test Method for Determining the Average Electrical
Width of a Straight, Thin-Film Metal Line [Metric] |
薄膜金属直线平均电宽度测定的标准试验方法 |
F1262M-95(2002) |
Standard Guide for Transient Radiation Upset Threshold of
Digital Integrated Circuits |
数字集成电路瞬间辐射临界范围指南 |
F1263-99(2005) |
Standard Guide for Analysis of Overtest Data in Radiation
Testing of Electronic Parts |
电子元件辐射试验中超量试验数据分析 |
F1264-03 |
Standard Specification and Test Methods for Intramedullary
Fixation Devices |
髓内固定器械的机械性能要求 |
F1265-03a |
Standard Test Method for Resistance to Impact for Resilient
Floor Tile |
弹性铺地砖的抗冲击性测试方法 |
F1266-89(2002) |
Standard Performance Specification for Cerebral Stereotactic
Instruments |
脑部立体手术器械的性能规范 |
F1267-01 |
Standard Specification for Metal, Expanded, Steel |
网状钢金属材料 |
F1268-90(2003) |
Standard Guide for Establishing and Operating a Public
Information, Education, and Relations Program for Emergency Medical
Service Systems |
公共信息,教育和有关的急救医疗服务系统的建立和运行 |
F1269-06 |
Test Methods for Destructive Shear Testing of Ball Bonds |
球压焊的破坏性剪切试验方法 |
F1270-97(2002) |
Standard Practice for Preparing and Locating Emergency Muster
Lists |
急救站名表的编制和定位 |
F1271-90(2006) |
Standard Specification for Spill Valves for Use in Marine Tank
Liquid Overpressure Protections Applications |
船上储罐液体过压保护装置用溢流阀 |
F1273-91(2002) |
Standard Specification for Tank Vent Flame Arresters |
防火用油罐通气孔 |
F1275-03e1 |
Standard Test Method for Performance of Griddles |
筛子性能的测试方法 |
F1276-99(2003) |
Standard Test Method for Creep Relaxation of Laminated Composite
Gasket Materials |
复合密封材料的蠕变松弛试验方法 |
F1277-02 |
Standard Test Method for Determination of Leachable Chloride in
Packing and Gasketing Materials by Ion-Selective Electrode Technique |
用离子选择电极技术时测定包装和衬垫材料中可沥虑氯化物的测试方法 |
F1278-96(2003) |
Standard Guide for Use and Handling of Flexible Retort Food
Pouches in the Processing Environment |
生产环境中软蒸馏食品袋的使用和处理 |
F1279-90(1999) |
Standard Guide for Ecological Considerations for the Use of
Oilspill Dispersants in Freshwater and Other Inland Environments,
Permeable Surfaces |
淡水和其它内陆环境渗透性表面中油溢出物使用的生态考虑标准导则 |
F1280-90(1999) |
Standard Guide for Ecological Considerations for the Use of
Oilspill Dispersants in Freshwater and Other Inland Environments,
Impermeable Surfaces |
在淡水及其它内陆环境、非渗透层上使用浮油分散剂的生态条件 |
F1281-05 |
Standard Specification for Crosslinked
Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure
Pipe |
交联聚乙烯/铝/交联聚乙烯(PEX-AL-PEX)压力管 |
F1282-06 |
Standard Specification for Polyethylene/Aluminum/Polyethylene
(PE-AL-PE) Composite Pressure Pipe |
聚乙烯/铝/聚乙烯(PE-AL-PE)复合压力管 |
F1284-04 |
Standard Test Method for Evaluating Carpet Embedded Dirt Removal
Effectiveness of Residential Central Vacuum Cleaning Systems |
测定住宅中心真空吸尘系统除去地毯深处灰尘的效果的试验方法 |
F1285-90(2003) |
Standard Guide for Training the Emergency Medical Technician
(Basic) to Perform Patient Examination Techniques |
急救人员实施对患者检查技术的培训 |
F1286-90(2002) |
Standard Guide for Development and Operation of Level 1
Pediatric Trauma Facilities |
1级儿科休克护理设备的研制和操作 |
F1287-90(2002) |
Standard Guide for Scope of Performance of First Responders Who
Provide Emergency Medical Care |
提供应急医疗护理的急救应答器性能范围 |
F1288-90(2003) |
Standard Guide for Planning for and Response to a Multiple
Casualty Incident |
多起意外事故应答器的设计 |
F1290-98a(2004) |
Standard Practice for Electrofusion Joining Polyolefin Pipe and
Fittings |
电熔融连接聚烯烃管及配件 |
F1291-05 |
Standard Test Method for Measuring the Thermal Insulation of
Clothing Using a Heated Manikin |
利用加热的人体模型穿的衣服测量隔热性的试验方法 |
F1292-04 |
Standard Specification for Impact Attenuation of Surfacing
Materials within the Use Zone of Playground Equipment |
游乐场设施的使用区域的表面材料的减震性 |
F1294-97a(2003) |
Standard Terminology Relating to Automatic Identification Hard
Copy Printing Systems |
有关自动识别硬拷贝印刷系统标准术语 |
F1295-05 |
Standard Specification for Wrought Titanium-6 Aluminum-7 Niobium
Alloy for Surgical Implant Applications (UNS R56700) |
外科植入物用锻制Ti6Al7Nb合金 |
F1296-03 |
Standard Guide for Evaluating Chemical Protective Clothing |
化工防护服的评定 |
F1297-90(2005) |
Standard Guide for Location and Instruction Symbols for
Evacuation and Lifesaving Equipment |
撤离和救生设备用定位及说明符号 |
F1298-90(2006) |
Standard Specification for Flexible, Expansion-Type Ball Joints
for Marine Applications |
船用柔性扩展型球连接 |
F1301-90(2006) |
Standard Practice for Labeling Chemical Protective Clothing |
化工防护套服用标记 |
F1303-04 |
Standard Specification for Sheet Vinyl Floor Covering with
Backing |
带背衬薄板型乙烯地面覆盖物 |
F1304-03 |
Standard Test Method for Deflection of Resilient Floor Tile |
弹性地板砖挠曲性试验方法 |
F1305-94(2002) |
Standard Guide for Classification of Amusement Ride and Device
Related Injuries and Illnesses |
与受伤和疾病相关的娱乐骑座和装置的分类 |
F1306-90(2002) |
Standard Test Method for Slow Rate Penetration Resistance of
Flexible Barrier Films and Laminates |
挠性阻挡层和叠层板材抗慢速渗透性的试验方法 |
F1307-02 |
Standard Test Method for Oxygen Transmission Rate Through Dry
Packages Using a Coulometric Sensor |
用电量传感器测定干燥包装件氧渗透率的试验方法 |
F1308-98(2003) |
Standard Test Method for Quantitating Volatile Extractables in
Microwave Susceptors Used for Food Products |
食品用微波传感器中易挥发可萃取物量化的测试方法 |
F1309-98(2003) |
Standard Practice for Installation Procedures for Fitting Chocks
to Marine Machinery Foundations |
将制动器装到船用机械基础上的安装程序 |
F1311-90(2001) |
Standard Specification for Large-Diameter Fabricated Carbon
Steel Flanges |
大直径制造的碳钢法兰 |
F1312-90(2002) |
Standard Specification for Brick, Insulating, High Temperature,
Fire Clay |
高温隔热耐火粘土砖 |
F1313-90(2005) |
Standard Specification for Volatile N-Nitrosamine Levels in
Rubber Nipples on Pacifiers |
橡皮奶头上的橡胶短接管中挥发性N-亚硝胺含量的等级 |
F1314-01 |
Standard Specification for Wrought Nitrogen Strengthened 22
Chromium - 13 Nickel - 5 Manganese - 2.5 Molybdenum Stainless Steel Alloy
Bar and Wire for Surgical Implants (UNS S20910) |
外科植入用锻制氮增强的,高锰,高铬不锈钢条和钢丝 |
F1315-00 |
Standard Test Method for Density of a Sheet Gasket Material |
密封垫板材料密度的测试方法 |
F1316-90(2002) |
Standard Test Method for Measuring the Transmissivity of
Transparent Parts |
测量透明零件透射率的试验方法 |
F1317-98(2002) |
Standard Test Method for Calibration of Microwave Ovens |
校准微波炉的测试方法 |
F1318-90(2003) |
Standard Test Method for Determination of Productivity Using
Electrostatic Copy Machines with Various Configurations |
使用不同配置的静电复制设备生产能力的测试方法 |
F1319-94(2005) |
Standard Test Method for Determination of Abrasion and Smudge
Resistance of Images Produced from Business Copy Products (Crockmeter
Method) |
测定商务复印设备复制图形的防污损性能的测试方法(耐磨色牢度测定器法) |
F1320-01(2006) |
Standard Test Method for Evaluating Thermal Paper Employing a
Facsimile Thermal Printer as a Test Instrument |
使用传真热敏式打印机作为测试工具评定热纸的测试方法 |
F1321-92(2004) |
Standard Guide for Conducting a Stability Test (Lightweight
Survey and Inclining Experiment) to Determine the Light Ship Displacement
and Centers of Gravity of a Vessel |
进行测定船舶重心和轻船移动的稳定试验(空船重量调查和倾斜实验) |
F1322-90(2004) |
Standard Guide for Selection of Shipboard Incinerators |
船上焚烧装置的选择 |
F1323-01 |
Standard Specification for Shipboard Incinerators |
舰船用煅烧炉(焚烧装置)技术规范 |
F1325-91(2002) |
Standard Specification for Stainless Steel Suture Needle
Holders-General Workmanship Requirements and Corresponding Test Methods |
不锈钢缝合用针托.一般技术要求和通信试验方法 |
F1326-02(2006) |
Standard Test Method for Measuring Maximum Dry Volume of Utility
Vacuum Cleaners |
测量通用真空吸尘器的最大干燥空间的试验方法 |
F1327-05 |
Standard Terminology Relating to Barrier Materials for Medical
Packaging |
医疗包扎用隔离材料的相关术语 |
F1330-91(2001) |
Standard Guide for Metallic Abrasive Blasting to Descale the
Interior of Pipe |
金属研磨法除去管内氧化皮 |
F1331-91(2002) |
Standard Practice for Installation Procedures of Vinyl Deck
Coverings on Portable Plates in Electrical and Electronic Spaces |
电气和电子操作室中可移动板上乙烯铺面覆盖物的安装程序 |
F1332-99(2005) |
Standard Practice for Use of SI (Metric) Units in Maritime
Applications (Committee F25 Supplement to IEEE/ASTM SI 10) |
海运设施中国际单位制的使用(F-25委员会对E-380的补充)(米制) |
F1333-91(2002) |
Standard Specification for Construction of Fire and Foam Station
Cabinets |
消防和泡沫灭火站操纵室结构 |
F1334-02 |
Standard Test Method for Determining A-Weighted Sound Power
Level of Vacuum Cleaners |
测定真空吸尘器噪声能量级别的试验方法 |
F1335-04 |
Standard Specification for Pressure-Rated Composite Pipe and
Fittings for Elevated Temperature Service |
高温设备用标定压力复合管道及其配件 |
F1336-02 |
Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed
Sewer Fittings |
聚氯乙烯(PVC)装密封垫的下水道管件 |
F1337-91(2001) |
Standard Practice for Human Engineering Program Requirements for
Ships and Marine Systems, Equipment, and Facilities |
海船和海洋系统、设备用人体工效要求 |
F1338-91(2002) |
Standard Guide for Main Propulsion Medium Speed Marine Diesel
Engines Covering Performance and Minimum Scope of Assembly |
船用主动力中速柴油发动机覆盖性能和机组最小工作范围 |
F1339-92(2003) |
Standard Guide for Organization and Operation of Emergency
Medical Services Systems |
急救医疗服务系统的组织和运作 |
F1341-99 |
Standard Specification for Unalloyed Titanium Wire UNS R50250,
UNS R50400, UNS R50550, UNS R50700, for Surgical Implant Applications |
外科植入应用的非金属钛丝的标准规范 |
F1342-05 |
Standard Test Method for Protective Clothing Material Resistance
to Puncture |
防护服装耐穿刺能力的测试方法 |
F1343-02 |
Standard Specification for Anesthetic Gas Scavenging
Systems-Transfer and Receiving Systems |
麻醉气体净化系统-输送及接收系统规范 |
F1344-04 |
Standard Specification for Rubber Floor Tile |
橡胶地板砖 |
F1345-96(2003) |
Standard Specification for Zinc-5% Aluminum-Mischmetal
Alloy-Coated Steel Chain-Link Fence Fabric |
锌-5%铝-铈合金涂覆钢连接链环栏栅结构 |
F1346-91(2003) |
Standard Performance Specification for Safety Covers and
Labeling Requirements for All Covers for Swimming Pools, Spas and Hot
Tubs |
游泳池、温泉和热浴池用安全覆盖物和标记要求的性能规范 |
F1347-91(2001) |
Standard Specification for Manually Operated Fueling Hose
Reels |
手工操作的加燃料软管卷盘 |
F1348/F1348M-91(2002) |
Standard Specification for Pneumatic Rotary Descaling
Machines |
气动旋转式去氧化皮机械 |
F1349-98(2003) |
Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing
Extractables from Microwave Susceptors |
从微波传感器中提取的非挥发紫外线(UV)吸收可萃取物的测试方法 |
F1350-02 |
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5
Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673) |
不锈钢外科固定用线 |
F1351-96(2002) |
Standard Practice for Determination of the Effect of Hard
Creasing Paper on Images Produced by Business Imaging Systems |
测定硬皱纹纸对商用影象系统影象产品的影响 |
F1352-02 |
Standard Guide for Fixed Blade Broadhead Performance and Safety
Standards |
粗大铁箭头的性能和安全标准 |
F1355-06 |
Standard Guide for Irradiation of Fresh Agricultural Produce as
a Phytosanitary Treatment |
新鲜水果检疫处理.照射灭虫法 |
F1356-99 |
Standard Guide for the Irradiation of Fresh and Frozen Red Meat
and Poultry to Control Pathogens and Other Microorganisms |
新鲜和冷冻瘦肉与家禽(控制病原体) |
F1357-99(2004) |
Standard Specification for Articulating Total Wrist Implants |
连接整个腕关节的植入物 |
F1358-00(2005) |
Standard Test Method for Effects of Flame Impingement on
Materials Used in Protective Clothing Not Designated Primarily for Flame
Resistance |
主要不是用于耐火的防护服用材料遇火效应的标准试验方法 |
F1359-99a(2004) |
Standard Test Method for Liquid Penetration Resistance of
Protective Clothing or Protective Ensembles Under a Shower Spray While on
a Mannequin |
测定化学防护服或女子全套服装在静态下液密完整性的标准惯例 |
F1360-06 |
Standard Specification for Ovens, Microwave, Electric |
电微波炉 |
F1361-05 |
Standard Test Method for Performance of Open Deep Fat Fryers |
深油炸锅性能的测试方法 |
F1362-97(2003) |
Standard Test Method for Shear Strength and Shear Modulus of
Aerospace Glazing Interlayer Materials |
航天工业用上釉叠层材料的剪切强度和剪切模数测试方法 |
F1363-02 |
Standard Guide for Reduction of Risk of Injury for Archery
Overdraws |
降低射箭运动员由于张拉过度而受伤的危险因素 |
F1364-03e1 |
Standard Practice for Use of a Calibration Device to Demonstrate
the Inspection Capability of an Interferometric Laser Imaging
Nondestructive Tire Inspection System |
使用校准设备验证干涉激光成象无损轮胎检验系统的检验能力 |
F1365-91(2005) |
Standard Test Method for Water Infiltration Resistance of
Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals |
使用挠性弹性密封材料的地下塑料水管接头耐水渗透性测试方法 |
F1367-98(2003) |
Standard Specification for Chromium Sputtering Targets for Thin
Film Applications |
薄膜设备用铬溅射极 |
F1370-92(2005) |
Standard Specification for Pressure-Reducing Valves for Water
Systems, Shipboard |
船上给水系统用减压阀 |
F1371-04 |
Standard Specification for Vegetable Peeling Machines,
Electric |
电动蔬菜剥皮机 |
F1372-93(2005) |
Standard Test Method for Scanning Electron Microscope (SEM)
Analysis of Metallic Surface Condition for Gas Distribution System
Components |
气体分配系统元部件用金属表面状态的扫描式电子显微镜(SEM)分析测试方法 |
F1373-93(2005) |
Standard Test Method for Determination of Cycle Life of
Automatic Valves for Gas Distribution System Components |
测定气体分配系统元部件用自动阀以循环次数表示的寿命的测试方法 |
F1374-92(2005) |
Standard Test Method for Ionic/Organic Extractables of Internal
Surfaces-IC/GC/FTIR for Gas Distribution System Components |
气体分配系统元部件内表面IC/GC/FTIR的离子/有机可提取物测试方法 |
F1375-92(2005) |
Standard Test Method for Energy Dispersive X-Ray Spectrometer
(EDX) Analysis of Metallic Surface Condition for Gas Distribution System
Components |
气体分配系统元部件用金属表面状态的能量分散X射线分光光谱分析试验法 |
F1376-92(2005) |
Standard Guide for Metallurgical Analysis for Gas Distribution
System Components |
气体分配系统元部件的金相分析 |
F1377-04 |
Standard Specification for Cobalt-28Chromium-6Molybdenum Powder
for Coating of Orthopedic Implants (UNS R30075) |
矫形外科植入物覆层用钴-铬-钼粉末 |
F1378-05 |
Standard Specification for Shoulder Prosthesis |
肩部修复术 |
F1379-95(2003) |
Standard Terminology Relating to Barbed Tape |
倒钩带术语 |
F1380-95a(2002)e1 |
Standard Specification for Metal Insert Fittings for
Polybutylene (PB) Tubing |
聚丁烯(PB)管用金属插入配件 |
F1381-92(2003) |
Standard Guide for Planning and Developing 9-1-1 Enhanced
Telephone Systems |
9-1-1增强型电话系统的设计和开发 |
F1383-99a |
Standard Test Method for Resistance of Protective Clothing
Materials to Permeation by Liquids or Gases Under Conditions of
Intermittent Contact |
间断接触条件下防护服装材料耐液体或气体渗透性的试验方法 |
F1385-01 |
Standard Practice for Platforms in Cargo Tanks |
载油舱的平台甲板 |
F1386-92(2004) |
Standard Guide for Construction of a Sounding Tube and Striker
Plate for Tank Sounding |
油罐测深用测深管和操作板的结构 |
F1387-99(2005) |
Standard Specification for Performance of Piping and Tubing
Mechanically Attached Fittings |
机械粘附上的配件的性能 |
F1394-92(2005) |
Standard Test Method for Determination of Particle Contribution
from Gas Distribution System Valves |
测定从气体分配系统阀门产生的粒子作用的测试方法 |
F1396-93(2005) |
Standard Test Method for Determination of Oxygen Contribution by
Gas Distribution System Components |
按气体分配系统成分测定氧作用的测试方法 |
F1397-93(2005) |
Standard Test Method for Determination of Moisture Contribution
by Gas Distribution System Components |
用气配系统组件时测定湿度作用的测试方法 |
F1398-93(2005) |
Standard Test Method for Determination of Total Hydrocarbon
Contribution by Gas Distribution System Components |
按气体分配系统成分测定总烃的测试方法 |
F1404-92(1999) |
Test Method for Crystallographic Perfection of Gallium Arsenide
by Molten Potassium Hydroxide (KOH) Etch Technique |
用熔融氢氧化钾腐蚀技术测试砷化镓结晶完整性的试验方法 |
F1405-98(2002) |
Standard Test Method for Determining the Dynamic Thermal
Response of Direct Thermal Imaging Products-Atlantek Method |
测定直接热成像产品的动态热敏感性的测试方法 |
F1407-99a(2006) |
Standard Test Method for Resistance of Chemical Protective
Clothing Materials to Liquid Permeation-Permeation Cup Method |
测定化学防护服装材料抗液体渗透性的测试方法.渗透杯法 |
F1408-97(2002)e1 |
Standard Practice for Subcutaneous Screening Test for Implant
Materials |
植入材料的皮下筛选试验 |
F1409-00(2005)e1 |
Standard Test Method for Straight Line Movement of Vacuum
Cleaners While Cleaning Carpets |
清洁地毯时吸尘器直线移动的试验方法 |
F1410-98(2006) |
Standard Test Method for Measuring Maximum Functional Wet Volume
of Utility Vacuum Cleaners |
测量通用真空吸尘器最大功能湿容积的测试方法 |
F1411-01(2006) |
Standard Practice for Presenting Selected Information on Vacuum
Cleaners for Consumer Use |
为用户提供选择真空吸尘器的信息 |
F1412-01e1 |
Standard Specification for Polyolefin Pipe and Fittings for
Corrosive Waste Drainage Systems |
腐蚀废物的下水道系统用聚烯烃管和配件 |
F1413-92(1999) |
Standard Guide for Oil Spill Dispersant Application Equipment:
Boom and Nozzle Systems |
漏油分散设备:起重臂和喷油嘴系统 |
F1414-04 |
Standard Test Method for Measurement of Cut Resistance to Chain
Saw in Lower Body (Legs) Protective Clothing |
测量矮身材者(短腿)穿防护服装耐链锯切割性的测试方法 |
F1416-96(2003) |
Standard Guide for Selection of Time-Temperature Indicators |
时间-温度指示器的选择 |
F1417-92(2005) |
Standard Test Method for Installation Acceptance of Plastic
Gravity Sewer Lines Using Low-Pressure Air |
使用低压空气对塑料自流排水管道安装验收方法 |
F1418-01 |
Standard Guide for Training the Emergency Medical Technician
(Basic) in Roles and Responsibilities |
急救医疗基本技术人员的作用和可靠性培训 |
F1420-01 |
Standard Guide for Training the Emergency Medical Technician
(Basic) to Perform Patient Management Techniques |
急救医疗基本技术人员控制冲击作用的培训 |
F1421-01 |
Standard Guide for Training the Emergency Medical Technician
(Basic) To Manage Obstetrical Emergencies |
急救医疗基本技术人员控制临产危险的培训 |
F1422-92(1999) |
Standard Guide for Using the Incident Command System Framework
in Managing Civilian Search and Rescue Operations |
管理民用搜索和救护工作中事故命令系统结构的应用 |
F1423-97(2002)e1 |
Standard Practice for Determination of the Quality of Monochrome
Images Produced from Non-Impact Personal Computer Printers |
非击打式个人电脑(PC)打印机打印的单色图象质量检测的标准惯例 |
F1424-92(2006) |
Standard Test Method for Estimating Toner Usage in Full-Color
Copiers Utilizing Dry Mono- or Dual-Component Toners |
在全色复制器中利用单或双成分干调色剂评定调色剂使用法的测试 |
F1425-06 |
Standard Test Method for Determining the Tribocharge of
Two-Component Developer Materials |
两成分显影材料摩擦电荷测定的标准试验方法 |
F1426-94(2003) |
Standard Practice for Identifying Tire Tread Surface Irregular
Wear Patterns Resulting from Tire Use |
疲劳使用引起的疲劳外胎表面不规则磨损花纹的鉴别 |
F1427-06 |
Standard Consumer Safety Specification for Bunk Beds |
床铺使用安全规范 |
F1428-92(2005) |
Standard Specification for Aluminum Particle-Filled
Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for
Fasteners |
紧固件用非有机顶涂层,防腐蚀涂层的铝颗粒填充底涂层/有机物 |
F1429-99(2005) |
Standard Test Method for Assembly Force of Plastic Underground
Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell |
使用装在承接口中的柔软性弹性密封件塑料地下管道连接件装配力的测试方法 |
F1430-03e1 |
Standard Test Method for Acoustic Emission Testing of Insulated
and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling
Attachments |
有补充荷载卸除附件的个人用隔音装置的声音传播的测试方法 |
F1431-92(2004) |
Standard Specification for Water Trap for Diesel Exhaust |
柴油机排气阻水阀 |
F1433-97(2004) |
Standard Specification for Mechanically Refrigerated Shipboard
Air Conditioner |
机械致冷的空调器标准规范 |
F1434-97(2002) |
Standard Practice for Estimating the Performance of a Fuser Oil
in an Electrostatic Copier or Printer |
静电复印机和打印机中保险油性能评定 |
F1435-04 |
Standard Specification for Designation of the Balance Point
Location for Archery Arrows |
弓箭平衡点定位设计标准规范 |
F1436-02 |
Standard Guide for Center Serving Diameter Dimensions for
Archery Bow Strings |
射箭弓弦中心被复直径尺寸 |
F1437-01 |
Standard Practice for Inclined Cargo Tank Ladders |
倾斜的货运槽罐梯子 |
F1438-93(2005) |
Standard Test Method for Determination of Surface Roughness by
Scanning Tunneling Microscopy for Gas Distribution System Components |
用扫描隧道显微术法测定气体分配系统元件的表面粗糙度的测试方法 |
F1439-03 |
Standard Guide for Performance of Lifetime Bioassay for the
Tumorigenic Potential of Implant Materials |
外科植入物引起潜在致瘤的寿命生物检测的实施 |
F1440-92(2002) |
Standard Practice for Cyclic Fatigue Testing of Metallic Stemmed
Hip Arthroplasty Femoral Components Without Torsion |
无扭转装有金属杆的髋关节成型术股骨部件的循环疲劳检验 |
F1441-03 |
Standard Specification for Soft-Tissue Expander Devices |
人体软组织扩张器具 |
F1442-92(2003) |
Standard Practice for Using a Copier or Printer as a Test
Instrument for Evaluating Paper Performance |
作为评定纸功能的复印机和打印机的检验仪器使用 |
F1443-93(2003) |
Standard Practice for Using 0.008-in. (0.203-mm) Aperture
Reflectometers as Test Instruments for Measuring Visual Image Quality of
Business Copy Images |
作为测量商业拷贝影像视频成像质量检验仪器使用的0.008-in,(0.203mm)孔反光白度计 |
F1444-00(2004) |
Standard Test Method for Determining Dynamic Thermal Response of
Direct Thermal Paper-Label Printer Method |
用直接传热纸标签印刷机法测定动态热敏感性的方法 |
F1445-00(2004) |
Standard Test Method for Determining Static Thermal Sensitivity
of Direct Thermal Paper |
测量直热纸静热灵敏度的测试方法 |
F1446-06 |
Standard Test Methods for Equipment and Procedures Used in
Evaluating the Performance Characteristics of Protective Headgear |
评定安全防护帽功能特性用设备和程序的试验方法 |
F1447-06 |
Standard Specification for Helmets Used in Recreational
Bicycling or Roller Skating |
骑自行车用防护帽 |
F1448-93a(2006) |
Standard Guide for Selection of Security Technology for
Protection Against Counterfeiting, Alteration, Diversion, Duplication,
Simulation, and Substitution (CADDSS) of Products or Documents |
保护产品和文献的假冒,改造,变更,重复,伪装和替换的保密技术的选择 |
F1449-01 |
Standard Guide for Care and Maintenance of Flame, Thermally and
Arc Resistant Clothing |
耐燃烧和热防护服装的维护和维修 |
F1450-05 |
Standard Test Methods for Hollow Metal Swinging Door Assemblies
for Detention Facilities |
滞留设备用空心金属转动门组合件的测试方法 |
F1453-92(2003) |
Standard Guide for Training and Evaluation of First Responders
Who Provide Emergency Medical Care |
提供急救医疗护理的急救人员的评定和培训 |
F1454-99(2003) |
Standard Practice for Comparing Correctable Film Ribbons |
可改正的薄膜色带比较的标准规范 |
F1455-92(2001) |
Standard Guide for Selection of Structural Details for Ship
Construction |
造船用结构部件选择的标准导则 |
F1457-94b(2006) |
Standard Termninology Relating to Laser Printers |
与激光打印机相关的术语 |
F1458-04 |
Standard Test Method for Measurement of Cut Resistance to Chain
Saw of Foot Protective Devices |
脚保护装置抗链锯割伤性能测量的标准试验方法 |
F1459-06 |
Standard Test Method for Determination of the Susceptibility of
Metallic Materials to Hydrogen Gas Embrittlement (HGE) |
测定金属材料对气体氢脆化灵敏度的方法 |
F1460-93(1999) |
Standard Practice for Calibrating Oil Spill Dispersant
Application Equipment Boom and Nozzle Systems |
溢油分散剂喷洒设备喷杆和喷嘴系统校准的标准规范 |
F1461-93(2005)e1 |
Standard Practice for Chemical Protective Clothing Program |
化工防护服的设计 |
F1464-93(2005) |
Standard Specification for Oxygen Concentrators for Domiciliary
Use |
家用氧浓缩器 |
F1465-03 |
Standard Guide for Selection of Security Control Systems |
第三部分安全监控系统.限定操作系统接口 |
F1466-99(2005) |
Standard Specification for Iron-Nickel-Cobalt Alloys for
Metal-to-Ceramic Sealing Applications |
金属与陶瓷密封用铁镍钴合金 |
F1467-99(2005) |
Standard Guide for Use of an X-Ray Tester ([approximate]10 keV
Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices
and Microcircuits |
微电子装置的电离辐射效应试验中X射线测试仪(近似等于10keV辐射量子)的使用 |
F1468-04a |
Standard Practice for Evaluation of Metallic Weapons Detectors
for Controlled Access Search and Screening |
控制进入搜索和筛选用金属武器检测器的评定 |
F1469-99(2004) |
Standard Guide for Conducting a Repeatability and
Reproducibility Study on Test Equipment for Nondestructive Testing |
无损检验用测试设备运行的重复性和再生性研究的实施 |
F1470-02 |
Standard Guide for Fastener Sampling for Specified Mechanical
Properties and Performance Inspection |
特定的机械性能和功能检测用紧固件的抽样 |
F1471-93(2001) |
Standard Test Method for Air Cleaning Performance of a
High-Efficiency Particulate Air- Filter System |
高效粒子空气过滤器系统空气净化功能的试验方法 |
F1472-02a |
Standard Specification for Wrought Titanium -6Aluminum
-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
外科植入物用煅制钛-6铝-4钒合金 |
F1473-01e1 |
Standard Test Method for Notch Tensile Test to Measure the
Resistance to Slow Crack Growth of Polyethylene Pipes and Resins |
测量聚乙烯管和树脂抗裂缝缓慢扩展的切口拉伸试验用标准试验方法 |
F1476-01 |
Standard Specification for Performance of Gasketed Mechanical
Couplings for Use in Piping Applications |
管道用装衬垫的机械连接器的性能 |
F1478-06 |
Standard Test Method for Determination of Abrasion Resistance of
Images Produced from Copiers and Printers (Taber Method) |
测定复印机和打印机印制图像耐磨性的标准测试方法(泰伯法) |
F1479-98(2003) |
Standard Terminology Relating to Microwave Food Packaging |
与微波食品包装相关的术语 |
F1481-94(2001) |
Standard Guide for Ecological Considerations for the Use of
Bioremediation in Oil Spill Response-Sand and Gravel Beaches |
油溢流反应中使用生物药剂的生态考虑.砂及砾石滩 |
F1482-04 |
Standard Practice for Installation and Preparation of Panel Type
Underlayments to Receive Resilient Flooring |
用在弹性楼板下面的木制垫层产品标准导则 |
F1483-05 |
Standard Specification for Oriented Poly(Vinyl Chloride), PVCO,
Pressure Pipe |
定向聚氯乙烯(PVCO)压力管路标准规范 |
F1484-05 |
Standard Test Methods for Performance of Steam Cookers |
蒸汽锅性能的标准试验方法 |
F1486-96(2002) |
Standard Practice for Determination of Abrasion and Smudge
Resistance of Images Produced from Office Products (GA-CAT Method) |
办公产品中图像产品耐磨性和抗污性测定标准规程(GA-CAT法) |
F1487-05 |
Standard Consumer Safety Performance Specification for
Playground Equipment for Public Use |
大众游乐场设备标准消费品的安全性能规范 |
F1488-03 |
Standard Specification for Coextruded Composite Pipe |
双金属挤压合成材料管标准规范 |
F1490-04a |
Standard Terminology Relating to Search and Rescue |
搜寻和营救的相关标准术语 |
F1491-93(2002) |
Standard Specification for An Avalanche Beacon Frequency |
雪崩信号频率标准规范 |
F1492-00 |
Standard Specifications for Helmets Used in Skateboarding and
Trick Roller Skating |
滑雪板用防护头盔的标准规范 |
F1493-93(2003) |
Standard Guide for Financing and Financial Accountability of
Medical Transportation Systems |
医疗传输系统的财政和财务会计责任标准导则 |
F1494-03 |
Standard Terminology Relating to Protective Clothing |
防护服标准术语 |
F1495-05 |
Standard Specification for Combination Oven Electric or Gas
Fired |
两用电烘炉标准规范 |
F1496-99(2005) |
Standard Test Method for Performance of Convection Ovens |
对流式烘炉性能标准试验方法 |
F1497-99a |
Standard Test Method for Determining Laser Resistance of the
Shaft of Tracheal Tubes |
导管轴耐激光性能测定的标准试验方法 |
F1498-00e1 |
Standard Specification for Taper Pipe Threads 60° for
Thermoplastic Pipe and Fittings |
热塑性塑料管及配件用60°锥形管螺纹标准规范 |
F1499-01 |
Standard Specification for Coextruded Composite Drain, Waste,
and Vent Pipe (DWV) |
共挤制复合排水、排污、排气管(DWV)的标准规范 |
F1500-98(2003) |
Standard Test Method for Quantitating Non-UV-Absorbing
Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as
Food Simulants |
利用溶剂作为食品模拟物定性测定微波感受器中非紫外线吸收非挥发萃取物的标准试验方法 |
F1502-05e1 |
Standard Test Method for Static Measurements on Tires for
Passenger Cars, Light Trucks, and Medium Duty Vehicles |
轿车、轻型载重车和中型车辆轮胎静态测量的标准试验方法 |
F1503-02 |
Practice for Machine/Process Capability Study Procedure |
机器/过程潜在研究方法标准规范 |
F1504-02 |
Standard Specification for Folded Poly(Vinyl Chloride) (PVC)
Pipe for Existing Sewer and Conduit Rehabilitation |
现有污水管和下水管修复用波纹聚氯乙烯管的标准规范 |
F1505-01 |
Standard Specification for Insulated and Insulating Hand
Tools |
绝缘手工工具标准规范 |
F1506-02ae1 |
Standard Performance Specification for Flame Resistant Textile
Materials for Wearing Apparel for Use by Electrical Workers Exposed to
Momentary Electric Arc and Related Thermal Hazards |
暴露于电弧和有关热危害的电工用耐磨服装纺织材料的标准性能规范 |
F1507-99(2006) |
Standard Specification for Surge Suppressors for Shipboard
Use |
船用电涌抑制器标准规范 |
F1508-96(2004) |
Standard Specification for Angle Style, Pressure Relief Valves
for Steam, Gas and Liquid Services |
用于蒸汽、气体和液体设备的角型减压阀标准规范 |
F1509-94(2004) |
Standard Test Methods for Determining Acceptability of Ribbon
Welds in Fabric Cartridges |
织带盒色带接头合格性测定的标准试验方法 |
F1510-01 |
Standard Specification for Rotary Positive Displacement Pumps,
Commercial Ships Use |
商业船用旋转式排液泵标准规范 |
F1511-06 |
Standard Specification for Mechanical Seals for Shipboard Pump
Applications |
船用泵机械密封件的标准规范 |
F1512-94(2003) |
Standard Practice for Ultrasonic C-Scan Bond Evaluation of
Sputtering Target-Backing Plate Assemblies |
溅射目标垫板部件的超声波C扫描粘结评定标准规程 |
F1513-99(2003) |
Standard Specification for Pure Aluminum (Unalloyed) Source
Material for Electronic Thin Film Applications |
用于电子薄膜的纯铝(非合金)材料标准规范 |
F1514-03 |
Standard Test Method for Measuring Heat Stability of Resilient
Vinyl Flooring by Color Change |
用颜色变化测量弹性乙烯基塑料地板耐热性的标准试验方法 |
F1515-03 |
Standard Test Method for Measuring Light Stability of Resilient
Vinyl Flooring by Color Change |
用颜色变化来测量弹性乙烯地板光稳定性的标准试验方法 |
F1516-03 |
Standard Practice for Sealing Seams of Resilient Flooring
Products by the Heat Weld Method (when Recommended) |
用热焊接法(推荐的)密封弹性地板产品接缝的标准规范 1 |
F1517-94(2002) |
Standard Guide for Scope of Performance of Emergency Medical
Services Ambulance Operations |
医用急救车工作性能范围标准导则 |
F1518-00 |
Standard Practice for Cleaning and Disinfection of Flexible
Fiberoptic and Video Endoscopes Used in the Examination of the Hollow
Viscera |
检查内脏(肠)用挠性光纤和电视内窥镜的清洗和消毒标准实用规程 |
F1519-98(2003) |
Standard Test Method for Qualitative Analysis of Volatile
Extractables in Microwave Susceptors Used to Heat Food Products |
加热食品用的微波感受器挥发性萃取物定性分析标准试验方法 |
F1520-94(2003) |
Standard Test Method for Determining the Drive Torque for Film
and Fabric Ribbon Cartridges |
胶片暗盒和织带盒传动转矩测定的标准试验方法 |
F1521-03 |
Standard Test Methods for Performance of Range Tops |
炉灶轻油性能标准试验方法 |
F1522-95(2001) |
Standard Guide for Use of the Steam Stripping Process in
Mitigating Chemical Spills |
使用蒸汽洗提工艺减少化学溢流的标准导则 |
F1523-94(2001) |
Standard Guide for Selection of Booms in Accordance With Water
Body Classifications |
按照水体分类选择水栅的标准导则 |
F1524-95(2001) |
Standard Guide for Use of Advanced Oxidation Process for the
Mitigation of Chemical Spills |
使用先进的氧化工艺减少化学溢流的标准导则 |
F1525-96(2001) |
Standard Guide for Use of Membrane Technology in Mitigating
Hazardous Chemical Spills |
减少危险化学物质泄漏中薄膜技术的使用标准导则 |
F1533-01 |
Standard Specification for Deformed Polyethylene (PE) Liner |
变形的聚乙烯内衬标准规范 |
F1534-05 |
Standard Test Method for Determining Changes in
Fire-Test-Response Characteristics of Cushioning Materials After Water
Leaching |
衬垫材料水淋洗后燃烧试验响应特性变化测定的标准试验方法 |
F1536-95(2005) |
Standard Test Method for Determining Strength and Setting Time
of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting
Tape |
水激活合成聚氨酯玻璃纤维矫型铸带强度和凝固时间测定的标准试验方法 |
F1537-00 |
Standard Specification for Wrought
Cobalt-28-Chromium-6-Molybdenum Alloy for Surgical Implants (UNS R31537,
UNS R31538, and UNS R31539) |
外科植入用煅制钴铬钼合金标准规范 |
F1538-03 |
Standard Specification for Glass and Glass Ceramic Biomaterials
for Implantation |
植入用玻璃和玻璃陶瓷生物材料标准规范 |
F1541-02 |
Standard Specification and Test Methods for External Skeletal
Fixation Devices |
骨骼外部固定器标准分类 |
F1542-94(2000) |
Standard Specification for the Requirements and Disclosure of
Self-Closing Aneurysm Clips |
对自动闭合式动脉瘤夹钳要求和提出的标准规范 |
F1543-96(2002)e1 |
Standard Specification for Shock Attenuation Properties of
Fencing Surfaces |
护栏表面减震特性标准规范 |
F1544-04 |
Standard Specification for Determining the Rating Velocities of
an Archery Bow |
射箭用弓额定速度测定的标准规范 |
F1545-97(2003) |
Standard Specification for Plastic-Lined Ferrous Metal Pipe,
Fittings, and Flanges |
有塑料内衬的铁合金管、配件和法兰的标准规范 |
F1546/F1546M-96(2001) |
Standard Specification for Fire Hose Nozzles |
消防水龙头连接头的标准规范 |
F1547-06 |
Standard Guide for Listing Relevant Standards and Publications
for Commercial Shipbuilding |
商业造船的相关标准发布和出版的标准导则 |
F1548-01 |
Standard Specification for the Performance of Fittings for Use
with Gasketed Mechanical Couplings Used in Piping Applications |
用于管道连接的填实机械联结器配件性能标准规范 |
F1549-94(2005) |
Standard Terminology Relating to Underwater Search, Rescue, and
Recovery Activities |
水下搜索、营救和恢复作业标准术语 |
F1550-05 |
Test Method for Determination of Fire-Test-Response
Characteristics of Components or Composites of Mattresses or Furniture for
Use in Correctional Facilities after Exposure to Vandalism, by Employing a
Bench Scale Oxygen Consumption Calori |
使用实验规模耗氧热量计测定床垫或家具遭破坏后修复用部件或合成材料燃烧试验响应特性测定的标准试验方法 |
F1551-03 |
Standard Test Methods for Comprehensive Characterization of
Synthetic Turf Playing Surfaces and Materials |
合成草地使用表面和材料综合特性的标准测试方法 |
F1552-94(2002) |
Standard Practice for Training Instructor Qualification and
Certification Eligibility of Emergency Medical Dispatchers |
急救医疗调度员的培训教师资格和鉴定合格标准规程 |
F1553-06 |
Standard Guide for Specifying Chain Link Fence |
专用链接栅栏的标准导则 |
F1554-04 |
Standard Specification for Anchor Bolts, Steel, 36, 55, and
105-ksi Yield Strength |
36、55和105ksi生产强度的锚栓标准规范 |
F1555-94(2002) |
Standard Guide for Characteristics for Extremity Splints |
末端夹板特性的标准导则 |
F1556-94(2002) |
Standard Guide for Spinal Immobilization and Extrication
(Spined) Device Characteristics |
脊柱固定和脱离器件特性用标准导则 |
F1557-94(2002) |
Standard Guide for Full Body Spinal Immobilization Devices
(FBSID) Characteristics |
全身脊柱固定器件特性用标准导则 |
F1558-94(2002) |
Standard Guide for Characteristics for Adjunct Cervical Spine
Immobilization Devices (ACSID) |
辅助颈椎固定装置(ACSID)的特性标准导则 |
F1559-94(2002) |
Standard Guide for Characteristics for Cervical Spine
Immobilization Collar(s) (CSIC) |
辅助颈椎固定轴环(CSIC)的特性标准导则 |
F1560-00(2006) |
Standard Practice for Emergency Medical Dispatch Management |
医疗紧急调度管理标准规范 |
F1561-03 |
Standard Performance Requirements for Plastic Chairs for Outdoor
Use |
户外用塑料椅子标准性能要求 |
F1562-95(2005) |
Standard Guide for Use-Oriented Foreign Language Instruction |
面向用户的外语说明书标准导则 |
F1563-01 |
Standard Specification for Tools to Squeeze-off Polyethylene
(PE) Gas Pipe or Tubing |
聚乙烯(PE)气体管道或管子挤压工具标准规范 |
F1564-95(2000) |
Standard Specification for Structure-Mounted Insulating Work
Platforms for Electrical Workers |
电工用结构安装绝缘工作台标准规范 |
F1565-00(2006) |
Standard Specification for Pressure-Reducing Valves for Steam
Service |
蒸气设备用减压阀标准规范 |
F1566-99(2004) |
Standard Test Methods for Evaluation of Innersprings and
Boxsprings |
内弹簧和箱型弹簧评定的标准试验方法 |
F1567-94(2001) |
Standard Specification for Fabricated or Cast Automatic
Self-Cleaning, Fuel Oil and Lubricating Oil Strainers |
制造的或铸造的自动清洗燃料油和润滑油过滤器标准规范 |
F1568-03 |
Standard Specification for Food Processors, Electric |
电动食品加工器标准规范 |
F1570-01e1 |
Standard Test Method for Determining the Tactile Ratio of a
Membrane Switch |
薄膜开关触觉比率测定标准试验方法 |
F1571-95(2002) |
Standard Test Method for Determination of Abrasion and Smudge
Resistance of Images Produced from Business Copy Products (Sutherland
Method) |
由办公复制品产生的图象抗磨抗污性能测定的标准试验方法(萨瑟兰法) |
F1572-99(2005) |
Standard Test Methods for Tire Performance Testing on Snow and
Ice Surfaces |
冰雪表面轮胎试验的标准试验方法 |
F1573-95(2000) |
Standard Specification for Anesthetic Equipment-Oropharyngeal
and Nasopharyngeal Airways |
麻醉设备标准规范-----口腔咽喉和鼻咽道 |
F1574-03a |
Standard Test Method for Compressive Strength of Gaskets at
Elevated Temperatures |
高温下密封衬垫抗压强度的试验方法 |
F1575-03 |
Standard Test Method for Determining Bending Yield Moment of
Nails |
钉子屈服弯矩测定的标准试验方法 |
F1577-05 |
Standard Test Methods for Detention Locks for Swinging Doors |
推拉门卡锁标准试验方法 |
F1578-01 |
Standard Practice for Contact Closure Cycling of a Membrane
Switch |
薄膜开关接触闭合回路的标准规程 |
F1579-02e1 |
Standard Specification for Polyaryletherketone (PAEK) Polymers
for Surgical Implant Applications |
外科植入用复芳基酮醚(PAEK)树脂标准规范 |
F1580-01 |
Standard Specification for Titanium and Titanium-6 Aluminum-4
Vanadium Alloy Powders for Coatings of Surgical Implants |
外科植入物涂敷用钛及钛-6%铝-4%钒合金粉末的标准规范 |
F1581-99 |
Standard Specification for Composition of Anorganic Bone for
Surgical Implants |
外科植入用无机骨料成分标准规范 |
F1582-98(2003) |
Standard Terminology Relating to Spinal Implants |
脊椎骨植入物标准术语 |
F1583-95(2006) |
Standard Practice for Communications Procedures-Phonetics |
通信程序标准规范------语音学 |
F1584-95(2003) |
Standard Practice for Marking Buildings During Disaster Search
Operations |
事故查找过程中建筑物标志标准实用规程 |
F1586-02 |
Standard Specification for Wrought Nitrogen Strengthened 21
Chromium—10 Nickel—3 Manganese—2.5 Molybdenum Stainless Steel Bar for
Surgical Implants (UNS S31675) |
外科植入物用煅制氮加强铬-镍-锰-钼不锈钢棒 |
F1587-99(2005) |
Standard Specification for Head and Face Protective Equipment
for Ice Hockey Goaltenders |
冰上曲棍球守门员用头、脸保护设备标准规范 |
F1588-96(2002) |
Standard Test Method for Constant Tensile Load Joint Test
(CTLJT) |
恒定拉伸载荷连接试验的标准试验方法 |
F1591-95(2006) |
Standard Practice for Visual Signals Between Persons on the
Ground and in Aircraft During Ground Emergencies |
地面发生紧急情况时地勤人员与飞行器中人员之间可视信号的标准规范 |
F1592-05 |
Standard Test Methods for Detention Hollow Metal Vision
Systems |
拘留用空心金属可见系统标准试验方法 |
F1593-97(2002) |
Standard Test Method for Trace Metallic Impurities in Electronic
Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer |
应用高质量分辩率辉光放电质谱计测定电子级铝中微量金属杂质的标准试验方法 |
F1594-95(2003) |
Standard Specification for Pure Aluminum (Unalloyed) Source
Material for Vacuum Coating Applications |
真空镀膜用纯铝(未掺杂质)原材料标准规范 |
F1595-00(2005) |
Standard Practice for Viewing Conditions for Visual Inspection
of Membrane Switches |
薄膜开关目测检验时观测条件的标准实用规程 |
F1596-00(2005) |
Standard Practice for Exposure of Membrane Switches to
Temperature and Relative Humidity |
温度和相对湿度对薄膜开关影响的标准实用规程 |
F1597-02 |
Standard Test Method for Determining the Actuation Force and
Contact Force of a Membrane Switch |
薄膜开关驱动力和接触力测定标准试验方法 |
F1598-95(2002) |
Standard Test Method for Determining the Effects of
Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test
Method) |
测定化学溶剂对薄膜开关图形重叠影响的标准试验方法(逐点试验法) |
F1599-95(2003) |
Standard Guide for Collecting Performance Data on Temporary
Storage Devices |
临时存储器件性能数据收集的标准导则 |
F1600-95a(2001) |
Standard Terminology Relating to Bioremediation |
生物治疗标准术语 |
F1601-01(2006) |
Standard Test Method for Motor Life Evaluation of an Electric
Motorized Nozzle for Central Vacuum Cleaning Systems |
中央真空除尘系统用电动排气管的发动机寿命评估标准试验方法 |
F1602-95(2001) |
Standard Specification for Kettles, Steam-Jacketed, 20 to 200
gal (75.7 to 757 L), Floor or Wall Mounted, Direct Connected, Gas Fired
and Electric Fired |
燃气和电动、直接连接、装在地板或墙上,20~200 加仑(75.7~757升)气套式水锅标准规范 |
F1603-95(2001) |
Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20
gal (1 to 75.7 L), Tilting, Table Mounted, Direct Connected, Gas Fired and
Electric Fired |
燃气和电动、直接连接、装在桌子上,可倾倒的32盎司~20 加仑(1~75.7升)汽套式水锅标准规范 |
F1604-02 |
Standard Specification for Freezers, Ice Cream, Soft Serve,
Shake |
冰淇淋、软饮料、牛奶冰淇淋、饮料冷柜标准规范 |
F1605-95(2001)e1 |
Standard Test Method for Performance of Double-Sided Griddles |
双面烤炉性能的标准试验方法 |
F1606-05 |
Standard Practice for Rehabilitation of Existing Sewers and
Conduits with Deformed Polyethylene (PE) Liner |
带变形聚乙烯(PE)内衬的下水道和管道复原的标准实施规程 |
F1607-95(2003) |
Standard Guide for Reporting of Test Performance Data for Oil
Spill Response Pumps |
漏油响应泵试验性能数据报告的标准导则 |
F1608-00(2004) |
Standard Test Method for Microbial Ranking of Porous Packaging
Materials (Exposure Chamber Method) |
多孔包装材料的微生物分等标准试验方法(开放室法) |
F1609-03 |
Standard Specification for Calcium Phosphate Coatings for
Implantable Materials |
可植入材料用磷酸钙涂层标准规范 |
F1611-00(2004) |
Standard Specification for Intramedullary Reamers |
用于铰孔骨干骨料和相关仪器的髓固定装置(IMFDs)浆纱的标准术语 |
F1612-95(2005) |
Standard Practice for Cyclic Fatigue Testing of Metallic Stemmed
Hip Arthroplasty Femoral Components with Torsion |
有转矩的金属干臀部关节成形术股骨元件的循环疲劳试验标准规程 |
F1613-95(2002) |
Standard Specification for Surgical Tissue/Dressing/Pick-Up
Forceps (Thumb Type) |
外科用组织/敷料/检出钳标准规范(拇指型) |
F1614-99 |
Standard Test Method for Shock Attenuating Properties of
Materials Systems for Athletic Footwear |
运动鞋材料系统减震性能标准试验方法 |
F1615-95(2004) |
Standard Specification for Cautionary Labeling for Five-Gallon
Open-Head Plastic Containers |
灭火加仑顶端开口塑料容器告警用标志标准规范 |
F1616-95(2002) |
Standard Guide for Scope of Performance of First Responders Who
Practice in the Wilderness or Delayed or Prolonged Transport Settings |
在大量的或延误的或延长的运输环境下应荟器基本规程执行范围的标准导则 |
F1623-96(2002) |
Standard Terminology Relating to Thermal Imaging Products |
有关热成像制品的术语 |
F1624-06 |
Standard Test Method for Measurement of Hydrogen Embrittlement
Threshold in Steel by the Incremental Step Loading Technique |
用增长载荷技术测量钢中氢脆性的标准试验方法 |
F1625-00 |
Standard Specification and Test Method for Rear-Mounted Bicycle
Child Carriers |
儿童座椅安置在后面和前面的自行车的标准规范及试验方法 |
F1626-95(2006) |
Standard Practice for Preparing Shipboard Fire Control Plans |
船上防火控制准备的标准规范 |
F1628-95(2000) |
Standard Specification for Labeling and Marking of Cuffed and
Uncuffed Tracheal Tubes and Related Treatments Intended for Use During
Laser Surgery |
激光外科学用套箍和未套箍气管导管及有关治疗的标记和标志的标准规范 |
F1629-95(2002) |
Standard Guide for Establishing Operating Emergency Medical
Services and Management Information Systems, or Both |
建立外科手术的急救医疗服务和管理信息系统或二者同时建立的标准导则 |
F1632-03 |
Standard Test Method for Particle Size Analysis and Sand Shape
Grading of Golf Course Putting Green and Sports Field Rootzone Mixes |
高尔夫球场和运动场绿草根区混合料颗粒大小分析和沙形状分等的标准试验方法 |
F1633-97(2003) |
Standard Guide for Techniques in Land Search |
地面搜索技术导则 |
F1634-95(2000) |
Standard Practice for In-Vitro Environmental Conditioning of
Polymer Matrix Composite Materials and Implant Devices |
聚合物基体复合材料和植入装置的实验室条件下环境调节标准规程 |
F1635-04a |
Standard Test Method for in Vitro Degradation Testing of
Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical
Implants |
外科植入用聚合树脂和制造模件的实验室内降解试验的标准试验方法 |
F1637-02e1 |
Standard Practice for Safe Walking Surfaces |
安全行走表面的标准规程 |
F1638-95(2002) |
Standard Terminology for Surgical Tissue/Dressing/Pick-Up
Forceps (Thumb-Type) |
外科用纱/敷料/检出钳的标准术语(拇指型)术语 |
F1639-05 |
Standard Test Method for Performance of Combination Ovens |
联炉性能的标准试验方法 |
F1640-03 |
Standard Guide for Packaging Materials for Foods to Be
Irradiated |
被辐射食品的包装材料的标准导则 |
F1642-04 |
Standard Test Method for Glazing and Glazing Systems Subject to
Airblast Loadings |
气流荷载下的门窗玻璃和玻璃装配系统的标准试验方法 |
F1643-05 |
Standard Test Methods for Detention Sliding Door Locking Device
Assembly |
锁销式滑动门锁装置组件的标准试验方法 |
F1644-01 |
Standard Guide for Health and Safety Training of Oil Spill
Responders |
溢油应答人员的保健与安全培训标准指南 |
F1645-00(2005) |
Standard Test Method for Water Migration in Honeycomb Core
Materials |
蜂窝芯材料中水的移动特性的标准试验方法 |
F1646-05e1 |
Standard Terminology Relating to Safety and Traction for
Footwear |
有关鞋靴安全和附着力的标准术语 |
F1647-02a |
Standard Test Methods for Organic Matter Content of Putting
Green and Sports Turf Root Zone Mixes |
小型高尔夫球场用绿呢和运动草坪根层混合物有机物质含量的标准试验方法 |
F1648-95(2003) |
Standard Test Methods for Archery Bowstring Component-Serving
String Material |
射箭弓弦元件的标准试验方法.弓弦用材料 |
F1649-96(2003) |
Standard Test Methods for Evaluating Wet Braking Traction
Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock
Braking Systems |
评估装配有防抱死系统的运输工具上轿车轮胎的湿制动牵引性能的标准试验方法 |
F1650-98(2005) |
Standard Practice for Evaluating Tire Traction Performance Data
Under Varying Test Conditions |
试验条件改变的情况下轮胎牵引性能数据评定的标准规范 |
F1651-95(2002) |
Standard Guide for Training the Emergency Medical Technician
(Paramedic) |
培训紧急救护医师(伞降医师)的标准导则 |
F1652-95(2002) |
Standard Guide for Providing Essential Data Needed in Advance
for Prehospital Emergency Medical Services |
入院前急救服务中预先提供所需重要数据指南 |
F1653-95(2002) |
Standard Guide for Scope of Performance of Triage in Prehospital
Environment |
入院前治疗类选法的实行范围用标准导则 |
F1654-95(2002) |
Standard Guide for Training and Evaluation of Individuals Who
are Responsible for or Perform Triage in Prehospital Environment |
入院前治疗类选法实行或负责人的训练和评估标准导则 |
F1655-95(2002) |
Standard Guide for Training First Responders Who Practice in
Wilderness, Delayed, or Prolonged Transport Settings |
培训野外、延误或延长的交通中第一响应者的标准导则 |
F1656-01 |
Standard Guide for Health and Safety Training of Oil Spill
Responders in the United States |
美国溢油应答人员保健与安全培训标准指南 |
F1657-96(2002) |
Standard Practice for Emergency Joining of Booms with
Incompatible Connectors |
具有不相容连接器的吊杆的紧急连接标准规程 |
F1661-96(2002) |
Standard Test Method for Determining the Contact Bounce Time of
a Membrane Switch |
测定薄膜开关接触弹力的标准试验方法 |
F1662-04 |
Standard Test Method for Verifying the Specified Dielectric
Withstand Voltage and Determining the Dielectric Breakdown Voltage of a
Membrane Switch |
薄膜开关的不导电耐电压的确定的试验方法 |
F1663-95(2002) |
Standard Test Method for Determining the Capacitance of a
Membrane Switch |
测定薄膜开关电阻的标准试验方法 |
F1664-01 |
Standard Specification for Poly(Vinyl Chloride) (PVC)-Coated
Steel Tension Wire Used with Chain-Link Fence |
与链接栅栏一起使用的聚氯乙烯涂层拉伸钢丝的标准规范 |
F1665-01 |
Standard Specification for Poly(Vinyl Chloride) (PVC)and Other
Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link
Fence |
与链接栅栏一起使用的聚氯乙烯涂层刺钢丝的标准规范 |
F1667-05 |
Standard Specification for Driven Fasteners: Nails, Spikes, and
Staples |
楔入式紧固件标准规范:钉子、长钉和U形钉 |
F1668-96(2002) |
Standard Guide for Construction Procedures for Buried Plastic
Pipe |
埋地塑料管铺设程序的标准导则 |
F1669M-96(2002) |
Standard Specification for Insulation Monitors for Shipboard
Electrical Systems [Metric] |
船用电气系统用绝缘监视器标准规范(米制) |
F1670-03 |
Standard Test Method for Resistance of Materials Used in
Protective Clothing to Penetration by Synthetic Blood |
防护服使用的材料抗人造血液透过特性的标准试验方法 |
F1671-03 |
Standard Test Method for Resistance of Materials Used in
Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174
Bacteriophage Penetration as a Test System |
使用Φ-X174噬菌体穿透率的试验系统测试防护衣材料抗血液携带病原体穿透率的标准试验方法 |
F1672-95(2005) |
Standard Specification for Resurfacing Patellar Prosthesis |
膝的假肢翻修技术规范 |
F1673-04 |
Standard Specification for Polyvinylidene Fluoride (PVDF)
Corrosive Waste Drainage Systems |
聚偏氟乙烯(PVDF)腐蚀废物排放系统的标准规范 |
F1674-05 |
Standard Test Method for Joint Restraint Products for Use with
PVC Pipe |
联接PVC管用的减震装置的标准试验方法 |
F1675-03 |
Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe
Used for Culverts, Storm Sewers, and Other Buried Conduits |
涵管,雨水管和其他埋设导管用塑料管的使用寿命成本分析标准规程 |
F1676-96(2003) |
Standard Specification for Basic Tumbling Mats |
基础翻转垫的标准规范 |
F1677-05 |
Standard Test Method for Using a Portable Inclineable
Articulated Strut Slip Tester (PIAST) |
使用便携式可倾斜铰链支杆滑动测试仪(PIAST)的标准试验方法 |
F1679-04e1 |
Standard Test Method for Using a Variable Incidence Tribometer
(VIT) |
使用可变倾角摩擦计(VIT)的标准测试方法 |
F1680-02 |
Standard Test Method for Determining Circuit Resistance of a
Membrane Switch |
测定薄膜开关线路阻抗的标准试验方法 |
F1681-96(2002) |
Standard Test Method for Determining Current Carrying Capacity
of a Conductor as Part of a Membrane Switch Circuit |
测定薄膜开关线路元件导体载流能力的标准试验方法 |
F1682-02 |
Standard Test Method for Determining Travel of a Membrane
Switch |
测定薄膜开关轮的标准试验方法 |
F1683-05e1 |
Standard Practice for Creasing or Bending a Membrane Switch,
Membrane Switch Flex Tail Assembly or Membrane Switch Component |
薄膜开关,薄膜开关引线组件和薄膜开关起折或弯曲的标准规程 |
F1684-06 |
Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt
Alloys for Low Thermal Expansion Applications |
低热膨胀用铁-镍和铁-镍-钴合金的标准规范 |
F1685-00(2006) |
Standard Specification for Pressure-Reducing Manifolds for Air
or Nitrogen Systems |
空气或氮气系统用减压进气管规范 |
F1686-97(2003) |
Standard Guide for Surveys to Document and Assess Oiling
Conditions on Shorelines |
对海岸上加油条件进行文件汇编和评估的勘测指南 |
F1687-97(2003) |
Standard Guide for Terminology and Indices to Describe Oiling
Conditions on Shorelines |
描述海岸线注油条件的目录和术语的标准导则 |
F1689-05 |
Standard Test Method for Determining the Insulation Resistance
of a Membrane Switch |
测定薄膜开关抗绝缘性的标准试验方法 |
F1690-96(2004) |
Standard Specification for Humidifiers for Medical Use—Part 1:
General Requirements for Active Humidification Systems |
医用加湿器的标准规范.第1部分:自动加湿系统的一般要求 |
F1692-01(2006) |
Standard Test Method for Life Evaluation of a Turbine-Powered
Nozzle for Household Central Vacuum Cleaning Systems |
家用吸尘器用电动涡轮机喷嘴寿命评定的标准方法 |
F1693-96(2003) |
Standard Guide for Consideration of Bioremediation as an Oil
Spill Response Method on Land |
作为陆地外溢石油回收的生物环境治理条件用标准导则 |
F1694-96(2004) |
Standard Guide for Composing Walkway Surface Evaluation and
Incident Report Forms for Slips, Stumbles, Trips and Falls |
组合人行道路面打滑,绊跌,断裂和下沉的事故报告格式与评定用标准导则 |
F1695-03e1 |
Standard Test Method for Performance of Underfired Broilers |
下加热式烤器性能的标准试验方法 |
F1696-96(2003) |
Standard Test Method for Energy Performance of Single-Rack Hot
Water Sanitizing, Door-Type Commerical Dishwashing Machines |
单架热水消毒的开门式商用洗碗机能耗性能试验方法 |
F1697-02 |
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile
Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing
Sewers and Conduits |
现用下水道和导管的机制螺旋形衬管修复用聚氯乙烯(PVC)异型钢带的标准规范 |
F1698-02 |
Standard Practice for Installation of Poly(Vinyl Chloride)(PVC)
Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing
Man-Entry Sewers and Conduits |
当人进入排污管和管道修复用聚氯乙烯轮廓条衬里和水泥薄浆的
安装标准规程 |
F1699-96(2001) |
Standard Classification for Passive Fiber Optic Seals |
无源光纤密封件的标准分类 |
F1700-04 |
Standard Specification for Solid Vinyl Floor Tile |
实心乙烯基楼板砖标准规范 |
F1701-05 |
Standard Specification for Unused Polypropylene Rope with
Special Electrical Properties |
具有特殊电气性能的新聚丙烯的标准规范 |
F1702-96(2002)e1 |
Standard Test Method for Measuring Shock-Attenuation
Characteristics of Natural Playing Surface Systems Using Lightweight
Portable Apparatus |
使用轻型便携式仪器测量普通活动桥面系统的冲击衰减特性标准试验方法 |
F1703-04 |
Standard Guide for Ice Hockey Playing Facilities |
冰球运动设施用标准导则 |
F1704-05 |
Standard Test Method for Capture and Containment Performance of
Commercial Kitchen Exhaust Ventilation Systems |
商用厨房通风系统性能用标准试验方法 |
F1705-96(2002) |
Standard Guide for Training Emergency Medical Services Ambulance
Operations |
紧急医疗救护服务操作训练用标准指南 |
F1706-96(2002) |
Standard Practice for Determining Energy Consumption of
Nonimpact Personal Computer Printers |
测定非击打式印刷机能量消耗的标准规程 |
F1707-96(2002) |
Standard Practice for Determining Energy Consumption of
Facsimile Machines |
测定传真机能量消耗的标准规程 |
F1709-97(2002) |
Standard Specification for High Purity Titanium Sputtering
Targets for Electronic Thin Film Applications |
电子薄膜用的高纯度钛溅射靶的技术规范 |
F1710-97(2002) |
Standard Test Method for Trace Metallic Impurities in Electronic
Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer |
使用高分辨率发光质谱仪测试电子级钛中痕量金属杂质的标准试验方法 |
F1711-96(2002) |
Standard Practice for Measuring Sheet Resistance of Thin Film
Conductors for Flat Panel Display Manufacturing Using a Four-Point
Probe |
使用四点探测法测定专业平板显示器用薄膜导线的薄膜电阻的标准规程 |
F1712-06 |
Standard Specification for Steel Chain-Link Fencing Materials
Used in Detention and Correctional Facilities |
拘留和教养设施用钢链节网材料的标准规范 |
F1713-03 |
Standard Specification for Wrought
Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications |
外科植入物用锻制钛-13铌-13锆合金的标准规范 |
F1714-96(2002) |
Standard Guide for Gravimetric Wear Assessment of Prosthetic
Hip-Designs in Simulator Devices |
模拟装置中修复设计的重力计磨损评估用标准导则 |
F1716-96(2002) |
Standard Guide for Transition and Performance of Marine Software
Systems Maintenance |
船用软件系统的性能和转换维护用标准导则 |
F1717-04 |
Standard Test Methods for Spinal Implant Constructs in a
Vertebrectomy Model |
Corpectomy 模型中脊骨植入结构的固定与疲劳特性的标准试验方法 |
F1718-01 |
Standard Specification for Rotary Positive Displacement
Distillate Fuel Pumps |
回转式变容燃油泵标准规范 |
F1719-96(2002) |
Standard Specification for Image-Interactive Stereotactic and
Localization Systems |
影像干扰的定向探测系统的标准规范 |
F1720-06 |
Standard Test Method for Measuring Thermal Insulation of
Sleeping Bags Using a Heated Manikin |
用加热人体模特测量睡袋保温性的标准试验方法 |
F1721-04 |
Standard Practices for Determining Stability of Direct Thermal
Imaging Products |
测定直热式图像制品稳定性的标准规程 |
F1722-96(2003) |
Standard Test Method for Determining Mass and Moment of Inertia
of Alpine Skis |
高山滑橇质量与惯性矩测定的标准试验方法 |
F1728-96(2001) |
Standard Practice for Multiple Persons Cold Water
Survival/Rescue Technique: Huddle Position |
多人冷水中生存/解救技术用标准规程:拥挤点 |
F1729-96(2001) |
Standard Practice for Single Person Cold Water Survival/Rescue
Technique: HELP Position |
个人冷水中生存/解救技术用标准规程:救助位置 |
F1730-96(2002) |
Standard Guide for Throwing a Water Rescue Throwbag |
水上救生投掷包的投掷用标准导则 |
F1731-96(2002) |
Standard Practice for Body Measurements and Sizing of Fire and
Rescue Services Uniforms and Other Thermal Hazard Protective Clothing |
消防和救援人员制服及其他隔热保护服装的人体测量与尺寸标注的标准规程 |
F1732-96(2005) |
Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and
Drain Pipe Containing Recycled PVC Material |
聚氯乙烯(PVC)污水管和排水管含再生PVC材料量规范 |
F1733-96(2002) |
Standard Specification for Butt Heat Fusion Polyamide(PA)
Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing |
聚酰胺塑料管用热熔接聚酰胺塑料配件的标准规范 |
F1734-03 |
Standard Practice for Qualification of a Combination of Squeeze
Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in
Polyethylene (PE) Gas Pipe |
为避免聚乙烯导气管长期受损用挤出工具、管和挤出工序组合的鉴定标准规程 |
F1735-02e1 |
Standard Specification for Poly (Vinyl Chloride) (PVC) Profile
Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and
Conduits |
修复带人孔管道的PVC衬底用聚氯乙烯(PVC)异型带材的标准规范 |
F1736-03 |
Standard Guide for Irradiation of Finfish and Aquatic
Invertebrates Used as Food to Control Pathogens and Spoilage
Microorganisms |
用辐照法控制鱼类和贝类病原体及有害微生物的标准导则 |
F1737-96(1999) |
Standard Guide for Use of Oil Spill Dispersant Application
Equipment During Spill Response: Boom and Nozzle Systems |
泄漏反应中使用油溢分散剂操作装置的标准导则:构架和喷管系统 |
F1738-96(1999) |
Standard Test Method for Determination of Deposition of Aerially
Applied Oil Spill Dispersants |
航空滑油漏油分散剂沉积物测定的标准试验方法 |
F1739-96(2002) |
Standard Guide for Performance of a Water Rescuer--Level 1 |
一级水上救援者作业标准导则 |
F1740-96(2002) |
Standard Guide for Inspection of Nylon, Polyester, or
Nylon/Polyester Blend, or Both Kernmantle Rope |
尼龙、聚酯或尼龙/聚酯混合或混合芯套绳检测的标准导则 |
F1741-05 |
Standard Practice for Installation of Machine Spiral Wound Poly
(Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers
and Conduits |
修理现有污水管和导管所用机制螺纹聚氯乙烯(PVC)衬管的安装标准惯例 |
F1742-03e1 |
Standard Specification for PVC Insulating Sheeting |
PVC绝缘薄板标准规范 |
F1743-96(2003) |
Standard Practice for Rehabilitation of Existing Pipelines and
Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting
Resin Pipe (CIPP) |
对现有硫化固定硫化热固树脂管牵入安装管线和管道修复的标准规程 |
F1744-96(2002)e1 |
Standard Guide for Care and Handling of Stainless Steel Surgical
Instruments |
不锈钢外科器械保养与维护标准导则 |
F1749-02 |
Standard Specification for Fitness Equipment and Fitness
Facility Safety Signage and Labels |
健身器材和健身设备安全标志和标签的规范 |
F1750-05 |
Specification for Paintball Marker Threaded-Propellant Source
Interface |
涂料丸枪加螺纹推进装置接口标准规范 |
F1752-96(2006) |
Standard Test Method for Archery Bow Component-Cord Material |
射箭弓弦用材料标准试验方法 |
F1753-96(2006) |
Standard Specification for Classification and Marking of
Single-Lens Scopes for Use with Archery Bows |
与箭弓一起使用的透镜测试器分类和标记的标准规范 |
F1754-97(2004) |
Standard Guide for Marine Vessel Structural Inspection
Considerations |
舰船结构检查依据指南 |
F1755M-96(2002) |
Standard Specification for Solid State Bargraph Meters for
Shipboard Use (Metric) |
舰船用固态条线图表技术规范 |
F1756-97a(2002) |
Standard Guide for Implementation of a Fleet Management System
Network |
集群管理系统网络设备指南 |
F1757-96(2002) |
Standard Guide for Digital Communication Protocols for
Computerized Systems |
计算机系统数字通信协议指南 |
F1758-05 |
Standard Test Methods for Detention Hinges Used on
Detention-Grade Swinging Doors |
延时等级摆动门用延时铰链的标准试验方法 |
F1759-97(2004) |
Standard Practice for Design of High-Density Polyethylene (HDPE)
Manholes for Subsurface Applications |
用于地下高密度聚乙烯(HDPE)检修孔设计标准惯例 |
F1760-01(2005)e1 |
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC)
Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content |
共挤聚氯乙烯无压塑料管技术规范 |
F1761-00(2005) |
Standard Test Method for Pass Through Flux of Circular Magnetic
Sputtering Targets |
圆形磁射极板磁力线通过的标准试验方法 |
F1762-02 |
Standard Practice for Exposing a Membrane Switch to Variation in
Atmospheric Pressure |
测定大气压力变化对薄膜开关影响的标准惯例 |
F1764-97(2002) |
Standard Guide for Selection of Hardline Communication Systems
for Confined-Space Rescue |
有限空间救援用硬线通讯系统选择方法的标准导则 |
F1765-97a(2002) |
Standard Guide for Ice Staff Self-Rescue Technique |
冰杖自救技术标准导则 |
F1766-97a(2002) |
Standard Guide for Ice Awis Self-Rescue Technique |
冰凿自救技术标准导则 |
F1767-98(2005) |
Standard Guide for Forms Used for Search and Rescue |
搜索救生用表格格式指南 |
F1768-97(2002) |
Standard Guide for Using Whistle Signals During Rope Rescue
Operations |
绳索救援过程中使用笛声信号的标准导则 |
F1772-99(2005) |
Standard Specification for Climbing Harnesses |
登山装具的技术规范 |
F1773-97(2004) |
Standard Terminology Relating to Climbing and Mountaineering
Equipment and Practices |
攀缘和登山设备及登山训练有关标准术语 |
F1774-99(2005) |
Standard Specification for Climbing and Mountaineering
Carabiners |
攀缘及登山运动用卡宾枪 |
F1775-97(2004) |
Standard Specification for Labeling of Climbing and
Mountaineering Equipment |
攀缘及登山运动设备标签 |
F1776-01 |
Standard Specification for Eye Protective Devices for Paintball
Sports |
彩弹球运动用护目装置 |
F1777-02 |
Standard Practice for Paintball Field Operation |
彩弹球场地使用标准惯例 |
F1778-97(2002) |
Standard Guide for Selection of Skimmers for Oil-Spill
Response |
油溢反应分离器的选择标准导则 |
F1779-97(2003) |
Standard Practice for Reporting Visual Observations of Oil on
Water |
对水面上滑油进行目视观测报告的标准惯例 |
F1780-97(2002) |
Standard Guide for Estimating Oil Spill Recovery System
Effectiveness |
评估油溢回收系统有效性的标准导则 |
F1781-03 |
Standard Specification for Elastomeric Flexible Hinge Finger
Total Joint Implants |
弹性挠性关节指杆全连接植入物的标准规范 |
F1782-97(2002) |
Standard Practice for Amount of Ink Deposit on Fabric Type
Ribbons |
纺织类色带上油墨沉积量标准惯例 |
F1783-97(2002) |
Standard Guide for Performance of an Ice Rescuer—Level II |
冰上营救设备性能标准指南 |
F1784-97(2003)e1 |
Standard Test Method for Performance of a Pasta Cooker |
面食锅性能标准试验方法 |
F1785-97(2003)e1 |
Standard Test Method for Performance of Steam Kettles |
蒸汽锅性能标准试验方法 |
F1786-97(2004)e1 |
Standard Test Method for Performance of Braising Pans |
蒸锅性能试验方法 |
F1787-98(2003) |
Standard Test Method for Performance of Rotisserie Ovens |
携带式电热轮转烤肉器烤箱性能标准试验方法 |
F1788-97(2003) |
Standard Guide for In-Situ Burning of Oil Spills on Water:
Environmental and Operational Considerations |
水上石油泄漏原地燃烧指南:环境和操作事项 |
F1789-06a |
Standard Termninology for F16 Mechanical Fasteners |
F-16飞机用机械紧固件标准术语 |
F1790-05 |
Standard Test Method for Measuring Cut Resistance of Materials
Used in Protective Clothing |
保护服用材料的抗划裂测量标准试验方法 |
F1791-00 |
Standard Specification for Filters Used in Air or Nitrogen
Systems |
空气或氮气系统中使用的过滤器技术规范 |
F1791-00(2006) |
Standard Specification for Filters Used in Air or Nitrogen
Systems |
空气或氮气系统中使用的过滤器技术规范 |
F1792-97(2004) |
Standard Specification for Special Requirements for Valves Used
in Gaseous Oxygen Service |
气态供氧装置中使用的阀门的特殊要求 |
F1793-97(2004) |
Standard Specification for Automatic Shut-Off Valves (Also Known
as Excess Flow Valves, EFV) for Air Or Nitrogen Service |
空气或氮气装置中使用的自动切断阀(或称为流量过流阀,EFV)的技术规范 |
F1794-97(2004) |
Standard Specification for Hand-Operated, Globe-Style Valves for
Gas (Except Oxygen Gas), and Hydraulic Systems |
手动、球型阀气体(除氧气)和液压系统标准规范 |
F1795-00(2006) |
Standard Specification for Pressure-Reducing Valves for Air or
Nitrogen Systems |
空气或氮气系统减压阀标准规范 |
F1796-97(2002) |
Standard Specification for High Voltage Detectors—Part 1
Capacitive Type to be Used for Voltages Exceeding 600 Volts AC |
600伏以上电压的交流电用电容式高压检测器技术规范 |
F1797-98(2003) |
Standard Test Method for Acoustic Emission Testing of Insulated
Digger Derricks |
隔音的挖掘起重机声音传递试验标准试验方法 |
F1798-97(2003) |
Standard Guide for Evaluating the Static and Fatigue Properties
of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis
Implants |
脊柱关节固定植入用互连接结构和分组件的静态和疲劳特性评定标准导则 |
F1799-97(2004) |
Standard Guide for Shipboard Generated Waste Management
Audits |
舰船产生的废物管理审核标准导则 |
F1800-04 |
Standard Test Method for Cyclic Fatigue Testing of Metal Tibial
Tray Components of Total Knee Joint Replacements |
全膝关节替代物的金属胫骨盘部分疲劳周期测试试验方法 |
F1801-97(2004) |
Standard Practice for Corrosion Fatigue Testing of Metallic
Implant Materials |
金属植入材料腐蚀疲劳试验标准惯例 |
F1802-04 |
Standard Test Method for Performance Testing of Excess Flow
Valves |
溢流阀性能测试标准试验方法 |
F1803-06 |
Standard Specification for Poly (Vinyl Chloride)(PVC) Closed
Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter |
以受控内径为依据的聚氯乙烯封闭异型自流管道和管接头技术规范 |
F1804-03 |
Standard Practice for Determining Allowable Tensile Load for
Polyethylene (PE) Gas Pipe During Pull-In Installation |
在拉入式安装期间测定聚乙烯(PE)燃气管道的允许拉伸载荷的标准惯例 |
F1805-00 |
Standard Test Method for Single Wheel Driving Traction in a
Straight Line on Snow- and Ice-Covered Surfaces |
冰雪覆盖地面上单轮直线驱动牵引力的标准试验方法 |
F1806-97(2001)e1 |
Standard Practice for Tire Testing Operations—Basic Concepts and
Terminology for Reference Tire Use |
轮胎测试操作基本概念及基准轮胎用术语 |
F1807-05 |
Standard Specification for Metal Insert Fittings Utilizing a
Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing |
SDR9交联聚乙烯管用的利用卷制铜环的金属内插件标准规范 |
F1808-03 |
Standard Guide for Weight Control Technical Requirements for
Surface Ships |
水面舰艇重量控制技术要求指南 |
F1812-02 |
Standard Test Method for Determining the Effectiveness of
Membrane Switch ESD Shielding |
测定薄膜开关ESD屏蔽有效性的标准试验方法 |
F1813-01 |
Standard Specification for Wrought Titanium - 12 Molybdenum - 6
Zirconium - 2 Iron Alloy for Surgical Implant (UNS R58120) |
外科植入用Ti12Mo6ZnFe合金锻件规范 |
F1814-97a(2003) |
Standard Guide for Evaluating Modular Hip and Knee Joint
Components |
标准髋部和膝关节部件评价指南 |
F1816-97(2004) |
Standard Safety Specification for Drawstrings on Children's
Upper Outerwear |
儿童上衣的抽紧带安全规范 |
F1817-97(2003) |
Standard Test Method for Performance of Conveyor Ovens |
传送带式烤箱性能的标准试验方法 |
F1818-04 |
Standard Specification for Foot Protection for Chain Saw
Users |
链锯脚部保护的标准规范 |
F1819-04 |
Standard Test Method for Resistance of Materials Used in
Protective Clothing to Penetration by Synthetic Blood Using a Mechanical
Pressure Technique |
使用机械加压技术测试防护服耐人造血液渗透能力的标准试验方法 |
F1820-97(2003) |
Standard Test Method for Determining the Axial Disassembly Force
of a Modular Acetabular Device |
标准髋部和膝关节部件的轴向分解力检测试验方法 |
F1821-06 |
Standard Consumer Safety Specification for Toddler Beds |
婴儿床安全使用标准 |
F1823-97(2002) |
Standard Guide for Water Rescue Personal Flotation Device
(PFD) |
水中营救人员漂浮装置(PFD)指南 |
F1824-97(2002) |
Standard Guide for Performance of a Water Rescuer-Level II |
二级水中救援者能力要求指南 |
F1825-03 |
Standard Specification for Clampstick Type Live Line Tools |
固定长度夹紧卡住式带电工具的技术规范 |
F1826-00 |
Standard Specification for Live Line and Measuring Telescoping
Tools |
伸缩式带电工具技术规范 |
F1827-97(2006) |
Standard Terminology Relating to Food Service Equipment |
食品加工设备有关的术语 |
F1828-97(2006) |
Standard Specification for Ureteral Stents |
输尿管斯坦特固定模规范 |
F1829-98(2003) |
Standard Test Method for Static Evaluation of the Glenoid
Locking Mechanism in Shear |
关节盂锁定装置受剪切力的稳定性评价试验方法 |
F1830-97(2005) |
Standard Practice for Selection of Blood for In Vitro Evaluation
of Blood Pumps |
在玻璃器内评定血液抽吸泵功能所用血液的选择标准方法 |
F1831-97(2006) |
Standard Specification for Cranial Traction Tongs and Halo
External Spinal Immobilization Devices |
颅牵引钳和环状体外脊椎固定装置 |
F1832-97(2002) |
Standard Test Method for Determining the Force-Draw and Let-Down
Curves for Archery Bows |
拱形弓拉开力和松弛力曲线测定的标准试验方法 |
F1833-97(2006) |
Standard Test Method for Comparison of Rearfoot Motion Control
Properties of Running Shoes |
运动鞋后脚运动控制特性比较的标准试验方法 |
F1834-98(2004) |
Standard Guide for Consideration of Anaerobic Bioremediation as
a Chemical Pollutant Mitigation Method on Land |
将厌氧抗生物降解作用作为减缓陆地上化学污染物的方法指南 |
F1835-97(2002) |
Standard Guide for Cable Splicing Installations |
电缆拼接装置标准导则 |
F1836M-97(2002) |
Standard Specification for Stuffing Tubes, Nylon, and Packing
Assemblies (Metric) |
尼龙填料管和填密组件技术规范(米制) |
F1837M-97(2002) |
Standard Specification for Heat-Shrink Cable Entry Seals
(Metric) |
热收缩电缆引入线密封件(米制)的技术规范 |
F1838-98(2004)e1 |
Standard Performance Requirements for Child's Plastic Chairs for
Outdoor Use |
户外用儿童塑料座椅的性能要求 |
F1839-01 |
Standard Specification for Rigid Polyurethane Foam for Use as a
Standard Material for Testing Orthopaedic Devices and Instruments |
用作测试矫形术器件和仪器标准材料的刚性聚氨基甲酸乙酯泡沫的技术规范 |
F1840-98a(2004) |
Standard Terminology for Surgical Suture Needles |
外科手术缝合针的标准术语 |
F1841-97(2005) |
Standard Practice for Assessment of Hemolysis in Continuous Flow
Blood Pumps |
连续流量血液泵的溶血作用评定的标准惯例 |
F1842-02 |
Standard Test Method for Determining Ink or Coating Adhesion on
Plastic Substrates for Membrane Switch Applications |
测定膜片式开关用的塑料基材上油墨和涂层粘附力的标准试验方法 |
F1843-97(2002) |
Standard Practice for Sample Preparation of Transparent Plastic
Films for Specular Gloss Measurements, on Membrane Switch Overlays |
膜片式开关贴面上,镜面光泽测量用透明塑料膜样件制备标准惯例 |
F1844-97(2002) |
Standard Practice for Measuring Sheet Resistance of Thin Film
Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy
Current Gage |
用非接触式涡流测量仪测量平面显示板用的薄膜导体的薄膜电阻的标准惯例 |
F1845-97(2002) |
Standard Test Method for Trace Metallic Impurities in Electronic
Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon
Alloys by High-Mass-Reduction Glow Discharge Mass Spectrometer |
电子级铝铜,铝硅,铝铜硅合金中微量金属杂质试验方法 |
F1846-98(2003) |
Standard Practice for Symbols and Markings for Use With Land
Search Maps |
陆地探测地图上使用的符号及标志的标准惯例 |
F1847-98(2005) |
Standard Guide for Demonstrating Minimum Skills of Search and
Rescue Dogs and Handlers |
搜索救生犬及其主人基本技能示范指南 |
F1848-98(2005) |
Standard Classification for Search and Rescue Dog Crew/Teams |
搜索与救援猎犬组/队标准分类法 |
F1849-00 |
Standard Specification for Helmets Used in Short Track Speed Ice
Skating (Not to Include Hockey) |
短道速滑(不包括冰球)用头盔的技术规范 |
F1850-00(2005) |
Standard Specification for Particular Requirements for
Anesthesia Workstations and Their Components |
麻醉工作站(台)及其有关部门的特殊要求 |
F1851-98(2003) |
Standard Practice for Bar Code Verification |
条形码验证标准惯例 |
F1852-05 |
Standard Specification for Twist Off Type Tension Control
Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi
Minimum Tensile Strength |
经热处理最低抗拉强度为120/105ksi“拧断”型拉力控制结构钢螺栓/螺母/垫片组件技术规范 |
F1853-03 |
Standard Test Method for Measuring Sleeping Bag Packing
Volume |
睡袋容积测量的标准试验方法 |
F1854-01 |
Standard Test Method for Stereological Evaluation of Porous
Coatings on Medical Implants |
医学移植物上多孔涂层立体学评价(定)的标准试验方法 |
F1855-00(2005) |
Standard Specification for Polyoxymethylene (Acetal) for Medical
Applications |
医用聚甲醛规范 |
F1856-04 |
Standard Practice for Determining Toner Usage for Printer
Cartridges |
测定打印机滤筒(cartridge)卡盒墨粉使用率的标准惯例 |
F1857-01(2006) |
Standard Termninology Relating to Ink Jet Printers and Images
Made Therefrom |
喷墨打印机及其打印出的图片相关术语 |
F1858-98(2004)e1 |
Standard Performance Requirements for Multipositional Plastic
Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use |
户外使用的带可调节后背或可向后倾斜机构的多位置塑料座椅的性能要求 |
F1859-04 |
Standard Specification for Rubber Sheet Floor Covering Without
Backing |
未加背衬的生橡胶薄板材地板的技术规范 |
F1860-04 |
Standard Specification for Rubber Sheet Floor Covering With
Backing |
加有背衬的生橡胶薄板材地板的技术规范 |
F1861-02 |
Standard Specification for Resilient Wall Base |
弹性墙基(踢脚板)技术规范 |
F1862-05 |
Standard Test Method for Resistance of Medical Face Masks to
Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a
Known Velocity) |
用人造血液(以一定粘度水平注入固定容量)测定医疗面罩耐渗透率的标准试验方法 |
F1863-98(2004) |
Standard Test Method for Measuring the Night Vision
Goggle-Weighted Transmisivity of Transparent Parts |
测定透明部件夜视加权护镜的透射度的标准试验方法 |
F1864-05 |
Standard Test Method for Dust Erosion Resistance of Optical and
Infrared Transparent Materials and Coatings |
光学和红外透明材料及覆层的耐尘土腐蚀试验方法 |
F1865-02a |
Standard Specification for Mechanical Cold Expansion Insert
Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX)
Tubing |
交联聚乙烯(PEX)管材机械性冷扩张插入式安装压缩套筒规范 |
F1866-05 |
Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic
Schedule 40 Drainage and DWV Fabricated Fittings |
管材系列规范40聚氯乙烯塑料挤出体积和排水、排渣、排气拼装接头的技术规范 |
F1867-06 |
Standard Practice for Installation of Folded/Formed Poly (Vinyl
Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit
Rehabilitation |
现用下水管道和一般管道修复用的A型折叠/成形聚氯乙烯管安装标准惯例 |
F1868-02 |
Standard Test Method for Thermal and Evaporative Resistance of
Clothing Materials Using a Sweating Hot Plate |
用有凝结水的热板测定服装材料耐热性和蒸发特性的标准试验方法 |
F1869-04 |
Standard Test Method for Measuring Moisture Vapor Emission Rate
of Concrete Subfloor Using Anhydrous Calcium Chloride |
用脱水氯化钙测量混凝土底层地板的湿气散发率的标准试验方法 |
F1870-05 |
Standard Guide for Selection of Fire Test Methods for the
Assessment of Upholstered Furnishings in Detention and Correctional
Facilities |
矫形和固定器械中支撑装置的评价的试验方法 |
F1871-02e1 |
Standard Specification for Folded/Formed Poly (Vinyl Chloride)
Pipe Type A for Existing Sewer and Conduit Rehabilitation |
现有下水道和管道修复用折叠式/成形聚氯乙烯A型管技术规范 |
F1872-05 |
Standard Guide for Use of Chemical Shoreline Cleaning Agents:
Environmental and Operational Considerations |
化学海岸线清洁剂使用指南:环境和操作事项 |
F1873-98 |
Standard Specification for High-Purity Dense Yttria Tetragonal
Zirconium Oxide Polycrystal (Y-TZP) for Surgical Implant Applications |
外科植入用高纯度致密氧化钇四方晶体氧化锆(Y-T2P)技术规范 |
F1874-98(2004) |
Standard Test Method for Bend Testing of Needles Used in
Surgical Sutures |
外科缝合针弯曲试验试验方法 |
F1875-98(2004) |
Standard Practice for Fretting Corrosion Testing of Modular
Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface |
标准植入物界面摩擦腐蚀试验标准惯例:髋骨头和圆锥界面 |
F1876-98(2003)e1 |
Standard Specification for Polyetherketoneetherketoneketone
(PEKEKK) Resins for Surgical Implant Applications |
外科植入用聚醚酮醚酮酮(PEKEKK)树脂规范 |
F1877-05 |
Standard Practice for Characterization of Particles |
粒子特性标准惯例 |
F1878-98(2004) |
Standard Guide for Escort Vessel Evaluation and Selection |
护航舰评价和分类指南 |
F1879-98(2005) |
Standard Guide for Demonstrating Obedience and Agility in Search
and Rescue Dogs |
搜索救生犬服从性和灵活性示范指南 |
F1880-98(2004) |
Standard Test Method for the Determination of Percent of Let-Off
for Archery Bows |
测定拱形弓发射力的百分比标准试验方法 |
F1881-05 |
Standard Test Method for Measuring Baseball Bat Performance
Factor |
测量棒球球棒性能参数(指标)的标准试验方法 |
F1882-06 |
Standard Specification for Residential Basketball Systems |
住宅区篮球设施的技术规范 |
F1883-03 |
Standard Practice for Selection of Wire and Cable Size in AWG or
Metric Units |
用美国线规(AWG)或米制单位表示的导线和电缆规格的选择标准惯例 |
F1884-04 |
Standard Test Method for Determining Residual Solvents in
Packaging Materials |
包装材料内残余溶剂检测试验方法 |
F1885-04 |
Standard Guide for Irradiation of Dried Spices, Herbs, and
Vegetable Seasonings to Control Pathogens and Other Microorganisms |
辐射控制干香料,草和自然干燥贮存蔬菜中病菌和微生物的指南 |
F1886-98(2004) |
Standard Test Method for Determining Integrity of Seals for
Medical Packaging by Visual Inspection |
目视检查测定医药包装密封完整性的标准试验方法 |
F1887-02 |
Standard Test Method for Measuring the Coefficient of
Restitution (COR) of Baseballs and Softballs |
棒球和垒球回复系数(COR)测量试验方法 |
F1888-02 |
Test Method for Compression-Displacement of Baseballs and
Softballs |
棒球和垒球压缩位移试验方法 |
F1889-05 |
Standard Guide for Straightness Measurement of Arrow Shafts |
箭杆直度测量指南 |
F1890-05 |
Standard Test Method for Measuring Softball Bat Performance
Factor |
垒球棒性能要素测量试验方法 |
F1891-02be1 |
Standard Specification for Arc and Flame Resistant Rainwear |
耐电弧和火焰的雨衣技术规范 |
F1892-06 |
Standard Guide for Ionizing Radiation (Total Dose) Effects
Testing of Semiconductor Devices |
半导体设备电离辐射(全剂量)影响试验指南 |
F1893-98(2003) |
Guide for Measurement of Ionizing Dose-Rate Burnout of
Semiconductor Devices |
半导体器件电离剂量率烧断测量导则 |
F1894-98(2003) |
Test Method for Quantifying Tungsten Silicide Semiconductor
Process Films for Composition and Thickness |
测定硅化钨半导体工艺薄膜成份和厚度的试验方法 |
F1895-98(2004) |
Practice for Submersion of a Membrane Switch |
膜片式开关浸渍标准惯例 |
F1896-98(2004) |
Test Method for Determining the Electrical Resistivity of a
Printed Conductive Material |
测定印刷导电材料电阻率的试验方法 |
F1897-04 |
Standard Specification for Leg Protection for Chain Saw Users |
叠(链)锯使用者腿部保护技术规范 |
F1898-01 |
Standard Specification for Helmets for Non-Motorized Wheeled
Vehicle Used by Infants and Toddlers |
儿童及幼儿自行车头盔规范 |
F1899-98(2003) |
Standard Specification for Food Waste Pulper Without Waterpress
Assembly |
无水压食物垃圾打碎机规范 |
F1900-98(2004) |
Standard Test Method for Water Resistance of Footwear Using a
Walking Step Simulator |
用走步模拟器测试鞋类防水性能的试验方法 |
F1901-98(2004) |
Standard Specification for Polyethylene (PE) Pipe and Fittings
for Roof Drain Systems |
屋顶排水系统用聚乙烯管道和管接头技术规范 |
F1903-98(2003) |
Standard Practice for Testing for Biological Responses to
Particles In Vitro |
试验室颗粒生物响应试验标准惯例 |
F1904-98(2003) |
Standard Practice for Testing the Biological Responses to
Particles In Vivo |
自然条件下颗粒生物响应试验标准惯例 |
F1905-98(2003) |
Standard Practice for Selecting Tests for Determining the
Propensity of Materials to Cause Immunotoxicity |
检测产生免疫毒素的材料习性的选择试验的标准惯例 |
F1906-98(2003) |
Standard Practice for Evaluation of Immune Responses In
Biocompatibility Testing Using ELISA Tests, Lymphocyte, Proliferation, and
Cell Migration |
通过淋巴细胞增生和细胞转移ELISA试验来评价生物相容性中免疫反应的标准惯例 |
F1908-06 |
Standard Guide for Fences for Residential Outdoor Swimming
Pools, Hot Tubs, and Spas |
住宅区户外游泳池,温泉,矿泉疗养地用栏栅的标准导则 |
F1909-98(2004) |
Specification for Preformed Open-Cell Sponge Rubber Pail and
Drum Gaskets |
预成形开孔海绵橡胶桶和圆筒垫片技术规范 |
F1910-98(2003) |
Standard Specification for Long Barbed Tape Obstacles |
有刺长带状障碍物技术规范 |
F1911-05 |
Standard Practice for Installation of Barbed Tape |
有倒钩的带的安装惯例 |
F1912-98(2004) |
Standard Specification for Safety of Bean Bag Chairs |
口袋式座椅安全性规范 |
F1913-04 |
Standard Specification for Vinyl Sheet Floor Covering Without
Backing |
无衬垫薄乙烯树脂地面铺层规范 |
F1914-05 |
Standard Test Method for Short-Term Indentation and Residual
Indentation of Resilient Floor Covering |
弹性地面铺层短期凹陷和残余陷痕试验方法 |
F1915-05 |
Standard Test Methods for Glazing for Detention Facilities |
拦阻设备的玻璃制品试验方法 |
F1916-98 |
Standard Specification for Selecting Chain Link Barrier Systems
With Coated Chain Link Fence Fabric and Round Posts for Detention
Applications |
拦阻用涂有涂层的链式连接拦阻纺织物和圆形支柱的链式连接拦护系统分类规范 |
F1917-00 |
Standard Consumer Safety Performance Specification for Infant
Bedding and Related Accessories |
婴儿床及相关组件用户使用安全性能规范 |
F1918-04 |
Standard Safety Performance Specification for Soft Contained
Play Equipment |
软包装娱乐设备安全性能规范 |
F1919-03 |
Standard Specification for Griddles, Single and Double Sided,
Self-heating, Counter or Stand Mounted Gas and Electric Fired |
单面或双面自热台式或支架式燃气和电加热煎锅规范 |
F1920-98(2003) |
Standard Test Method for Energy Performance of Rack Conveyor,
Hot Water Sanitizing, Commercial Dishwashing Machines |
支架传送,热水清洁的商用洗碗机动力性能试验方法 |
F1921-98(2004) |
Standard Test Method for Hot Seal Strength (Hot Tack) of
Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of
Flexible Webs |
热塑聚合物和混合物构成的柔性薄膜密封表面热密封强度(热粘性)试验方法 |
F1922-98(2005) |
Standard Test Method for Tires, Pneumatic, Vehicular, Highway |
公路车辆充气轮胎试验方法 |
F1923-98(2005) |
Standard Test Method for Tires, Pneumatic, Low Speed, Off
Highway |
越野低速车辆充气轮胎试验方法 |
F1924-05 |
Standard Specification for Plastic Mechanical Fittings for Use
on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and
Tubing |
控制外径聚乙烯输气管道和导管塑料机械性连接件规范 |
F1925-99(2005) |
Standard Specification for Virgin Poly(L-Lactic Acid) Resin for
Surgical Implants |
外科用纯聚合物(左旋乳酸)树脂规范 |
F1926-03 |
Standard Test Method for Evaluation of the Environmental
Stability of Calcium Phosphate Coatings |
磷酸钙涂料环境稳定性评估试验方法 |
F1927-98(2004) |
Standard Test Method for Determination of Oxygen Gas
Transmission Rate, Permeability and Permeance at Controlled Relative
Humidity Through Barrier Materials Using a Coulometric Detector |
用库仑计检测控制相对湿度条件下通过密闭材料的氧气传输速率,渗透度和渗透性的试验方法 |
F1928-98(2004)e1 |
Standard Safety Guide for Consumer Recreational Use of
Fun-Karts |
消费者使用娱乐性小型赛车的安全指南 |
F1929-98(2004) |
Standard Test Method for Detecting Seal Leaks in Porous Medical
Packaging by Dye Penetration |
干渗透法检测药品多孔包装物的密封渗漏性能的试验方法 |
F1930-00 |
Standard Test Method for Evaluation of Flame Resistant Clothing
for Protection Against Flash Fire Simulations Using an Instrumented
Manikin |
用人体模型模拟试验评估放火服对火焰的防御能力的试验方法 |
F1931-98(2004) |
Standard Test Method for Characterization of Gymnastic Landing
Mats and Floor Exercise Surfaces |
体操落地垫和地面训练场地表面特性试验方法 |
F1932-98(2004) |
Standard Test Method for Measuring Sleeping Bag Loft |
测量睡袋伸缩性试验方法 |
F1933-98(2004) |
Standard Specification for Illustrating the Footprint of a
Backpacking or Mountaineering Tent |
图例说明背包旅行者或登山运动员帐篷的固定点图示规范 |
F1934-98(2004) |
Standard Test Method for Weighing a Backpacking or
Mountaineering Tent |
背包旅行者和登山者用帐篷称重试验方法 |
F1935-01 |
Standard Test Method for Measuring the Headroom of a Backpacking
or Mountaineering Tent |
背包旅行者和登山者用帐篷尖顶高度测量试验方法 |
F1936-98 |
Standard Specification for Shock-Absorbing Properties of North
American Football Field Playing Systems as Measured in the Field |
在场地上测量美式足球运动场地减振性能规范 |
F1937-04 |
Standard Specification for Body Protectors Used in Horse Sports
and Horseback Riding |
马术运动和骑马用人体保护设备规范 |
F1938-98(2004) |
Guide for Safer Use of Movable Soccer Goals |
英式足球可移动式球门安全使用指南 |
F1939-99a |
Standard Test Method for Radiant Protective Performance of Flame
Resistant Clothing Materials |
放火服装材料的防辐射性能试验方法 |
F1940-01 |
Standard Test Method for Process Control Verification to Prevent
Hydrogen Embrittlement in Plated or Coated Fasteners |
电镀或涂层防护的紧固件防氢脆工艺控制检验试验方法 |
F1941M-05 |
Standard Specification for Electrodeposited Coatings on Threaded
Fasteners [Metric] |
螺纹紧固件(统一标准英制螺纹(UN/UNR))电镀层规范 |
F1941-00(2006) |
Standard Specification for Electrodeposited Coatings on Threaded
Fasteners (Unified Inch Screw Threads (UN/UNR)) |
螺纹经固件电镀层规范(公制) |
F1942-98(2003) |
Standard Practice for Creating Test Targets for Determining the
Ink Yield of the Imaging Supplies Used in Ink Jet Printers |
检测喷墨打印机图象打印时墨水流动性的新增试验对象的标准惯例 |
F1943-98(2003) |
Standard Test Method for Determining the Dynamic Thermal
Response of Thermal Mass Transfer Ribbon Products—Atlantek Method |
检测热压印带产品力学热反应的试验方法-Atlantek法 |
F1944-98(2003) |
Standard Practice for Determining the Quality of the Text, Line-
and Solid-Fill Output Produced by Ink Jet Printers |
检测喷墨打印机打出的制品正文线条及虚实质量的标准惯例 |
F1945-05 |
Standard Practice for Determining the Lightfastness of Ink Jet
Prints Exposed to Indoor Fluorescent Lighting |
检测喷墨打印在室内荧光灯照射下的不褪色性标准惯例 |
F1946-04 |
Standard Practice for Determining the Lightfastness of Ink Jet
Prints Exposed to Indoor Fluorescent Lighting and Window-Filtered
Daylight |
检测喷墨打印在室内荧光灯照射和窗户射入的日光下的不褪色性标准惯例 |
F1947-04 |
Standard Practice for Installation of Folded Poly (Vinyl
Chloride) (PVC) Pipe into Existing Sewers and Conduits |
在现存的污水管道和输水管道重安装折叠式聚乙烯管的标准惯例 |
F1948-05 |
Standard Specification for Metallic Mechanical Fittings for Use
on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and
Tubing |
用于外径控制热塑供气管道和支管的金属机械性连接件规范 |
F1949-99 |
Standard Specification for Medical Oxygen Delivery Systems for
EMS Ground Vehicles |
急救医疗处地面车辆用医用氧气供应系统规范 |
F1950-99 |
Standard Specification for Physical Information to be
Transferred With Used Amusement Rides and Devices |
通过娱乐性骑马或相关器材获得的人体状态信息的规范 |
F1951-99 |
Standard Specification for Determination of Accessibility of
Surface Systems Under and Around Playground Equipment |
检测娱乐场地设施下面和周围的表面系统易装卸性规范 |
F1952-00 |
Standard Specification for Helmets used for Downhill Mountain
Bicycle Racing |
山地自行车下降赛中使用的头盔规范 |
F1953-99(2003) |
Standard Guide for Construction and Maintenance of Grass Tennis
Courts |
草地网球场地的结构和维护指南 |
F1955-99(2005) |
Standard Test Method for Flammability of Sleeping Bags |
睡袋可燃性试验方法 |
F1956-99(2005) |
Standard Specification for Rescue Carabiners |
救生用卡环规范 |
F1957-99(2004) |
Standard Test Method for Composite Foam Hardness-Durometer
Hardness |
合成泡沫塑料硬度试验方法-丢洛硬度 |
F1958/F1958M-99(2005) |
Standard Test Method for Determining the Ignitability of
Non-flame-Resistance Materials for Clothing by Electric Arc Exposure
Method Using Mannequins |
用人体模型进行电弧放电法试验检测非阻燃服装材料的可燃性的试验方法 |
F1959/F1959M-05a |
Standard Test Method for Determining the Arc Thermal Performance
Value of Materials for Clothing |
服装材料电弧热性能试验方法 |
F1960-05 |
Standard Specification for Cold Expansion Fittings with PEX
Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing |
带有交联聚乙烯(PEX)加强垫圈的用于连接交联聚乙烯(PEX)软管的冷延展接头规范 |
F1961-02a |
Standard Specification for Metal Mechanical Cold Flare
Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX)
Tubing |
用于交联聚乙烯(PEX)软管的带盘簧的金属机械冷爆压缩接头规范 |
F1962-05 |
Standard Guide for Use of Maxi-Horizontal Directional Drilling
for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including
River Crossings |
安装聚乙烯管或在障碍物,包括河流交汇处下面的导管最大水平方向钻孔法使用指南 |
F1963-05 |
Standard Specification for Deep-Fat Fryers, Gas or Electric,
Open |
开放式燃气或电油炸锅规范 |
F1964-99(2005) |
Standard Test Method for Performance of Pressure and Kettle
Fryers |
压力油炸锅性能试验方法 |
F1965-99(2005) |
Standard Test Method for Performance of Deck Ovens |
平板式烤炉性能试验方法 |
F1966-03 |
Standard Specification for Dough Divider and Rounding
Machines |
面团分割和成型机械规范 |
F1967-04 |
Standard Consumer Safety Specification for Infant Bath Seats |
婴儿沐浴座椅的消费者安全规范 |
F1970-05 |
Standard Specification for Special Engineered Fittings,
Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or
Chlorinated Poly (Vinyl Chloride) (CPVC) Systems |
在聚氯乙烯(PVC)或氯化聚氯乙烯(CPVC)系统中使用的特殊设计的连接件或附件规范 |
F1971-05 |
Standard Test Method for Electrical Resistance of Tires Under
Load On the Test Bench |
试验台下安装的轮胎电绝缘性能试验方法 |
F1972-05 |
Standard Guide for Terminology Relating to Candles and
Associated Accessory Items |
蜡烛及相关用品的术语指南 |
F1973-05 |
Standard Specification for Factory Assembled Anodeless Risers
and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) Fuel
Gas Distribution Systems |
工厂安装在聚乙烯(PE)油气输送系统中的表面未阳极化的升降设备和输送连接件的规范 |
F1974-04 |
Standard Specification for Metal Insert Fittings for
Polyethylene/Aluminum/Polyethylene and Crosslinked
Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
用于聚乙烯/铝/聚乙烯和交联聚乙烯/铝/交联聚乙烯复合材料压力管道的金属插入式连接件规范 |
F1975-02 |
Standard Specification for Nonpowered Bicycle Trailers Designed
for Human Passengers |
为载客而设计的无动力两轮拖车规范 |
F1976-06 |
Standard Test Method for Impact Attenuation Properties of
Athletic Shoes Using an Impact Test |
用冲击试验检验运动鞋缓冲性能的试验方法 |
F1977-04 |
Standard Test Method for Determining Initial, Fractional,
Filtration Efficiency of a Vacuum Cleaner System |
真空吸尘器初始吸力,分部吸力和过滤能力的试验方法 |
F1978-00e1 |
Standard Test Method for Measuring Abrasion Resistance of
Metallic Thermal Spray Coatings by Using the TaberTM Abraser |
用Taber研磨机检测金属热喷涂涂层的耐磨性试验方法 |
F1979-04 |
Standard Specification for Paintballs Used in the Sport of
Paintball |
彩弹球运动用彩弹球规范 |
F1980-02 |
Standard Guide for Accelerated Aging of Sterile Medical Device
Packages |
无菌医疗器械包裹加速时效指南 |
F1981-99 |
Standard Specification for Suction Catheters for Use in the
Respiratory Tract |
呼吸道用吸液导管规范 |
F1983-99(2003) |
Standard Practice for Assessment of Compatibiltiy of
Absorbable/Resorbable Biomaterials for Implant Applications |
植入用的吸收/再吸收性生物材料相容性评估标准惯例 |
F1984-99(2003) |
Standard Practice for Testing for Whole Complement Activation in
Serum by Solid Materials |
用固体材料检验血浆中所有补体活性的标准惯例 |
F1985-99(2005) |
Standard Specification for Pneumatic-Operated, Globe-Style,
Control Valves |
空气球形控制阀规范 |
F1986-01 |
Standard Specification for Multilayer Pipe Type 2, Compression
Fittings, and Compression Joints for Hot and Cold Drinking-Water
Systems |
冷热饮用水系统用2型多层管、耐压组件和压力接头规范 |
F1987-01 |
Standard Specification for Multilayer Pipe Type 2 , Compression
Fittings, and Compression Joints for Hydronic Heating Systems |
热水系统用2型多层管、耐压组件和压力接头规范 |
F1988-99(2004)e1 |
Standard Performance Requirements for Plastic Chaise Lounges,
With or Without Moving Arms, With Adjustable Backs, for Outdoor Use |
户外用有可调式靠背,有或者没有扶手的塑料躺椅性能要求 |
F1989-05 |
Specification for Cooking Fire Suppression Blankets |
消防塔规范 |
F1990-99 |
Standard Guide for In-Situ Burning of Spilled Oil: Ignition
Devices |
就地燃烧处理遗洒油料的指南:点火装置 |
F1991-99(2005) |
Standard Test Method for Performance of Chinese (Wok) Ranges |
中国炉灶(WoK)性能试验方法 |
F1992-99 |
Standard Practice for Reprocessing of Reusable, Heat-Stable
Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes |
与能变形的内诊镜一起使用的、可以再度使用的热稳定的内窥镜的附件设备的回收惯例 |
F1993-99(2005) |
Standard Classification of Human Search and Rescue Resources |
人员搜寻救援供应分类 |
F1994-99(2005) |
Standard Test Method for Shipboard Fixed Foam Firefighting
Systems |
船用泡沫灭火系统试验方法 |
F1995-00(2005) |
Standard Test Method for Determining the Bond Strength for a
Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch |
利用薄膜开关剪切力测定表面安装设备(SMD)粘着强度的试验方法 |
F1996-06 |
Standard Test Method for Silver Migration for Membrane Switch
Circuitry |
薄膜开关电路系统银迁移的试验方法 |
F1997-99(2005) |
Standard Test Method for Determining the Sensitivity (Teasing)
of a Tactile Membrane Switch |
薄膜开关灵敏度(触动)测定试验方法 |
F1999-00(2006) |
Standard Practice for Installation of Rigid Poly(Vinyl Chloride)
(PVC) Fence Systems |
硬质聚乙烯(聚氯乙烯)(PVC)防护系统安装惯例 |
F2000-00a |
Standard Guide for Fences for Ballfields and Other Sports
Facilities |
球场以及其他运动设施防护指南 |
F2001-01 |
Standard Guide for Vessel-Related Technical Information for Use
in Developing an Electronic Database and Ship Safety Record |
开发电子数据库和船舶安全记录用与船舶有关的技术信息指南 |
F2003-02 |
Standard Practice for Accelerated Aging of Ultra-High Molecular
Weight Polyethylene after Gamma Irradiation in Air |
经空气中γ射线辐射超高分子聚氯乙烯加速老化惯例 |
F2004-05 |
Standard Test Method for Transformation Temperature of
Nickel-Titanium Alloys by Thermal Analysis |
热分析测量镍钛合金传导温度试验方法 |
F2005-05 |
Standard Terminology for Nickel-Titanium Shape Memory Alloys |
镍钛记忆合金术语 |
F2006-00(2005) |
Standard Safety Specification for Window Fall Prevention Devices
for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows |
非紧急出口(出口)和营救窗口(入口)用窗下落防护装置的标准安全规范 |
F2007-06 |
Standard Practice for Classification, Design, Manufacture, and
Operation of Concession Go-Karts and Facilities |
碰碰车和相关设施的分级,设计,制造和操作惯例 |
F2008-00(2006) |
Standard Guide for Qualitative Observations of Skimmer
Performance |
撇油器性能定性观察指南 |
F2009-00(2005) |
Standard Test Method for Determining the Axial Disassembly Force
of Taper Connections of Modular Prostheses |
测定模块化假体锥形连接的轴向拆解力的试验方法 |
F2010-00(2005) |
Standard Test Method for Evaluation of Glove Effects on Wearer
Hand Dexterity Using a Modified Pegboard Test |
特制钉板试验评估手套对佩戴者手部灵活性影响的试验方法 |
F2011-02e1 |
Standard Specification for Safety and Performance of
Fun-Karts |
游戏赛车安全和性能规范 |
F2012-03 |
Standard Consumer Safety Performance Specification for
Stationary Activity Centers |
永久性活动中心消费者安全性规范 |
F2013-05 |
Standard Test Method for Determination of Residual Acetaldehyde
in Polyethylene Terephthalate Bottle Polymer Using an Automated Static
Head-Space Sampling Device and a Capillary GC with a Flame Ionization
Detector |
用自动静态顶部空间取样设备和带火焰电离检测器的毛细管GC测定聚乙烯对苯二甲酸酯瓶装聚合物中残留乙醛的标准试验方法 |
F2014-00(2006) |
Standard Specification for Non-Reinforced Extruded Tee
Connections for Piping Applications |
管路系统用非增强挤压成形T字形连接口规范 |
F2015-00(2006) |
Standard Specification for Lap Joint Flange Pipe End
Applications |
搭接凸缘管端应用规范 |
F2016-00(2006) |
Standard Practice for Establishing Shipbuilding Quality
Requirements for Hull Structure, Outfitting, and Coatings |
对船壳结构,全套设备和涂层的造船质量要求评估惯例 |
F2017-00(2006) |
Standard Guide for Database Structure of Electronic Data
Interchange Between Ship Owner and Shipyard for Contract Administration |
船东和造船场与合同管理机构进行电子数据交换的数据结构指南 |
F2018-00e1 |
Standard Test Method for Time-to-Failure of Plastics Using Plane
Strain Tensile Specimens |
用平面变形拉伸试验样品进行塑料失效时间测定试验方法 |
F2019-03 |
Standard Practice for Rehabilitation of Existing Pipelines and
Conduits by the Pulled in Place Installation of Glass Reinforced Plastic
(GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) |
用(CIPP)玻璃纤维增强塑料(GRP)现场成型热固树胶管(CIPP)现场安装对现有管道和水管修复的惯例 |
F2020-02a |
Standard Practice for Design, Construction, and Procurement of
Emergency Medical Services Systems (EMSS) Ambulances |
急救医疗服务系统(EMSS)救护车设计,制造和采购惯例 |
F2021-06 |
Standard Guide for Design and Installation of Plastic Siphonic
Roof Drainage Systems |
塑料屋顶排水管系统设计和安装规范 |
F2022-00 |
Standard Test Method for Performance of Booster Heaters |
调压式取暖器性能试验方法 |
F2023-05 |
Standard Test Method for Evaluating the Oxidative Resistance of
Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated
Water |
交联聚氯乙烯(PEX)管道和系统对含氯热水的耐氧化性评估试验方法 |
F2024-00 |
Standard Practice for X-ray Diffraction Determination of Phase
Content of Plasma-Sprayed Hydroxyapatite Coatings |
等离子喷涂羟基磷酸钙涂料相容量X-射线衍射检测惯例 |
F2025-06 |
Standard Practice for Gravimetric Measurement of Polymeric
Components for Wear Assessment |
聚合物组件磨损评估重量法测量惯例 |
F2026-02 |
Standard Specification for Polyetheretherketone (PEEK) Polymers
for Surgical Implant Applications |
外科植入用聚乙醚酮(PEEK)聚合物规范 |
F2027-00e1 |
Standard Guide for Characterization and Testing of Substrate
Materials for Tissue-Engineered Medical Products |
医用组织加固产品基础材料性能测试指南 |
F2028-05 |
Standard Test Methods for Dynamic Evaluation of Glenoid
Loosening or Disassociation |
人工关节松动和脱离动态评估试验方法 |
F2029-00 |
Standard Practices for Making Heatseals for Determination of
Heatsealability of Flexible Webs as Measured by Seal Strength |
通过对密封强度测量来检测柔性薄膜热封性方法进行热封的惯例 |
F2030-00 |
Standard Specification for Paintball Cylinder Burst Disk
Assemblies |
彩弹球弹射盘组件规范 |
F2031-05 |
Standard Test Method for Measurement of Arrow Shaft Static Spine
(Stiffness) |
静态轴偏离(刚度)测量实验方法 |
F2032-00 |
Standard Specification for Helmets Used for BMX Cycling |
自行车越野赛用头盔规范 |
F2033-05 |
Standard Specification for Total Hip Joint Prosthesis and Hip
Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric
Materials |
金属,陶瓷和聚和物材料制整个髋关节和髋部内腔关节表面规范 |
F2034-03e1 |
Standard Specification for Sheet Linoleum Floor Covering |
层状铺地板油毡规范 |
F2035-00(2006) |
Standard Practice for Measuring the Dark Stability of Ink Jet
Prints |
喷墨打印墨水稳定性测量惯例 |
F2036-05 |
Standard Test Method for Evaluation of Larger Area Density and
Background on Electrophotographic Printers |
电子照相印刷机表面密度和背景评估试验方法 |
F2037-00(2006) |
Standard Practice for Predicting the Lifetime of Ink Jet Prints
Stored in Dark Keeping Conditions in Typical Office Environments |
办公室环境下避光保存喷墨打印墨水寿命预测惯例 |
F2038-00(2005) |
Standard Guide for Silicone Elastomers, Gels and Foams Used in
Medical Applications Part I - Formulations and Uncured Materials |
医用硅胶弹性体,凝胶和泡沫指南第一部分-配方和未处理的材料 |
F2039-00(2006) |
Standard Guide for Basic Elements of Shipboard Occupational
Health and Safety Program |
船只职业健康和安全计划基本要素指南 |
F2040-06 |
Standard Specification for Helmets Used for Recreational Snow
Sports |
雪上娱乐运动用头盔规范 |
F2041-00 |
Standard Specification for Paintball Marker Warnings |
彩弹球标记警示规范 |
F2042-00(2005) |
Standard Guide for Silicone Elastomers, Gels, and Foams Used in
Medical Applications Part II - Crosslinking and Fabrication |
医用硅胶弹性体,凝胶和泡沫指南第二部分-交联和构造 |
F2043-00 |
Standard Classification for Bicycle Usage |
自行车使用情况分类 |
F2044-00 |
Standard Specification for Liquid Level Indicating Equipment,
Electrical |
电动液面指示设备规范 |
F2045-00(2006) |
Standard Specification for Indicators, Sight, Liquid Level,
Direct and Indirect Reading, Tubular Glass/Plastic |
玻璃/塑料管,直接和间接目视读数,液面指示计规范 |
F2046-00(2006) |
Standard Specification for Tachometers, Various |
各类转速计规范 |
F2047-00(2006) |
Standard Practice for Workers' Compensation Coverage of
Emergency Services Volunteers |
紧急服务志愿者中人员补偿保险范围惯例 |
F2048-00 |
Standard Practice for Reporting Slip Resistance Test Results |
防滑性测试结果报告惯例 |
F2049-03 |
Standard Guide for Fences/Barriers for Public, Commercial, and
Multi-Family Residential Use Outdoor Play Areas |
公共场所,商业场所及综合家庭居所用户外游戏场地护栏指南 |
F2050-03 |
Standard Consumer Safety Performance Specification for Hand-Held
Infant Carriers |
手提式婴儿架消费者安全性能规范 |
F2051-00 |
Standard Specification for Implantable Saline Filled Breast
Prosthesis |
可植入盐类胸部填充物规范 |
F2052-06e1 |
Standard Test Method for Measurement of Magnetically Induced
Displacement Force on Medical Devices in the Magnetic Resonance
Environment |
在有磁场环境下医疗设备的磁影响位移力的测试方法 |
F2053-00(2006) |
Standard Guide for Documenting the Results of Airborne Particle
Penetration Testing of Protective Clothing Materials |
防护服材料空气粒子渗透性试验结果文件格式指南 |
F2054-00(2005) |
Standard Test Method for Burst Testing of Flexible Package Seals
Using Internal Air Pressurization Within Restraining Plates |
带加强板的内部充气柔性密封包装材料爆裂试验方法 |
F2055-00 |
Standard Test Method for Size and Squareness of Resilient Floor
Tile by Dial Gage Method |
Dial Gage法测量弹性地砖尺寸和方整度的试验方法 |
F2056-00 |
Standard Safety and Performance Specification for Soccer
Goals |
英式足球球门安全和性能规范 |
F2057-04 |
Standard Safety Specification for Chests, Door Chests, and
Dressers |
柜子,前开门柜子,梳妆台安全规范 |
F2058-00 |
Standard Specification for Cautionary Labeling for Candles
Burned in a Home |
房间内点燃蜡烛的防火警示规范 |
F2059-00 |
Standard Test Method for Laboratory Oil Spill Dispersant
Effectiveness Using The Swirling Flask |
用涡流瓶测定实验室漏油分散剂效力的试验方法 |
F2060-00(2005) |
Standard Guide for Maintaining Cool Season Turfgrasses on
Athletic Fields |
寒冷季节运动场上的草皮维护指南 |
F2061-00 |
Standard Practice for Chemical Protective Clothing Care and
Maintenance Instructions |
化学防护服维护与保养说明标准惯例 |
F2062-00 |
Standard Specification for Square Drive Interconnections on
Surgical Instruments |
外科用设备中正方操作面操作互相联络规范 |
F2063-05 |
Standard Specification for Wrought Nickel-Titanium Shape Memory
Alloys for Medical Devices and Surgical Implants |
医疗设备和外科植入物用的锻造镍-钛成型记忆合金规范 |
F2064-00(2006) |
Standard Guide for Characterization and Testing of Alginates as
Starting Materials Intended for Use in Biomedical and Tissue-Engineered
Medical Products Application |
生物医学和组织工程医用产品用作为起始物料的藻酸盐品质鉴定与测试指南 |
F2065-00(2006) |
Standard Practice for Testing for Alternative Pathway Complement
Activation in Serum by Solid Materials |
用固体材料测试血浆中二选一路径补体活性的惯例 |
F2066-01 |
Standard Specification for Wrought Titanium-15 Molybdenum Alloy
for Surgical Implant Applications (UNS R58150) |
外科植入物用锻制钛-15钼合金规范(UNS R58150) |
F2067-00 |
Standard Practice for Development and Use of Oil-Spill
Trajectory Models |
漏洒油轨迹模型的发展和应用规范 |
F2068-03 |
Standard Specification for Femoral Prostheses—Metallic
Implants |
大腿股假体金属植入物的标准规范 |
F2069-00 |
Standard Practice for Evaluation of Explosives Vapor
Detectors |
评估爆炸性烟雾探测器的实施规程 |
F2070-00(2006) |
Standard Specification for Transducers, Pressure and
Differential, Pressure, Electrical and Fiber-Optic |
压力传感器、微分传感器、电压力传感器和纤维光学压力传感器的规范 |
F2071-00(2006) |
Standard Specification for Switch, Position Proximity
(Noncontact) or Limit (Mechanical Contact), Fiber-Optic |
位置接近(不接触)或限制(机械连接)的纤维光学开关规范 |
F2072-01 |
Standard Practice for Hosedown of a Membrane Switch |
薄膜开关软管洗涤的标准实施规程 |
F2073-01(2006) |
Standard Test Method for Non-Destructive Short Circuit Testing
of a Membrane Switch |
薄膜开关无损短路检验的标准试验方法 |
F2075-04 |
Standard Specification for Engineered Wood Fiber for Use as a
Playground Safety Surface Under and Around Playground Equipment |
置于运动场设备下面和周围的用作运动场安全表面的工程木纤维的标准规范 |
F2076-01(2006) |
Standard Practice for Communicating an EMS Patient Report to
Receiving Medical Facilities |
EMS病人报告关于接收医疗设备的通知的标准实施规程 |
F2077-03 |
Test Methods For Intervertebral Body Fusion Devices |
椎间体融合设备的试验方法 |
F2078-01 |
Standard Termninology Relating to Hydrogen Embrittlement
Testing |
氢脆化试验的相关标准术语 |
F2079-02 |
Standard Test Method for Measuring Intrinsic Elastic Recoil of
Balloon-Expandable Stents |
气球反冲力测量的标准试验方法.可膨胀幅度 |
F2080-05 |
Standard Specification for Cold-Expansion Fittings With Metal
Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe |
交联聚乙烯管用带金属压合套筒的冷膨胀配件标准规范 |
F2081-01 |
Standard Guide for Characterization and Presentation of the
Dimensional Attributes of Vascular Stents |
维管展幅尺寸属性的特征描述和表示的标准指南 |
F2082-06 |
Standard Test Method for Determination of Transformation
Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free
Recovery |
通过弯曲和自由回复测定镍钛成型记忆合金转变温度的标准试验方法 |
F2083-06a |
Standard Specification for Total Knee Prosthesis |
全膝关节假体标准规范 |
F2084-01 |
Standard Guide for Collecting Containment Boom Performance Data
in Controlled Environments |
受控环境中安全壳吊杆性能数据采集的标准指南 |
F2085-06 |
Standard Consumer Safety Specification for Portable Bed Rails |
便携式床围栏的消费者安全标准规范 |
F2086-01 |
Standard Test Method for Pass Through Flux of Circular Magnetic
Sputtering Targets, Method 2 |
圆形磁性溅涂靶磁通量的标准试验方法2 |
F2087-01 |
Standard Specification for Packing, Fiberglass, Braided, Rope,
and Wick |
玻璃纤维编织绳和油绳的包装标准规范 |
F2088-03 |
Standard Consumer Safety Specification for Infant Swings |
婴幼儿秋千的标准消费者安全规范 |
F2089-01 |
Standard Guide for Language Interpretation Services |
语言说明服务的标准指南 |
F2090-01a |
Specification for Window Fall Prevention Devices With Emergency
Escape (Egress) Release Mechanisms |
带有紧急逃生分离机构的防窗跌落装置的规范 |
F2091-01(2006) |
Standard Specification for Acetabular Prostheses |
髋臼假体规格 |
F2092-01 |
Standard Specification for Convection Oven Gas or Electric |
燃气或电对流炉标准规范 |
F2093-01e1 |
Standard Test Method for Performance of Rack Ovens |
搁架式烤炉的性能标准试验方法 |
F2094-03a |
Standard Specification for Silicon Nitride Bearing Balls |
氮化硅轴承滚珠标准规范 |
F2095-01 |
Standard Test Methods for Pressure Decay Leak Test for Nonporous
Flexible Packages With and Without Restraining Plates |
有或无约束板的无孔挠性包装件压力下降泄漏试验的标准试验方法 |
F2096-04 |
Standard Test Method for Detecting Gross Leaks in Medical
Packaging by Internal Pressurization (Bubble Test) |
通过内部加压(鼓泡试验)检测有孔医用包装毛损的标准试验方法 |
F2097-05 |
Standard Guide for Design and Evaluation of Primary Packaging
for Medical Products |
医疗产品用基本包装设计和评价指南 |
F2098-04e1 |
Standard Specification for Stainless Steel Clamps for Securing
SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings |
保证SDR9交联聚乙烯(PEX)管用金属插件安全的不锈钢夹子的标准规范 |
F2099-01 |
Standard Guide for Use of Universal Transverse Mercator (UTM)
Grids When Preparing and Using a Field Map for Land Search |
陆地探查用实测原图的准备和使用时统一横墨卡托投影网格的使用标准指南 |
F2100-04 |
Standard Specification for Performance of Materials Used in
Medical Face Masks |
医用面罩材料的性能标准规范 |
F2101-01 |
Standard Test Method for Evaluating the Bacterial Filtration
Efficiency (BFE) of Medical Face Mask Materials, Using a Biological
Aerosol of Staphylococcus aureus |
用金黄色葡萄球菌的生物气溶胶评定医用面罩材料细菌过滤效果(BFE)的标准试验方法 |
F2102-06e1 |
Standard Guide for Evaluating the Extent of Oxidation in
Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for
Surgical Implants |
评定外科植入物用超高分子量聚乙烯加工式样氧化程度的标准指南 |
F2103-01 |
Standard Guide for Characterization and Testing of Chitosan
Salts as Starting Materials Intended for Use in Biomedical and
Tissue-Engineered Medical Product Applications |
作物生物化学和组织工程医疗产品原材料的脱乙酰壳多糖盐的表征和试验标准指南 |
F2105-06 |
Standard Test Method for Measuring Air Performance
Characteristics of Vacuum Cleaner Motor/Fan Systems |
测量真空吸尘器发动机/风扇系统的空气性能特性的标准试验方法 |
F2106-03 |
Standard Test Methods for Evaluating Design and Performance
Characteristics of Motorized Treadmills |
装有发动机的自行车设计和性能特征评定的标准试验方法 |
F2107-01e1 |
Standard Guide for Construction and Maintenance of Skinned Areas
on Sports Fields |
运动场没有草皮部分的建造和维护标准指南 |
F2108-01 |
Standard Practice for Inspection of Transparent Parts by
Prism |
用棱镜对透光部分的检验标准操作规程 |
F2109-01(2005) |
Standard Test Method to Determine Color Change and Staining
Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard
Surfaces |
测定由于飞行器维修试剂作用于飞行器座舱内部硬表面上而引起的颜色变化和锈蚀的标准试验方法 |
F2111-01a(2005)e1 |
Standard Practice for Measuring Intergranular Attack or End
Grain Pitting on Metals Caused by Aircraft Chemical Processes |
测量由于飞行器化学处理引起的对金属的粒间冲击或端面晶粒点蚀的标准实施规范 |
F2112-02 |
Standard Terminology for Membrane Switches |
薄膜开关术语 |
F2113-01e1 |
Standard Guide for Analysis and Reporting the Impurity Content
and Grade of High Purity Metallic Sputtering Targets for Electronic Thin
Film Applications |
薄膜电子设备用高纯度金属溅涂靶杂质含量和等级的分析和报告标准指南 |
F2114-02 |
Standard Guide for ASTM Standard Test Methods, Standard
Practices, and Typical Values of a Membrane Switch |
薄膜开关的ASTM标准试验方法,惯例和典型评价指南 |
F2115-05 |
Standard Specification for Motorized Treadmills |
装有发动机的踏车规范 |
F2116-01 |
Standard Specification for Low Stretch and Static Kernmantle
Life Safety Rope |
底强度和静态的夹心安全绳规范 |
F2117-01 |
Standard Test Method for Vertical Rebound Characteristics of
Sports Surface/Ball Systems; Acoustical Measurement |
球类运动场垂直回弹特性的标准试验方法.声学测量 |
F2118-03 |
Test Method for Constant Amplitude of Force Controlled Fatigue
Testing of Acrylic Bone Cement Materials |
丙烯骨料水泥材料力控疲劳试验恒定幅值的测试方法 |
F2119-01 |
Standard Test Method for Evaluation of MR Image Artifacts from
Passive Implants |
从被动移植评估磁共振图像人造物品的试验方法 |
F2120-06 |
Standard Practice for Testing Treestand Load Capacity |
测试树顶支架负荷能力的标准实施规程 |
F2121-05 |
Standard Practice for Treestand Labels |
树顶支架标签的标准实施规程 |
F2122-05 |
Standard Practice for Treestand Safety Devices |
树顶支架安全设备的标准实施规程 |
F2123-05 |
Standard Practice for Treestand Instructions |
树顶支架说明的标准实施规程 |
F2124-05 |
Standard Practice for Testing Ladder Treestand, Tripod Treestand
and Climbing Stick Load Capacity |
梯形树顶支架、三角形树顶支架和提升木棍负荷能力试验的标准实施规程 |
F2125-05e1 |
Standard Test Method for Treestand Static Stability and
Adherence |
静态稳定性的标准试验方法 |
F2126-06 |
Standard Test Method for Treestand Static Load Capacity |
静态负荷能力的标准试验方法 |
F2128-05 |
Standard Test Method for Treestand Repetitive Loading
Capability |
反复荷载能力的标准试验方法 |
F2129-06 |
Standard Test Method for Conducting Cyclic Potentiodynamic
Polarization Measurements to Determine the Corrosion Susceptibility of
Small Implant Devices |
进行循环动电位极化测量以测定小型植入装置的腐蚀敏感性的标准试验方法 |
F2130-01 |
Standard Test Method for Measuring Repellency, Retention, and
Penetration of Liquid Pesticide Formulation Through Protective Clothing
Materials |
测量防护服材料对液体杀虫剂的排斥性、抑制能力和渗透性的标准试验方法 |
F2131-02 |
Standard Test Method forIn Vitro Biological Activity of
Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) Using the W-20
Mouse Stromal Cell Line |
用W-20老鼠基体细胞线法测定人体骨骼形态蛋白质-2(rhBMP-2)的试管生物活性的试验方法 |
F2132-01 |
Standard Specification for Puncture Resistance of Materials Used
in Containers for Discarded Medical Needles and Other Sharps |
废弃医用针头和其它尖锐物用的容器使用的材料抗穿透性的标准规范 |
F2133-01 |
Standard Test Methods for Determining Effects of Large
Hydrocarbon Pool Fires on Insulated Marine Bulkheads and Decks,
Constructed of Steel |
测定钢结构的绝缘船舱壁和甲板的防火效果的标准试验方法 |
F2135-01 |
Standard Specification for Molded Drain, Waste, and Vent (DWV)
Short-Pattern Plastic Fittings |
模制排水、污物和通风的短型塑料配件标准规范 |
F2136-05 |
Standard Test Method for Notched, Constant Ligament-Stress
(NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or
HDPE Corrugated Pipe |
测定HDPE树脂或HDPE波纹管抗慢性断裂的凹口恒定带状应力试验的标准试验方法 |
F2137-04 |
Standard Practice for Measuring the Dynamic Characteristics of
Amusement Rides and Devices |
娱乐骑座设备和娱乐设备动力特性测量惯例 |
F2138-01e1 |
Standard Specification for Excess Flow Valves for Natural Gas
Service |
天然气设备用溢流阀标准规范 |
F2140-01 |
Standard Test Method for Performance of Hot Food Holding
Cabinets |
食品保温箱性能试验方法 |
F2141-01 |
Standard Test Method for Performance of Hot Deli Cases |
熟食加热装置性能试验方法 |
F2142-01 |
Standard Test Method for Performance of Drawer Warmers |
抽屉式加热器性能试验方法 |
F2143-04 |
Standard Test Method for Performance of Refrigerated Buffet and
Preparation Tables |
冷藏餐具柜和食品准备桌性能的标准试验方法 |
F2144-05 |
Standard Test Method for Performance of Large Open Vat Fryers |
大的敞口式深油煎锅性能的标准试验方法 |
F2145-01 |
Standard Specification for Polyamide 11 (PA 11) Mechanical
Fittings for Use on Outside Diameter Controlled Polyamide 11 Pipe and
Tubing |
外径受控的聚酰胺11管用聚酰胺11(PA
11)机械配件标准规范 |
F2146-01 |
Standard Specification for Wrought
Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant
Applications (UNS R56320) |
外科植入用的锻造Ti3Al2.5V合金无缝管规范(UNS R56320) |
F2147-01(2006) |
Standard Practice for Guinea Pig: Split Adjuvant and Closed
Patch Testing for Contact Allergens |
豚鼠接触性过敏原分裂辅助剂和封闭部分试验规程 |
F2148-01 |
Standard Practice for Evaluation of Delayed Contact
Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA) |
用鼠科动物局部淋巴结化验评估延时接触性超敏反应 |
F2149-01 |
Standard Test Method for Automated Analyses of Cells—the
Electrical Sensing Zone Method of Enumerating and Sizing Single Cell
Suspensions |
细胞自动分析试验方法-列举和大小排列单一悬浮细胞的电感地带方法 |
F2150-02e1 |
Standard Guide for Characterization and Testing of Biomaterial
Scaffolds Used in Tissue-Engineered Medical Products |
用于组织功能医学产品的生物材料骨骼测试和描述指南 |
F2151-01 |
Standard Practice for Assessment of White Blood Cell Morphology
After Contact with Materials |
与物质接触后白细胞形态评估标准惯例 |
F2152-01 |
Standard Guide for In-Situ Burning of Spilled Oil:
Fire-Resistant Boom |
溢出石油就地燃烧指南:防火栅 |
F2153-01 |
Standard Test Method for Measurement of Backpack Capacity |
背负量测量试验方法 |
F2154-01 |
Standard Specification for Sound-Absorbing Board, Fibrous Glass,
Perforated Fibrous Glass Cloth Faced |
多孔纤维玻璃布面的纤维玻璃吸声板标准规范 |
F2155-01 |
Standard Specification for Performance of Hasps and Other
Attachment Devices for Padlocks or Seals |
扣锁或密封用搭扣和其他固定装置性能的标准规范 |
F2156-01 |
Standard Test Method for Measuring Optical Distortion in
Transparent Parts Using Grid Line Slope |
利用坐标线斜率测量透明部件中光学失真的标准试验方法 |
F2157-02 |
Standard Specification for Synthetic Surfaced Running Tracks |
合成表面跑道规范 |
F2158-01 |
Standard Specification for Residential Central-Vacuum Tube and
Fittings |
住宅中央真空管道和部件规范 |
F2159-05 |
Standard Specification for Plastic Insert Fittings Utilizing a
Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing |
与SDR9交联聚乙烯管连接的用铜质环固定的塑料插入式管件规范 |
F2160-05 |
Standard Specification for Solid Wall High Density Polyethylene
(HDPE) Conduit Based on Controlled Outside Diameter (OD) |
(OD)外径受控的实心壁高密度聚乙烯导管标准规范 |
F2161-01 |
Standard Guide for Instrument and Precision Bearing
Lubricants-Part 1 Oils |
轴承润滑剂测量仪器及精度的标准指南.第1部分:油 |
F2162-01e2 |
Standard Specification for Bearing, Roller, Needle: Drawn Outer
Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard
Type |
滚针滚柱轴承标准规范:拉制外环、完全配套、无内环、开端和闭端、标准型 |
F2163-01e1 |
Standard Specification for Ring, Bearing, Inner: for Needle
Roller Bearing With Drawn Outer Ring |
带拉制外环的滚针滚柱轴承用轴承内环标准规范 |
F2164-02 |
Standard Practice for Field Leak Testing of Polyethylene (PE)
Pressure Piping Systems Using Hydrostatic Pressure |
用于流体静压下的聚乙烯(PE)压力管系统地下渗漏试验惯例 |
F2165-02 |
Standard Specification for Flexible Pre-Insulated Piping |
柔性预绝缘管规范 |
F2167-05b |
Standard Consumer Safety Specification for Infant Bouncer
Seats |
未成年人用弹跳座椅的消费者标准安全规范 |
F2168-02 |
Standard Specification for Packing Material, Graphitic,
Corrugated Ribbon or Textured Tape, and Die-Formed Ring |
波纹带或变形丝,和模压成形环石墨包装材料规范 |
F2169-02 |
Standard Specification for Resilient Stair Treads |
弹性楼梯踏板规范 |
F2170-02 |
Standard Test Method for Determining Relative Humidity in
Concrete Floor Slabs Using in situ Probes |
用现场探测器测定混凝土地板路面的相对湿度的试验方法 |
F2171-02 |
Standard Guide for Defining the Performance of First Aid
Providers in Occupational Settings |
职业设置中急救提供者的职责定义指南 |
F2172-02 |
Standard Specification for Blood/Intravenous Fluid/Irrigation
Fluid Warmers |
血液/静脉注射液/灌洗液加温装置规范 |
F2174-02 |
Standard Practice for Verifying Acoustic Emission Sensor
Response |
检验声音发射传感器回应实施规程 |
F2175-02 |
Standard Specification for Portable Escape Ladder for
Residential Use |
住宅用便携式救生梯规范 |
F2176-02 |
Standard Specification for Mechanical Couplings Used on
Polyethylene Conduit, Duct and Innerduct |
塑料管道,排水管和内部排水管的机械性管接规范 |
F2178-02 |
Standard Test Method for Determining The Arc Rating Of Face
Protective Products |
测定面部保护产品弧度的试验方法 |
F2179-02 |
Standard Specification for Annealed Soda-Lime-Silicate Glass
Containers That Are Produced for Use as Candle Containers |
制造用作蜡烛容器的加强苏打-石灰-硅酸盐玻璃容器规程 |
F2180-02 |
Standard Specification for Metallic Implantable Strands and
Cables |
s可植入金属绳和电缆规范 |
F2181-02a |
Standard Specification for Wrought Seamless Stainless Steel
Tubing for Surgical Implants |
外科移植用锻造无缝钢管规范 |
F2182-02a |
Standard Test Method for Measurement of Radio Frequency Induced
Heating Near Passive Implants During Magnetic Resonance Imaging |
测定在磁共振成像中靠近被植入物导致发热的无线电频率的试验方法 |
F2183-02 |
Standard Test Method for Small Punch Testing of Ultra-High
Molecular Weight Polyethylene Used in Surgical Implants |
用于外科移植的超高分子量重聚乙烯的小型冲压试验的测试方法 |
F2184-02 |
Standard Guide for Installation of Paintball Barrier Netting |
彩弹球拦网安装指南 |
F2187-02 |
Standard Test Method for Determining the Effect of Random
Frequency Vibration on a Membrane Switch or Membrane Switch Assembly |
测定隔膜开关或隔膜开关组配随机频率振动影响的实验方法 |
F2188-02 |
Standard Test Method for Determining the Effect of Variable
Frequency Vibration on a Membrane Switch or Membrane Switch Assembly |
测定隔膜开关或隔膜开关组配可变频率振动影响的试验方法 |
F2191-02 |
Standard Specification for Packing Material, Graphitic or Carbon
Braided Yarn |
包装材料用石墨或碳编织纱规范 |
F2192-05 |
Standard Test Method for Determining and Reporting the Berthing
Energy and Reaction of Marine Fenders |
测定和报告船舶护舷材锚泊能量和反作用的试验方法 |
F2193-02 |
Standard Specifications and Test Methods for Components Used in
the Surgical Fixation of the Spinal Skeletal System |
用于外科脊椎骨骼系统固定的部件的标准规范和测试方法 |
F2194-06 |
Standard Consumer Safety Specification for Bassinets and
Cradles |
摇篮的消费者安全规范 |
F2195-03e1 |
Standard Specification for Linoleum Floor Tile |
油毡地面砖规范 |
F2196-02 |
Standard Specification for Circulating Liquid and Forced Air
Patient Temperature Management Devices |
流体和强迫通风病人温度管理系统的循环流通规范 |
F2199-02 |
Standard Test Method for Determining Dimensional Stability of
Resilient Floor Tile after Exposure to Heat |
测定弹性地板砖暴露在热条件下的尺寸稳定性的试验方法 |
F2200-05 |
Standard Specification for Automated Vehicular Gate
Construction |
自动车门结构规范 |
F2201-02e1 |
Standard Consumer Safety Specification for Utility Lighters |
公共照明物的消费者安全规范 |
F2202-02 |
Standard Specification for Slow Cook/Hold Ovens and Hot Food
Holding Cabinets |
缓慢烹调/热烤箱和盛放热食物隔架的规范 |
F2203-02e1 |
Standard Test Method for Linear Measurement Using Precision
Steel Rule |
用刻度钢尺子进行直线长度测量的试验方法 |
F2204-02 |
Standard Guide for Describing Shoreline Response Techniques |
描述海岸线反应技术指南 |
F2205-02 |
Standard Guide for Ecological Considerations for the Use of
Chemical Dispersants in Oil Spill Response: Tropical Environments |
生态考虑热带环境下用化学分散剂于油泄漏的响应指南 |
F2206-02 |
Standard Specification for Fabricated Fittings of Butt-Fused
Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or
Block Stock |
端面热熔聚乙烯塑料管,配件,薄片库存,金属片库存,或块库存制成装置的规范 |
F2207-02 |
Standard Specification for Cured-in-Place Pipe Lining System for
Rehabilitation of Metallic Gas Pipe |
用于金属煤气管修复的准地方处理管衬套系统规范 |
F2208-02e1 |
Standard Specification for Pool Alarms |
游泳池警告规范 |
F2209-03 |
Standard Guide for Training of Level I Land Search Team
Member |
等级Ⅰ地面搜寻人员培训指南 |
F2210-02 |
Standard Guide for Processing Cells, Tissues, and Organs for Use
in Tissue Engineered Medical Products |
用于医用组织加固产品的细胞,组织和器官的处理指南 |
F2211-04 |
Standard Classification for Tissue Engineered Medical Products
(TEMPs) |
医用组织加固产品的标准分类 |
F2212-02 |
Standard Guide for Characterization of Type I Collagen as a
Starting Material for Surgical Implants and Substrates for Tissue
Engineered Medical Products (TEMPs) |
医用组织加固产品外科移植和培养基中作为开始材料的类型Ⅰ胶原质的描述指南 |
F2213-06 |
Standard Test Method for Measurement of Magnetically Induced
Torque on Medical Devices in the Magnetic Resonance Environment |
测定在电磁共振环境被植入物磁导致扭矩的试验方法 |
F2214-02 |
Standard Test Method forIn Situ Determination of Network
Parameters of Crosslinked Ultra High Molecular Weight Polyethylene
(UHMWPE) |
现场测定交联超分子量重聚乙烯的网状结构参数的试验方法 |
F2215-05e2 |
Standard Specification for Balls, Bearings, Ferrous and
Nonferrous for Use in Bearings, Valves, and Bearing Applications |
用作轴承,阀门的铁的和非铁的球头,轴承规范 |
F2216-05 |
Standard Specification for Selectorized Strength Equipment |
可调节健身器材规范 |
F2217-02 |
Standard Practice for Coating/Adhesive Weight Determination |
涂料/粘合剂重量法检测惯例 |
F2218-02 |
Standard Guide for Hardware Implementation for Computerized
Systems |
计算机化系统硬件执行指南 |
F2219-05 |
Test Methods for Measuring High-Speed Bat Performance |
测量高速棒球棍性能要素试验方法 |
F2220-02 |
Standard Specification for Headforms |
头型规范 |
F2223-04 |
Standard Guide for ASTM Standards on Playground Surfacing |
ASTM标准对活动场地表面平整指南 |
F2224-03 |
Standard Specification for High Purity Calcium Sulfate
Hemihydrate or Dihydrate for Surgical Implants |
医用高纯水合硫酸钙或二水硫酸钙规范 |
F2225-06 |
Standard Safety Specification for Consumer Trampoline
Enclosures |
消费者使用蹦床围栏安全规范 |
F2226-03 |
Standard Practice for Determining the Adhesion of Prints and
Laminating Films |
测定印刷品和层压薄膜的粘附力惯例 |
F2227-02 |
Standard Test Method for Non-Destructive Detection of Leaks in
Non-sealed and Empty Medical Packaging Trays by CO2 Tracer Gas Method |
用C02探漏气体法无损检测未封口和空医用包装浅盘的泄漏的试验方法 |
F2228-02 |
Standard Test Method for Non-Destructive Detection of Leaks in
Medical Packaging Which Incorporates Porous Barrier Material by CO2 Tracer
Gas Method |
用C02探漏气体法无损检测结合多孔渗水阻碍材料的医用包装的泄漏的实验方法 |
F2229-02 |
Standard Specification for Wrought, Nitrogen Strengthened
23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar
and Wire for Surgical Implants (UNS S29108) |
医用锻造氮保护加强23Mn21Cr1MoNi不锈钢合金棒材和线材规范(UNS R29108) |
F2230-02 |
Standard Guide for In-situ Burning of Oil Spills on Water: Ice
Conditions |
在水中-冰情况下油泄漏的现场燃烧指南 |
F2231-02e1 |
Standard Test Method for Charpy Impact Test on Thin Specimens of
Polyethylene Used in Pressurized Pipes |
用于加压管的薄聚乙烯样本摆锤式冲击试验的测试方法 |
F2232-03 |
Standard Test Method for Determining the Longitudinal Load
Required to Detach High Heels from Footwear |
测定从鞋上分开高跟需要的纵向加载的测试方法 |
F2233-03 |
Standard Guide for Safety, Access Rights, Construction,
Liability, and Risk Management for Optical Fiber Networks in Existing
Sewers |
在现有下水道中光纤网络的安全,访问权,建设,责任和风险管理指南 |
F2234-03 |
Standard Specification for Portable Gasoline and Kerosine Spill
Resistant Fueling Systems for Consumer Use |
用户使用的便携式汽油和柴油抗漏加油系统规范 |
F2236-03 |
Standard Consumer Safety Specification for Soft Infant
Carriers |
软的婴儿搬运工具 |
F2237-03 |
Standard Test Method for Performance of Upright Overfired
Broilers |
立式过烧烤炉性能的测试方法 |
F2238-03 |
Standard Test Method for Performance of Rapid Cook Ovens |
快速烹调烤箱性能规范 |
F2239-03e1 |
Standard Test Method for Performance of Conveyor Broilers |
传送带式烤炉性能测试方法 |
F2240-05 |
Standard Specification for Manufacturer Quality Assurance
Program for Powered Parachute Aircraft |
动力降落伞飞行器制造质量保证计划规范 |
F2241-05a |
Standard Specification for Continued Airworthiness System for
Powered Parachute Aircraft |
动力降落伞飞行器持续耐飞性系统规范 |
F2242-05 |
Standard Specification for Production Acceptance Testing System
for Powered Parachute Aircraft |
动力降落伞飞行器生产接收测试系统规范 |
F2243-05 |
Standard Specification for Required Product Information to be
Provided with Powered Parachute Aircraft |
与动力降落伞飞行器一起提供的必须产品信息规范 |
F2244-05 |
Standard Specification for Design and Performance Requirements
for Powered Parachute Aircraft |
动力降落伞飞行器设计和性能必需条件规范 |
F2245-04 |
Standard Specification for Design and Performance of a Light
Sport Airplane |
轻型娱乐飞机的设计和性能规范 |
F2246-03 |
Standard Specification for Bearing, Roller, Needle: Thick Outer
Ring With Rollers and Cage |
轴承,滚柱,滚针规范:厚外环有辊和罩 |
F2247-03 |
Standard Test Method for Metal Doors Used in Blast Resistant
Applications (Equivalent Static Load Method) |
用于抗爆炸应用的金属门的测试方法(等静载重法) |
F2248-03 |
Standard Practice for Specifying an Equivalent 3-Second Duration
Design Loading for Blast Resistant Glazing Fabricated with Laminated
Glass |
详细说明层压玻璃制成的防爆玻璃制品相当于3秒持续时间的设计负载惯例 |
F2249-03 |
Standard Specification for In-Service Test Methods for Temporary
Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and
Equipment |
用于切断电源线和设备的临时接地跨接装置的使用中测试方法的规范 |
F2250-03 |
Standard Practice for Evaluation of Chemical Resistance of
Printed Inks and Coatings on Flexible Packaging Materials |
打印在柔软包装材料上的墨和涂层的抗化学性评估惯例 |
F2251-03e1 |
Standard Test Method for Thickness Measurement of Flexible
Packaging Material |
柔软包装材料的厚度测量的试验方法 |
F2252-03 |
Standard Practice for Evaluating Ink or Coating Adhesion to
Flexible Packaging Materials Using Tape |
评估用胶布粘连墨或涂层与柔软包装的惯例 |
F2255-05 |
Standard Test Method for Strength Properties of Tissue Adhesives
in Lap-Shear by Tension Loading |
搭接剪切中压力负载组织粘合剂的强度性能的测试方法 |
F2256-05 |
Standard Test Method for Strength Properties of Tissue Adhesives
in T-Peel by Tension Loading |
T型剥离中压力负载组织粘合剂强度性能的测试方法 |
F2257-03 |
Standard Specification for Wrought Seamless or Welded and Drawn
18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing
for Surgical Implants (UNS S31673) |
外科植入用锻造无缝或焊接和拉伸18Cr14Ni2.5Mo不锈钢小直径管(UNS S31673) |
F2258-05 |
Standard Test Method for Strength Properties of Tissue Adhesives
in Tension |
拉力下组织粘合剂的强度性能的测试方法 |
F2259-03 |
Standard Test Method for Determining the Chemical Composition
and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR)
Spectroscopy |
通过质子核磁共振(1H NMR)光谱测定藻酸盐中化学成分和序 |
F2260-03 |
Standard Test Method for Determining Degree of Deacetylation in
Chitosan Salts by Proton Nuclear Magnetic Resonance (1H NMR)
Spectroscopy |
通过质子核磁共振(1H NMR)光谱测定脱乙酰壳多糖盐的脱乙酰作用的测试方法 |
F2261-06 |
Standard Test Method for Pressure Rating Poly(Vinyl Chloride)
(PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type |
压力定额氯化聚氯乙烯(CPVC)塑料管配件(40号和80号表) |
F2262-05 |
Standard Specification for Crosslinked
Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled
SDR9 |
受控的SDR9的交联的聚乙烯/铝/交联的聚乙烯管OD规范 |
F2263-05 |
Standard Test Method for Evaluating the Oxidative Resistance of
Polyethylene (PE) Pipe to Chlorinated Water |
评估装含氯水的聚乙烯管抗氧化性的测试方法 |
F2264-03 |
Standard Consumer Safety Specification for Non-Powered
Scooters |
无动力装置单脚滑行车用户安全规范 |
F2266-03 |
Standard Specification for Masses Used in Testing Rescue Systems
and Components |
用于测试营救系统和组件的主体的规范 |
F2267-04 |
Standard Test Method for Measuring Load Induced Subsidence of an
Intervertebral Body Fusion Device Under Static Axial Compression |
测试在静态轴挤压下椎间体融合设备的负载导致下陷的试验方法 |
F2268-03 |
Standard Specification for Bicycle Serial Numbers |
自行车序列号规范 |
F2269-03 |
Standard Guide for Maintaining Warm Season Turfgrasses on
Athletic Fields |
田径场暖季草皮草维护指南 |
F2270-04 |
Standard Guide for Construction and Maintenance of Warning Track
Areas on Sports Fields |
在运动场警告轨道区域的建设和维护指南 |
F2271-03 |
Standard Specification for Paintball Marker Barrel Blocking
Devices |
彩弹球标示管阻塞装置规范 |
F2272-03 |
Standard Specification for Paintball Markers (Limited Modes) |
彩弹球标记规范(有限模式) |
F2273-03 |
Standard Test Methods for Bicycle Forks |
自行车叉架的测试方法 |
F2274-03 |
Standard Specification for Condition 3 Bicycle Forks |
条件3下自行车叉架规范 |
F2275-03 |
Standard Practice for Treestand Manufacturer Quality Assurance
Program |
树顶支架制造商质量保证体系惯例 |
F2276-05 |
Standard Specification for Fitness Equipment |
健身器材规范 |
F2277-03 |
Standard Test Methods for Evaluating Design and Performance
Characteristics of Selectorized Strength Equipment |
评估可调节健身器材设计和性能描述的测试方法 |
F2278-03 |
Standard Test Method for Evaluating Paintball Barrier Netting |
评估彩弹球栅栏网的测试方法 |
F2279-06 |
Standard Practice for Quality Assurance in the Manufacture of
Fixed Wing Light Sport Aircraft |
轻型娱乐飞机制造中质量保证规范 |
F2280-06 |
Standard Specification for Twist Off Type Tension Control
Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi
Minimum Tensile Strength |
对开式张力控制结构扭曲螺栓/螺母/垫圈集会、钢铁、热处理、150计费最小抗拉强度的标准规范 |
F2281-04 |
Standard Specification for Stainless Steel and Nickel Alloy
Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature
Applications |
抗热和高温用的不锈钢和镍合金螺栓,六角帽螺钉,和螺柱螺栓规范 |
F2282-03 |
Standard Specification for Quality Assurance Requirements for
Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners |
机械紧固件用碳和合金钢丝,杆和棒的质量保证要求规范 |
F2283-04 |
Standard Specification for Shipboard Oil Pollution Abatement
System |
船用油减轻污染系统规范 |
F2285-04 |
Standard Consumer Safety Performance Specification for Diaper
Changing Tables for Commercial Use |
商业用途的尿布更换平台用户安全性能规范 |
F2286-05 |
Standard Design and Performance Specification for Removable Mesh
Fencing for Swimming Pools, Hot Tubs, and Spas |
游泳池、热浴桶和水疗用可拆卸网状围栏的标准设计和性能规范 |
F2291-06a |
Standard Practice for Design of Amusement Rides and Devices |
娱乐乘骑设施和装置的设计惯例 |
F2292-03e1 |
Standard Practice for Determining the Waterfastness of Images
Produced by Ink Jet Printers Utilizing Four Different Test Methods-Drip,
Spray, Submersion and Rub |
利用四种不同测试方法-滴水、喷雾、淹没和擦测定喷墨打印机打印图像的不变色性惯例 |
F2293-03 |
Standard Practice for Determining the Stain Resistance of Images
Produced by Ink Jet Printers |
测定喷墨打印机打印图像的抗污染性惯例 |
F2294-03 |
Standard Practice for Determining the Writeability of Print
Media |
打印媒介的可写性测定惯例 |
F2295-06 |
Standard Practice for Continued Operational Safety Monitoring of
a Light Sport Aircraft |
轻型娱乐飞机的持续操作安全监视惯例 |
F2296-04 |
Standard Practice for Determining the Adhesion of Lamination
Films to Prints Utilizing Mechanical Stress: Four Different Test
Methods-Score/Tape, Cross Hatch, X-Cut, and Crease-Folding |
使用机械应力对层叠薄膜在印痕上附着力的测定规程:四种不同试验方法(划痕/磁带、双向影线、X切割和折痕-折边) |
F2298-03 |
Standard Test Methods for Water Vapor Diffusion Resistance and
Air Flow Resistance of Clothing Materials Using the Dynamic Moisture
Permeation Cell |
用动力湿气渗入单元测定衣服材料的水蒸气扩散阻力和空气流动阻力的测试方法 |
F2299-03 |
Standard Test Method for Determining the Initial Efficiency of
Materials Used in Medical Face Masks to Penetration by Particulates Using
Latex Spheres |
用乳胶球测定用于被微粒渗透医疗面罩的材料的起始效率的测试方法 |
F2300-05 |
Standard Test Method for Measuring the Performance of Personal
Cooling Systems Using Physiological Testing |
用生理学测试测量个人降温系统性能的试验方法 |
F2302-03 |
Standard Performance Specification for Labeling Protective
Clothing as Heat and Flame Resistant |
抗热和燃烧的防护衣的标签规范 |
F2303-03 |
Standard Practice for Selection of Gravity Sewers Suitable for
Installation of Optical Fiber Cable and Conduits |
适合光纤电缆和管道安装的重力下水道的选择惯例 |
F2304-03 |
Standard Practice for Rehabilitation of Sewers Using Chemical
Grouting |
用化学灌浆复原下水道惯例 |
F2306/F2306M-05 |
Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular
Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for
Gravity-Flow Storm Sewer and Subsurface Drainage Applications |
自流式雨水管和地下排水装置用12至60英寸[300 to1500mm]环型波纹状异形壁聚乙烯管和配件的标准规范 |
F2307-03 |
Standard Specification for Series 10 Poly(Vinyl Chloride) (PVC)
Closed Profile Gravity Pipe and Fittings Based on Controlled Inside
Diameter |
基于控制内径的系列10聚氯乙烯封闭外形重力管及设备的标准规范 |
F2311-06 |
Standard Guide for Classification of Therapeutic Skin
Substitutes |
治疗皮肤替代品分类指南 |
F2312-04 |
Standard Termninology Relating to Tissue Engineered Medical
Products |
医用组织加固产品的相关术语 |
F2313-03 |
Standard Specification for Virgin Poly(glycolide) and
Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole
Fractions Greater Than or Equal to 70% Glycolide |
用带摩尔分数大于或等于70%乙交酯的外科植入物用纯聚乙交酯和聚乙交酯-甘醇酸树脂规格 |
F2315-03 |
Standard Guide for Immobilization or Encapsulation of Living
Cells or Tissue in Alginate Gels |
藻酸盐凝胶体中活性细胞或组织的固定或封装指南 |
F2316-03 |
Standard Specification for Airframe Emergency Parachutes for
Light Sport Aircraft |
轻型娱乐飞行器机身紧急情况降落伞规范 |
F2317/F2317M-05 |
Standard Specification for Design of Weight-Shift-Control
Aircraft |
重量转换控制飞行器设计标准规范 |
F2318-04 |
Standard Specification for Rotary Wing Basic Life Support,
Advanced Life Support, and Specialized Medical Support Air Ambulances |
旋翼式基本生命维持,高级生命维持和专门医疗生命空中救护飞机规范 |
F2319-04 |
Standard Specification for Fixed Wing Basic Life Support,
Advanced Life Support, and Specialized Medical Support Air Ambulances |
固定翼式基本生命维持,高级生命维持和专门医疗生命空中救护飞机规范 |
F2320-03 |
Standard Specification for Rubber Insulating Sheeting |
橡胶绝缘薄膜规范 |
F2321-05 |
Standard Specification for Flexible Insulated Temporary By-Pass
Jumpers |
挠性绝缘临时支路跨接线规范 |
F2322-03 |
Standard Test Methods for Physical Assault on Vertical Fixed
Barriers for Detention and Correctional Facilities |
物理攻击阻拦和修正设施竖立固定栅栏的试验方法 |
F2324-03 |
Standard Test Method for Prerinse Spray Valves |
预清洗喷雾阀的测试方法 |
F2325-03 |
Standard Classification for Multi-Layer Steel (MLS) and Other
Metal Layer Gaskets for Transportation Applications |
运输应用的多层钢和其它金属层垫圈分类 |
F2326-04 |
Standard Test Method for Collection and Analysis of Visible
Emissions from Candles as They Burn |
收集和分析燃烧时从蜡烛发出的可见光的试验方法 |
F2327-03 |
Standard Guide for Selection of Airborne Remote Sensing Systems
for Detection and Monitoring of Oil on Water |
探测和监控水上油用的机载遥感系统的选择指南 |
F2328-05 |
Standard Test Method for Determining Decarburization and
Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and
Studs |
测定硬化和回火螺纹钢螺栓,螺钉和螺柱螺栓的脱碳和渗碳的试验方法 |
F2328M-06 |
Standard Test Method for Determining Decarburization and
Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and
Studs [Metric] |
测定硬化和回火螺纹钢螺栓,螺钉和螺柱螺栓的脱碳和渗碳的试验方法(米制) |
F2329-05 |
Standard Specification for Zinc Coating, Hot-Dip, Requirements
for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts,
and Special Threaded Fasteners |
应用于碳和合金钢螺栓,螺钉,垫圈,螺母和特殊螺纹紧固件热浸镀锌要求标准规范 |
F2330-04 |
Standard Test Method for Evaluating the Oxidative Resistance of
Multilayer Polyolefin Tubing to Hot Chlorinated Water |
评估多层聚烯烃管在热氯化水中抗氧化性的试验方法 |
F2331-04 |
Standard Test Method for Determining Chemical Compatibility of
Thread Sealants with Thermoplastic Threaded Pipe and Fittings Materials |
测定螺纹密封剂与热塑料螺纹管材设备材料的化学相容性的试验方法 |
F2333-04 |
Standard Test Method for Traction Characteristics of the
Athletic Shoe-Sports Surface Interface |
运动鞋鞋面拉伸特性标准试验方法 |
F2336-05 |
Standard Guide for Roller Hockey Playing Facilities |
曲棍球运动设施标准指南 |
F2337-03 |
Standard Test Method for Treestand Fall Arrest System |
树顶支架阻止落下系统的测试方法 |
F2338-05 |
Standard Test Method for Nondestructive Detection of Leaks in
Packages by Vacuum Decay Method |
通过真空衰减方法无损检测包装中泄漏的试验方法 |
F2339-06 |
Standard Practice for Design and Manufacture of Reciprocating
Spark Ignition Engines for Light Sport Aircraft |
设计和制造轻型娱乐飞机用往复火花点火发动机的惯例 |
F2340-05 |
Standard Specification for Developing and Validating Prediction
Equation(s) or Model(s) Used in Connection with Livestock, Meat, and
Poultry Evaluation Device(s) or System(s) to Determine Value |
用于连接牲畜,肉,和家禽评估设备或体系和测定值的发展中和确定预报等式规范 |
F2341-05 |
Standard Practice for User Requirements for Livestock, Meat, and
Poultry Evaluation Devices or Systems |
牲畜,肉类,和家禽评估设备或系统的用户必要条件规范 |
F2342-06 |
Standard Specification for Design and Construction of
Composition or Quality Constituent Measuring Devices or Systems |
组成或质量要素测定设备或系统的设计和建筑规范 |
F2343-06 |
Standard Test Method for Livestock, Meat, and Poultry Evaluation
Devices |
牲畜,肉类,和家禽评估设备的测试方法 |
F2345-03 |
Standard Test Methods for Determination of Static and Cyclic
Fatigue Strength of Ceramic Modular Femoral Heads |
测定陶瓷模股骨头部静态和轮转的疲劳强度的测试方法 |
F2346-05 |
Standard Test Methods for Static and Dynamic Characterization of
Spinal Artificial Discs |
人造脊椎盘的静态和动态特性的标准试验方法 |
F2347-03 |
Standard Guide for Characterization and Testing of Hyaluronan as
Starting Materials Intended for Use in Biomedical and Tissue Engineered
Medical Product Applications |
用于生物医学和组织加固医疗产品应用作为开始材料的透明质酸酶的描述和测试指南 |
F2348-04 |
Standard Performance Specification for Privacy Padlocks |
保密挂锁的性能规范 |
F2349-04 |
Standard Practice for Operation and Maintenance of Integrated
Natural Gas Pipelines and Optical Fiber Systems |
天然气管道和光纤系统结合的操作和维护惯例 |
F2350-04 |
Standard Practice for Selection of Natural Gas Pipelines
Suitable for Installation of Optical Fiber Systems |
适合光纤系统安装的天然气管道的选择惯例 |
F2352-05 |
Standard Specification for Design and Performance of Light Sport
Gyroplane Aircraft |
轻型运动旋翼飞机的设计和性能规范 |
F2353-05 |
Standard Specification for Manufacturer Quality Assurance
Program for Lighter-Than-Air Light Sport Aircraft |
轻于空气的轻型运动飞机制造商质量保证计划规范 |
F2354-05b |
Standard Specification for Continued Airworthiness System for
Lighter-Than-Air Light Sport Aircraft |
轻于空气的轻型运动飞机持续耐飞性系统规范 |
F2355-05a |
Standard Specification for Design and Performance Requirements
for Lighter-Than-Air Light Sport Aircraft |
轻于空气的轻型运动飞机设计和性能标准规范 |
F2356-05a |
Standard Specification for Production Acceptance Testing System
for Lighter-Than-Air Light Sport Aircraft |
轻于空气的轻型运动飞机的生产接受检验系统规范 |
F2357-04 |
Standard Test Method for Determining the Abrasion Resistance of
Inks and Coatings on Membrane Switches Using the Norman Tool RCA
Abrader |
用诺曼工具RCA研磨器测定膜开关上墨和涂层抗磨损性的试验方法 |
F2358-04 |
Standard Guide for Measuring Characteristics of Sapphire
Substrates |
测量蓝宝石衬底的特征指南 |
F2359-04 |
Standard Test Method for Determining Color of a Membrane Switch
Backlit with Diffuse Light Source |
测定漫射光源用膜开关的反光的颜色的试验方法 |
F2360-04 |
Standard Test Method for Determining Luminance of a Membrane
Switch Backlit with Diffuse Light Source |
测定漫射光源用膜开关反光的亮度的试验方法 |
F2361-03 |
Standard Guide for Ordering Low Voltage (1000 VAC or Less)
Alternating Current Electric Motors for Shipboard Service—Up to and
Including Motors of 500 Horsepower |
船设备用低电压(1000瓦或更小)交流电发动机-达到和包含500马力的发动机订购指南 |
F2362-03 |
Standard Specification for Temperature Monitoring Equipment |
温度监控设备规范 |
F2363-04 |
Standard Specification for United States Coast Guard Type II or
IMO MARPOL 73/78 Annex IV Marine Sanitation Devices (Flow Through
Treatment) |
美国海洋巡逻队队员类型Ⅱ或附件Ⅳ海军卫生设施 |
F2366-05 |
Standard Practice for Determining the Relative Lightfastness of
Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light
Apparatus |
用疝弧灯装置测定处于窗户透射光中的喷墨打印机的相对耐光性的标准实施规程 |
F2367-04a |
Standard Specification for Labeling for Upright Brooms for
Consumer and Institutional Use |
个人和机构用竖式扫帚标签规范 |
F2368-04 |
Standard Specification for Labeling for Wet Mops for Consumer
and Institutional Use |
个人和机构用湿布标签规范 |
F2369-04 |
Standard Safety Specification for Non-Integral Firearm Locking
Devices |
非完整火器锁紧装置安全规范 |
F2370-05 |
Standard Test Method for Measuring the Evaporative Resistance of
Clothing Using a Sweating Manikin |
用发汗人体模型测量衣服的耐蒸发性的标准试验方法 |
F2371-05 |
Standard Test Method for Measuring the Heat Removal Rate of
Personal Cooling Systems Using a Sweating Heated Manikin |
用发汗热人体模型测量人身冷却系统的散热率的标准试验方法 |
F2372-04 |
Standard Consumer Safety Performance Specification for Shopping
Carts |
购物手推车用户安全性能规范 |
F2373-05e1 |
Standard Consumer Safety Performance Specification for Public
Use Play Equipment for Children 6 Months through 23 Months |
6个月到23个月孩童的公共玩具的消费者安全性能标准规范 |
F2374-06 |
Standard Practice for Design, Manufacture, Operation, and
Maintenance of Inflatable Amusement Devices |
充气娱乐设备的设计,制造,操作和维护惯例 |
F2376-06 |
Standard Practice for Classification, Design, Manufacture,
Construction, and Operation of Water Slide Systems |
水滑道的分类,设计,制造,结构和使用的标准实施规程 |
F2378-05 |
Standard Test Method for Sealability of Sheet, Composite, and
Solid Form-in-Place Gasket Materials |
复合薄板材和固态现场成型衬垫材料的密封能力的标准试验方法 |
F2379-04 |
Standard Test Method for Energy Performance of Powered Open
Warewashing Sinks |
装有动力系统的敞开陶瓷清洗水槽的能量性能测试方法 |
F2380-04 |
Standard Test Method for Performance of Conveyor Toasters |
传送带式烤箱性能测试方法 |
F2381-04 |
Standard Test Method for Evaluating Trans-Vinylene Yield in
Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms
Intended for Surgical Implants by Infrared Spectroscopy |
用红外线分光镜评定外科植入物用辐照超高分子量聚乙烯制造形式中反式乙烯撑屈服的试验方法 |
F2382-04e1 |
Standard Test Method for Assessment of Intravascular Medical
Device Materials on Partial Thromboplastin Time (PTT) |
在部分促凝血酶原激酶时间血管内医疗设施材料评估的测试方法 |
F2383-05 |
Standard Guide for Assessment of Adventitious Agents in Tissue
Engineered Medical Products (TEMPs) |
组织工程医疗产品中附加剂评定的标准指南 |
F2384-05 |
Standard Specification for Wrought Zirconium-2.5Niobium Alloy
for Surgical Implant Applications (UNS R60901) |
用于外科植入物的锻造锆-2.5铌合金的标准规范 |
F2385-04 |
Standard Test Method for Determining Femoral Head Penetration
into Acetabular Components of Total Hip Replacement Using Clinical
Radiographs |
用临床射线照片测定股骨头部穿透到整个髋复位的髋臼组件的测试方法 |
F2386-04 |
Standard Guide for Preservation of Tissue Engineered Medical
Products (TEMPs) |
医用组织加固产品的保存指南 |
F2387-04 |
Standard Specification for Manufactured Safety Vacuum Release
Systems (SVRS) for Swimming Pools, Spas and Hot Tubs |
游泳池,水疗中心和热管用人造安全真空排放系统(SVRS)的标准规范 |
F2388-04e1 |
Standard Consumer Safety Specification for Baby Changing Tables
for Domestic Use |
家庭用婴孩换用平台用户安全规范 |
F2389-06 |
Standard Specification for Pressure-rated Polypropylene (PP)
Piping Systems |
定压力聚丙烯管道系统规范 |
F2391-05 |
Standard Test Method for Measuring Package and Seal Integrity
Using Helium as the Tracer Gas |
使用氦作为示踪气体的测量包装和密封完整性的标准试验方法 |
F2392-04 |
Standard Test Method for Burst Strength of Surgical Sealants |
外科用密封剂爆炸强度的测试方法 |
F2393-04 |
Standard Specification for High-Purity Dense Magnesia Partially
Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications |
外科植入应用的高纯度浓厚氧化镁部分稳定氧化锆规范 |
F2394-04 |
Standard Guide for Measuring Securement of Balloon Expandable
Stent Mounted on Delivery System |
安装于输送系统上气囊展幅稳当性的测量指南 |
F2395-05 |
Standard Termninology for Unmanned Air Vehicle Systems |
无人航空运载工具系统的标准术语 |
F2396-04 |
Standard Guide for Construction of High Performance Sand-Based
Rootzones for Sports Fields |
运动场的高效砂基根带的建造的标准指南 |
F2397-04a |
Standard Specification for Protective Headgear Used in Martial
Arts |
用于武术的保护头盔规范 |
F2398-04e1 |
Standard Test Method for Measuring Moment of Inertia and Center
of Percussion of a Baseball or Softball Bat |
测定棒球或垒球棒的转动惯量和冲击中心的测试方法 |
F2400-06 |
Standard Specification for Helmets Used in Pole Vaulting |
用于撑杆跳高的头盔标准规范 |
F2401-04 |
Standard Practice for Security Checkpoint Metal Detector
Screening of Persons with Medical Devices |
安全检查站金属探测器放映带医疗装置的个人的惯例 |
F2403-06 |
Standard Specification for Inch Series Machine Screws, Carbon
Steel, 60 000 psi Tensile Strength |
英寸串行计算机螺钉碳钢60000psi抗张强度的标准规范 |
F2405-04 |
Standard Test Method for Trace Metallic Impurities in High
Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer |
用高质量分辨率辉光放电质谱仪对高纯度铜中痕量金属杂质的试验方法 |
F2406-04 |
Standard Practice for Determining Yield of Solid Ink Sticks |
测定固体墨水棒的产量惯例 |
F2407-06 |
Standard Specification for Surgical Gowns Intended for Use in
Healthcare Facilities |
康复设施中要求用外科医用工作服的标准规范 |
F2408-06 |
Standard Specification for Ornamental Fences Employing
Galvanized Steel Tubular Pickets |
使用镀锌钢管的装饰栅栏规范 |
F2411-04e1 |
Standard Specification for Design and Performance of an Airborne
Sense-and-Avoid System |
空中避让系统设计和性能规范 |
F2412-05 |
Standard Test Methods for Foot Protection |
足部保护装置标准试验方法 |
F2413-05 |
Standard Specification for Performance Requirements for Foot
Protection |
足部保护装置性能要求的标准规范 |
F2414-04 |
Standard Practice for Sealing Sewer Manholes Using Chemical
Grouting |
用化学灌浆密封污水道检查孔的标准规程 |
F2415-06 |
Standard Practice for Continued Airworthiness System for Light
Sport Gyroplane Aircraft |
轻型运动旋翼飞机持续耐飞性系统惯例 |
F2416-06 |
Standard Specification for Protective Headgear Used in Electric
Personal Assistive Mobility Devices |
用于电动个人辅助机动装置保护安全帽的标准规范 |
F2417-04 |
Standard Specification for Fire Safety for Candles |
蜡烛的防火安全规范 |
F2418-05 |
Standard Specification for Polypropylene (PP) Corrugated Wall
Stormwater Collection Chambers |
聚丙烯波纹壁雨水采集容器的标准规范 |
F2419-05 |
Standard Practice for Installation of Thick Poured Gypsum
Concrete Underlayments and Preparation of the Surface to Receive Resilient
Flooring |
浓浆石膏混凝土衬底的安装以及承受弹性楼面的表面的制备的标准实施规程 |
F2420-05 |
Standard Test Method for Determining Relative Humidity on the
Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement
and Insulated Hood |
用相对湿度探针测量法和绝缘盖测定混凝土地板表面相对湿度的标准试验方法 |
F2421-05 |
Standard Test Method for Measurement of Resilient Floor Plank by
Dial Gage |
用千分表测量弹性地板的标准试验方法 |
F2423-05 |
Standard Guide for Functional, Kinematic, and Wear Assessment of
Total Disc Prostheses |
总脊面假体的功能的,运动学的和磨损的评估标准指南 |
F2425-05a |
Standard Specification for Continued Airworthiness System for
Weight-Shift-Control Aircraft |
重量转换控制航空器用持续适航性系统的标准规范 |
F2426-05a |
Standard Guide on Wing Interface Documentation for Powered
Parachute Aircraft |
动力伞降飞行器机翼接口资料的标准指南 |
F2427-05a |
Standard Specification for Required Product Information to be
Provided with Lighter-Than-Air Light Sport Aircraft |
轻于空气的轻型运动飞机要求的产品信息的标准规范 |
F2428-04 |
Standard Guide for Selection and Use for Pelvic Ring
Circumferential Compression Stabilization Devices (PRCCSD) |
骨盆环状面压缩稳定设备的选择和使用的标准指南 |
F2429-05 |
Standard Termninology Relating to Aerospace Transparent
Materials and Enclosures |
航空航天透明材料和外壳相关的标准术语 |
F2430-04 |
Standard Specification for Bearing, Roller, Needle: Assembly
(Thick Outer Race) |
滚柱轴承和滚针轴承的标准规范:装配(厚外座圈) |
F2431-04 |
Standard Specification for Ring Bearing, Inner: For Needle
Roller Bearing with Thick Outer Ring |
内部环状轴承的标准规范:带厚外圈的滚针轴承 |
F2432-04 |
Standard Specification for Ice Making Machines,
Icemaker-Dispensers, and Ice Dispensing Equipment |
制冰机,制冰机-分配器和冰分配装置的标准规范 |
F2433-05 |
Standard Test Method for Determining Thermoplastic Pipe Wall
Stiffness |
测定热塑管壁硬挺度的标准试验方法 |
F2434-05 |
Standard Specification for Metal Insert Fittings Utilizing a
Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9
Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX)
Tubing |
SDR9交联聚乙烯(PEX)管和SDR9交联聚乙烯/铝/交联聚乙烯(PEX/AL/PEX)管用带铜卷曲环的金属内插件的标准规范 |
F2435-05 |
Standard Specification for Steel Reinforced Polyethylene (PE)
Corrugated Pipe |
钢筋聚乙烯(PE)波纹管的标准规范 |
F2436-05 |
Standard Test Method for Measuring the Performance of Synthetic
Rope Rescue Belay Systems Using a Drop Test |
用跌落试验测量合成营救绳系索系统性能的标准试验方法 |
F2438-04 |
Standard Specification for Oil Spill Response Boom Connection:
Slide Connector |
漏油反应栅连接标准规范:滑动连接器 |
F2439-06 |
Standard Specification for Headgear Used in Soccer |
英式足球用头部防护帽的标准规范 |
F2440-04 |
Standard Specification for Indoor Wall/Feature Padding |
室内墙壁/部件填充物标准规范 |
F2441-05 |
Standard Practice for Labeling of Backpacking and Mountaineering
Tents and Bivouac Sacks |
背负式帐篷以及攀登帐篷和露营袋标记的标准实施规程 |
F2443-04 |
Standard Specification for Roller, Bearing, Needle Ferrous,
Solid, Spherical End |
球端,实心和针式铁类滚柱轴承的标准规范 |
F2444-04 |
Standard Practice for Damage Prevention of Bearings, and Bearing
Components Through Proper Handling Techniques |
通过正常处理技术对轴承和轴承部件的危险防范的标准实施规程 |
F2446-04 |
Standard Classification for Hierarchy of Equipment Identifiers
and Boundaries for Reliability, Availability, and Maintainability (RAM)
Performance Data Exchange |
可靠性,有效性和可维护性数据交换用设备识别服和边界的分级结构的标准分类 |
F2447-05 |
Standard Practice for Production Acceptance Test Procedures for
Weight-Shift-Control Aircraft |
重量转移控制飞行器的生产验收试验程序的标准实施规程 |
F2448-04 |
Standard Practice for Manufacturer Quality Assurance System for
Weight-Shift-Control Aircraft |
重量转移控制飞行器用生产商质量保证体系的标准实施规程 |
F2449-05 |
Standard Specification for Manufacturer Quality Assurance
Program for Light Sport Gyroplane Aircraft |
轻型运动旋翼机用制造者质量保证程序的标准规范 |
F2450-04 |
Standard Guide for Assessing Microstructure of Polymeric
Scaffolds for Use in Tissue Engineered Medical Products |
组织工程医疗产品中使用的聚酯脚手架的微观结构评估的标准指南 |
F2451-05 |
Standard Guide forin vivo Assessment of Implantable Devices
Intended to Repair or Regenerate Articular Cartilage |
用来修复或再生关节软骨的可植入部件的活体评定的标准指南 |
F2452-04 |
Standard Practice for Determining the Adhesion of Print Media
Utilizing Mechanical Stress: Two Different Test Methods-Score/Tape and
Cross Hatch |
利用机械应力测定印刷媒体粘着性的标准规程:两种不同的试验方法,划痕/胶带法和断面线法 |
F2453/F2453M-05 |
Standard Specification for Welded Wire Mesh Fence Fabric
(Metallic-Coated or Polymer Coated) for Meshes of 6 in.2 [3871 mm2] or
Less, in Panels or Rolls, with Uniform Meshes |
板材或卷材上带均匀网眼(少于或等于6.in2[3871mm2]的焊接钢丝网(金属覆层或聚合物覆层的)标准规范 |
F2454-05 |
Standard Practice for Sealing Lateral Connections and lines from
the mainline Sewer Systems by the Lateral Packer Method, Using Chemical
Grouting |
用化学灌浆的侧向灌浆机法密封测量连接件和主要排污系统的管线的标准实施规程 |
F2456-04 |
Standard Specification for Youth-Resistant Firearms Containers
(YRFCs) |
防止青少年使用的武器箱(YRFCs)的标准规范 |
F2457-05 |
Standard Specification for Required Product Information to be
Provided with Weight-Shift-Control Aircraft |
提供重量转移控制飞行器所要求的产品信息的标准规范 |
F2458-05 |
Standard Test Method for Wound Closure Strength of Tissue
Adhesives and Sealants |
组织胶粘剂和封闭剂的伤口闭合强度的标准试验方法 |
F2459-05 |
Standard Test Method for Extracting Residue from Metallic
Medical Components and Quantifying via Gravimetric Analysis |
从金属医疗部件中提取残余物并经由化学分离侧重法确定数量的标准试验方法 |
F2462-05 |
Standard Practice for Operation and Maintenance of Sewers with
Optical Fiber Systems |
带光纤系统的下水道的运行和维护的标准实施规程 |
F2463-06 |
Standard Termninology for Livestock, Meat, and Poultry
Evaluation Systems |
家畜,肉和家禽评估系统的标准术语 |
F2464-05 |
Standard Guide for Cleaning of Various Oiled Shorelines and
Habitats |
不同的油污海岸线和场所的清洁的标准指南 |
F2465-05 |
Standard Guide for Oil Spill Dispersant Application Equipment:
Single-point Spray Systems |
漏油分散剂应用设备标准指南:单点喷射系统 |
F2466-05 |
Standard Practice for Determining Silicone Volatiles in Silicone
Rubber for Transportation Applications |
运输用硅酮橡胶中硅酮挥发物测定的标准实施规程 |
F2467-05 |
Standard Practice for Measuring Static Sealing Pressure Using
Pressure-Indicating Film (PIF) in Transportation Applications |
用运输设备中的压力指示膜测量静态密封压的标准实施规程 |
F2468-05 |
Standard Classification for Specifying Silicone Adhesives and
Sealants for Transportation Applications |
运输用硅胶粘剂和密封剂规定的标准分类 |
F2469-05 |
Standard Test Method for Measuring Optical Angular Deviation of
Transparent Parts Using the Double-Exposure Method |
用双重曝光法测量透明部件的光学角偏差的标准试验方法 |
F2471-05 |
Standard Practice for Installation of Thick Poured Lightweight
Cellular Concrete Underlayments and Preparation of the Surface to Receive
Resilient Flooring |
厚浇注轻质多孔混凝土垫层的安装和承载弹性地板表面的制备的标准实施规程 |
F2472-05 |
Standard Test Method for Performance of Staff-Serve Hot Deli
Cases |
员工服务用热熟食箱性能的标准试验方法 |
F2473-05 |
Standard Test Method for Performance of Water-Bath
Rethermalizers |
水浴再加热装置性能的标准试验方法 |
F2474-05 |
Standard Test Method for Heat Gain to Space Performance of
Commercial Kitchen Ventilation/Appliance Systems |
商业厨房通风/设备系统空间加热性能的标准试验方法 |
F2475-05 |
Standard Guide for Biocompatibility Evaluation of Medical Device
Packaging Materials |
医疗器件包装材料的生物可兼容性评价的标准指南 |
F2476-05 |
Test Method for the Determination of Carbon Dioxide Gas
Transmission Rate (Co 2TR) Through Barrier Materials Using An Infrared
Detecto |
用红外线探测器透过隔绝材料测定二氧化碳气体传输率(Co 2TR)的试验方法 |
F2482-05 |
Standard Specification for Load-Indicating Externally Threaded
Fasteners |
负荷指示外螺纹紧固件用标准规范 |
F2483-05 |
Standard Practice for Maintenance and the Development of
Maintenance Manuals for Light Sport Aircraft |
轻型运动飞行器的维修和维修手册制定的标准实施规程 |
F2488-05 |
Standard Termninology for Rolling Element Bearings |
滚动接触轴承的标准术语 |
F2489-06 |
Standard Guide for Instrument and Precision Bearing
Lubricants-Part 2 Greases |
器具和精密轴承润滑油标准指南—第2部分 润滑脂 |
F2490-05 |
Standard Guide for Aircraft Electrical Load and Power Source
Capacity Analysis |
飞行器电气载荷和电源容量分析的标准指南 |
F2491-05 |
Standard Guide for Determining Load Ratios for Technical Rescue
Systems and Equipment |
技术救援系统和设备的荷载率测定的标准指南 |
F2494-05 |
Standard Test Method for Determining Energy Consumption of
Copiers and Similar Office Imaging Equipment |
复印机和类似的办公成像设备的能量消耗测定的标准试验方法 |
F2495-05 |
Standard Test Method for Determining Energy Consumption of MFDs
with Copying Capability and Similar Office Imaging Equipment |
有复印能力的MFDs和类似的办公成像设备的能量消耗测定的标准试验方法 |
F2496-05 |
Standard Practice for Determining the Scratch Hardness and
Scrape Adhesion of Prints and Coatings |
测定印刷品和覆层的划痕硬度和擦痕粘性的标准实施规程 |
F2497-05 |
Standard Practice for Abrasion and Scuff Resistance of Inkjet
Media by the Sutherland Rub Tester |
用Sutherland式耐磨退色试验仪测定喷墨介质耐磨和耐擦]性的标准规程 |
F2498-05 |
Standard Practice for Determining the Drying Time of Inkjet
Media and Inks Using a Smudge Method |
用烟熏法测定喷墨介质和墨水的干燥时间的标准实施规程 |
F2501-06 |
Standard Practices for Unmanned Aircraft System Airworthiness |
无人飞行器系统适航性的标准实施规程 |
F2502-05 |
Standard Specification and Test Methods for Bioabsorbable Plates
and Screws for Internal Fixation Implants |
内部安装植入物用生物可吸收板和螺钉的标准规范和试验方法 |
F2503-05 |
Standard Practice for Marking Medical Devices and Other Items
for Safety in the Magnetic Resonance Environment |
磁共振环境下医疗装置和其他元件的安全标记的标准实施规程 |
F2504-05 |
Standard Practice for Describing System Output of Implantable
Middle Ear Hearing Devices |
可植入中耳的听觉设备的描述系统输出的标准实施规程 |
F2507-05 |
Standard Specification for Recreational Airpark Design |
休闲小型机场设计的标准规范 |
F2509-06 |
Standard Specification for Field-assembled Anodeless Riser Kits
for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe
and Tubing |
外径可控的聚乙烯配气管和管道上用的现场组合Anodeless Riser成套器具的规范 |
F2511-05 |
Standard Specification for Rollers, Bearing, Needle, Ferrous,
Solid |
铁索体固体滚针轴承的标准规范 |
F2516-06 |
Standard Test Method for Tension Testing of Nickel-Titanium
Superelastic Materials |
镍钛超塑料材料拉伸测试的标准试验方法 |
F2517-05 |
Standard Specification for Determination of Child Resistance of
Portable Fuel Containers for Consumer Use |
消费者用便携式燃料容器防儿童打开性测定的标准规范 |
F2518-06 |
Standard Guide for Use of a Residential Swimming Pool, Spa, and
Hot Tub Safety Audit to Prevent Unintentional Drowning |
用于防止住宅游泳池、温泉和热浴池意外溺毙的安全审核标准指南 |
F2519-05 |
Standard Test Method for Grease Particle Capture Efficiency of
Commercial Kitchen Filters and Extractors |
商用厨房过滤器和萃取器的润滑脂颗粒捕获效率的标准试验方法 |
F2520-05 |
Standard Specification for Reach-in Refrigerators, Freezers,
Combination Refrigerator/Freezers, and Thaw Cabinets |
大型冷柜,冷冻机,组合冷柜/冷冻机和解冻柜的标准规范 |
F2521-05 |
Standard Specification for Heavy-Duty Ranges, Gas and
Electric |
燃气和电重型烹调炉的标准规范 |
F2522-05 |
Standard Test Method for Determining the Protective Performance
of a Shield Attached on Live Line Tools or on Racking Rods for Electric
Arc Hazards |
测定带电线路工具或齿条上用于防电弧伤害的护罩的防护性能的标准试验方法 |
F2523-05 |
Standard Practice for Blowout Resistance of Room-Temperature
Vulcanized Elastomers |
室温下硫化人造橡胶抗爆破性能的标准实施规程 |
F2524-06 |
Standard Practice for Determination of Volatile Content for
Formed-in-Place Gaskets (FIPG) Silicone Adhesives and Sealants for
Transportation Applications |
用于运输的现场成行垫圈硅酮胶和密封剂的挥发物含量的测定的标准实施规程 |
F2527-05e1 |
Standard Specification for Wrought Seamless and Welded and Drawn
Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS
R30008, UNS R30035, UNS R30605, and UNS R31537) |
外科植入物用锻造无缝和焊接及拉制的钴合金小直径管的标准规范(UNS R30003, UNS R30008, UNS
R30035, UNS R30605, and UNS R31537) |
F2528-06 |
Standard Test Methods for Enteral Feeding Devices with a
Retention Balloon |
带压力气囊的肠给食装置标准试验方法 |
F2530-05 |
Standard Specification for Protective Headgear with Faceguard
Used in Bull Riding |
骑牛用带面罩的防护头盔标准规范 |
F2531-05 |
Standard Test Method for Load Capacity of Treestand Seats |
Treestand座负载能力的试验方法 |
F2532-06 |
Standard Guide for Determining Net Environmental Benefit of
Dispersant Use |
测定分散剂效用的静环境利益的标准指南 |
F2534-06 |
Standard Guide for Visually Estimating Oil Spill Thickness on
Water |
在视觉上评估水面油溢出稠度的标准指南 |
F2536-06a |
Standard Guide for Installing Plastic DWV Piping Suspended from
On-Grade Slabs |
安装悬吊于等内板材的塑料排水、排渣与放气管道的标准指南 |
F2542-05 |
Standard Test Methods for Physical Assault on Ventilation
Grilles for Detention and Correctional Facilities |
阻留及惩罚设施用通风栅栏的物理攻击性标准试验方法 |
F2544-06 |
Standard Test Method for Determining A-Weighted Sound Power
Level of Central Vacuum Power Units |
测定真空动力元件噪声能量级别的试验方法 |
F2547-06 |
Standard Test Method for Determining the Attenuation Properties
in a Primary X-ray Beam of Materials Used to Protect Against Radiation
Generated During the Use of X-ray Equipment |
测定用于使用X光设备期间防止辐射产生的材料在主要X光束中的衰减性能的标准试验方法 |
F2548-06 |
Standard Specification for Expanded Metal Fence Systems for
Security Purposes |
安全目的用铁丝网栅栏系统的标准规范 |
F2550-06 |
Standard Practice for Locating Leaks in Sewer Pipes Using
Electro-Scan--the Variation of Electric Current Flow Through the Pipe
Wall |
通过电扫描电流流经管壁的振动确定下水管道漏洞方位的标准实施规程 |
F2553-06 |
Standard Specification for Warnings on Refillable CO2 Cylinders
Used In the Sport of Paintball |
用于匹特博运动中适于再装的CO2枪筒警告的标准规范 |
F2555-06 |
Standard Practice for Determining Page Yield of Ink Jet Printer
Cartridges-Continuous Printing Method |
测定喷墨打印机墨盒在连续打印方式下的页数产量的标准实施规程 |
F2561-06 |
Standard Practice for Rehabilitation of a Sewer Service Lateral
and Its Connection to the Main Using a One Piece Main and Lateral
Cured-in-Place Liner |
下水道服务内衬极其连接到用一片主体和侧面现场硫化内衬的主体修复的标准实施规范 |
F2563-06 |
Standard Practice for Kit Assembly Instructions of Aircraft
Intended Primarily for Recreation |
娱乐用飞机工具箱装配说明书 |
F2564-06 |
Standard Specification for Design and Performance of a Light
Sport Glider |
轻型滑翔机的设计和性能的标准规范 |
F2565-06 |
Standard Guide for Extensively Irradiation-Crosslinked
Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical
Implant Applications |
为更广泛地引导标准辐照交联超高分子量聚乙烯材料外科植入物申请表格的标准指南 |
F2568-06 |
Standard Test Method for Measurement of Sleeping Bags |
测量睡袋的标准试验方法 |
F2573-06 |
Standard Specification for Low Velocity Resilient Material
Projectile |
低速回弹性材料投掷物的标准规范 |
F2574-06 |
Standard Specification for Low Velocity Projectile Marker |
低速投掷浮标标准规范 |
F2575-06 |
Standard Guide for Quality Assurance in Translation |
翻译中的品质保证标准指南 |
F2576-06e1 |
Standard Terminology Relating to Declarable Substances in
Materials |
材料中相关可申报物质的标准术语 |
F2584-06 |
Standard Practice for Maintenance and Development of Maintenance
Manuals for Light Unmanned Aircraft System (UAS) |
轻型无人机用维护手册的维护和发展的标准实施规程 |
F2589-06 |
Standard Specification for Ornamental Fences Employing Steel
Tubular Pickets |
使用钢管尖桩装饰栅栏的标准规范 |
F2590-06e1 |
Standard Specification for Bearing, Roller, Thrust, Two
Channeled Race Surface, Rigid or Flat Seat Type |
|
F2591-06 |
Standard Specification for Bearing, Roller, Tapered, Single Row
of Rollers (Metric Series) |
锥形单列滚子轴承标准规范(米制系列) |
F2592-06 |
Standard Test Method for Measuring the Force-Displacement of a
Membrane Switch |
测量薄膜开关的强排量的标准试验方法 |
F2599-06 |
Standard Practice for The Sectional Repair of Damaged Pipe By
Means of An Inverted Cured-In-Place Liner |
依靠现场固化内衬对损坏管道进行局部修补的标准实施规程 |
|
|
|